Panasonic DP-150 Service Manual page 90

6. F8 : Copier operating adjustment
* The missing code number is [Not Used].
Code Item
C00 Full-speed unit move
when replacing the
exposure lamp unit
C06 Machine error/paper jam
code reading
C07 Machine error/paper jam
code clear
C08 Lamp unit lock for
transportation
(For factory use)
•Electric counter and error record will
be cleared.
C10 Drum charge voltage check
Printer γ check
C18
C19 Lamp unit lock for transportation
(For market)
C20 Toner level sensor output check
C21 (Reserved)
C50 Test print
Description
Start key moves the unit by 250mm to
the end of the line.
Clear/Stop key returns it to the home position.
a) Reset key indicates the latest 10 records
of machine errors or paper jam
chronologically.
b) Reset key also indicates every 5 of the 10
records on the LCD by turns.
NOTE: With over 10 records, the latest 10
records will be saved.
a) Press Reset key and the copy
count is cleared to "0".
b) Press Start key.
a) START key moves the lamp unit to
the lock position for transportation.
(For factory adjustment)
b) "0" appears on the LCD when the
move is completed.
No keys will be accepted after the
lamp unit is locked.
NOTE: The power switch can cancel this
mode automatically and clear the
error or jam code.
The made up image is automatically checked
without paper at F3 mode.
Start key makes continuous copies.
Clear/Stop key stops the operation.
Print the half tone image pattern.
a) START key moves the lamp unit to the
lock position for transportation.
b) "0" appears on the LCD when the move
is completed.
No keys will be accepted after the lamp
unit is locked.
NOTE: The power switch can cancel this
mode automatically.
START key rotates the main motor and
stops rotating after the developer is
mixed and the toner availability is shown.
START key performs test print.
5-9