Network Instance - Rheem IKONIC RTGH-S11i Manual

IKONIC Tankless Water Heater Service Manual
USER INTERFACE AND OPTIONS
2. Press the "▼" or "▲" button until "Tankless Config"
is displayed, and press "ENTER" to confirm.
Tankless Config
BACK
SETTINGS
3. Press the "▼" or "▲" button until "Manifold heaters"
is displayed, and press "ENTER" to confirm.
Manifold Heaters
BACK
SETTINGS
4. The factory setting is "1".
BACK
SETTINGS STATUS
Press the "▼" or "▲" button to select the number of
heaters of be managing "1" to "20", and press
"ENTER" to confirm. To exit this setting, press
"BACK".
BACK
SETTINGS
ENTER
STATUS SERVICE MODE
SET POINT
BACK ENTER
SETTINGS STATUS SERVICE MODE
ENTER
STATUS SERVICE MODE
OFF
ENTER
SERVICE MODE
120 °F
BACK ENTER
SETTINGS STATUS SERVICE MODE
10
ENTER
STATUS SERVICE MODE
30

NETWORK INSTANCE

1. Press the "SETTINGS" button.
Recirc.Pump Mode
BACK ENTER
SETTINGS STATUS SERVICE MODE
Press button
to access
SETTINGS
"SETTINGS"
Menus
2. Press the "▼" or "▲" button until "Network instance"
is displayed, and press "ENTER" button to confirm.
Network Instance
BACK
SETTINGS
SET POINT
BACK ENTER
SETTINGS STATUS SERVICE MODE
3. The factory setting is "1". Press the "▼" or "▲" but-
ton to select "1" to "20" for each water heater, and
press "ENTER" to confirm. To exit this setting, press
"BACK" button until the Home screen is displayed.
SET POINT
BACK ENTER
STATUS SERVICE MODE
ENTER
STATUS SERVICE MODE
115 °F
BACK ENTER
SETTINGS STATUS SERVICE MODE
10
BACK ENTER
SETTINGS STATUS SERVICE MODE