Temperature Display / Beep On Alarm - Rheem IKONIC RTGH-S11i Manual

STATUS SERVICE MODE SETTINGS
IKONIC Tankless Water Heater Service Manual
USER INTERFACE AND OPTIONS
TEMPERATURE DISPLAY
1. Press the "SETTINGS" button.
None
ENTER
STATUS SERVICE MODE
BACK
SETTINGS
2. Press the "▼" or "▲" button until "Temp Display" is
displayed, and press "ENTER" button.
Temp Display
BACK ENTER
STATUS SERVICE MODE
BACK
SETTINGS
3. The factory setting is "Fahrenheit". Press the "▼" or
"▲" button to select "Fahrenheit" or "Celsius", and
press "ENTER" to confirm. To exit this setting, press
"BACK" button until the initial screen is displayed.
BACK
SETTINGS
STATUS SERVICE MODE SETTINGS STATUS
OFF
SET POINT
BACK
SETTINGS STATUS
ENTER
STATUS SERVICE MODE
Temp Display
ENTER
STATUS SERVICE MODE
Fahrenheit
ENTER
STATUS SERVICE MODE
BACK
SETTINGS
SERVICE MODE
24
BEEP ON ALARM
1. Press the "SETTINGS" button.
ENTER
SERVICE MODE
2. Press "▼" or "▲" button until "Beep On Alarm" is dis-
played, and press "ENTER" button to confirm.
SET POINT
BACK
SETTINGS STATUS
3. The Factory setting is "NO". Press the "▼" or "▲"
button to select "NO" and "YES", and press "ENTER"
to confirm. To exit this setting, press "BACK" button
until the Home screen is displayed.
Fahrenheit
ENTER
STATUS SERVICE MODE
SETTINGS STATUS SERVICE
SET POINT
BACK
SETTINGS STATUS SERVICE
ENTER
SERVICE MODE
SET POINT
Beep On Alarm
BACK
SETTINGS STATUS
BACK
SETTINGS STATUS SERVICE
Yes
BACK
SETTINGS STATUS SERVICE
MODE
ENTER
MODE
ENTER
SERVICE MODE
ENTER
MODE
ENTER
MODE