Reset Wifi Settings - Rheem IKONIC RTGH-S11i Manual

IKONIC Tankless Water Heater Service Manual
USER INTERFACE AND OPTIONS
ENTER
STATUS SERVICE MODE
RESET WIFI SETTING
These steps are to reset the WiFi chip, in the event
that WiFi stops working and WiFi credentials are NOT
changed.
In the event that WIFI credentials are changed please fol-
low WIFI setup steps again, on page 22.
1. Press the "SERVICE" button.
BACK
SETTINGS
BACK
SETTINGS
ENTER
STATUS SERVICE MODE
2. Press the "▼" or "▲" button until "WiFi reset" is dis-
played, and press the "ENTER" button.
SETTINGS
SETTINGS
3. Press the "▼" or "▲" button until "Yes" is displayed,
and press the "ENTER" button.
SETTINGS
SET POINT
BACK ENTER
SETTINGS STATUS SERVICE MODE
SET POINT
BACK
SETTINGS STATUS
Yes
ENTER
STATUS SERVICE MODE
SET POINT
ENTER
STATUS SERVICE MODE
Yes
BACK
SETTINGS STATUS
SET POINT
BACK ENTER
STATUS SERVICE MODE
WiFi Reset
BACK ENTER
STATUS SERVICE MODE
WiFi Reset
BACK
SETTINGS STATUS
Yes
BACK ENTER
STATUS SERVICE MODE
WiFi Status
BACK
SETTINGS STATUS
36
ENTER
SERVICE MODE
4. WiFi signal will reset and WiFi will start blinking again.
WiFi will try to reconnect to the stored WiFi network
using the same credentials. Once WiFi is connected
again correctly, WiFi icon will become solid.
In the event that WIFI credentials are changed please
follow WIFI setup steps again, on page 21.
SET POINT
BACK
SETTINGS STATUS
ENTER
SERVICE MODE
ENTER
SERVICE MODE
ENTER
SERVICE MODE
WiFi Status
BACK
SETTINGS STATUS SERVICE
ENTER
SERVICE MODE
WiFi
SET POINT
BACK
SETTINGS STATUS SERVICE
Current Alarms
BACK ENTER
SETTINGS STATUS SERVICE MODE
ENTER
MODE
ENTER
MODE