Lcd On User Interface / Setting To Enable And Disable - Rheem IKONIC RTGH-S11i Manual

USER INTERFACE AND OPTIONS
LCD ON THE USER INTERFACE
This Tankless water Heater has the Liquid Crystal Display
(LCD) on the user interface.
This user interface allows you to adjust the water tem-
perature and view the operating status or error codes.
Cloud Connectivity
Warning
Wi Fi
Diagnostic
Set Point
Temperature
SET POINT
BACK
SETTINGS
Control But-
tons
UNLOCK / LOCK (HOLD 3 SEC)
SETTING TO ENABLE/DISABLE TO WATER HEATER
This tankless water heater can set the enable/disable mode on the User Interface. When disabled the water heater will
not operate.
1. Press the "MODE" button. After the LCD displays
"ENABLE/DISABLE", press the "ENTER" button.
ENABLE/DISABLE
BACK
SETTINGS
Blower On
Recirculation On
Screen Lock
Burner On
Status Icons
ENTER
STATUS SERVICE MODE
Control But-
ton Indica-
tor Icons
ENABLE/DISABLE
ENTER
BACK
STATUS SERVICE MODE
SETTINGS STATUS SERVICE
19
2. The factory setting is "DISABLE". Press the "▼" or
"▲" button to select "ENABLE" or "DISABLE" and
press the "ENTER" button.
DISABLE
BACK
ENTER
SETTINGS STATUS SERVICE
MODE
To exit this setting, press "BACK" button until Home
screen is displayed.
IKONIC Tankless Water Heater Service Manual
DISABLE
ENTER
BACK ENTER
MODE
SETTINGS STATUS SERVICE MODE