Wifi Setting / Wifi Setup - Rheem IKONIC RTGH-S11i Manual

USER INTERFACE AND OPTIONS
WIFI STATUS
3. Press the "▲" or "▼" button to navigate through the
menu items. The status menu items are below:
WIFI DEVICE STATUS
Status of WiFi
connections
WIFI SETUP
Re-start WiFi
provisioning
ECONET WIFI SW
Software version for
WiFi protocol
WIFI MODULE SW
Software version for the
WiFi chip
WIFI SETTING
WiFi Setup (At Initial Power Up) The display will prompt
WiFi set up at initial power up.
1. Press "ENTER" to continue WiFi setup or "BACK" to
exit setup and turn OFF WiFi signal broadcast.
ENTER
STATUS SERVICE MODE
SETTINGS
MAC ADDRESS:
WIFI SIGNAL
WiFi signal strength in
decibels (dBm)
SSID:
IP ADDRESS:
SUBNET MASK:
SGATE WAY:
Return to"WiFi
WiFi Setup?
Device Status"
BACK
SETTINGS
SET POINT
BACK
SETTINGS STATUS
WiFi Setup?
BACK ENTER
STATUS SERVICE MODE
WiFi Setup?
BACK
SETTINGS
21
2. To set up the WiFi connection, press "ENTER." The
3. Follow the prompts in the application to complete
NOTE: If user chooses to NOT to set up WiFi, initially,
press "BACK" button. WiFi signal will not be broadcast-
ed until user goes to additional steps.
WIFI SETUP (AFTER INITIAL
POWER UP)
1. Press the "STATUS" button.
ENTER
STATUS SERVICE MODE
2. Press the "▼" or "▲" button until "WiFi status" is dis-
ENTER
SERVICE MODE
BACK
SETTINGS
ENTER
STATUS SERVICE MODE
IKONIC Tankless Water Heater Service Manual
WiFi signal is broadcasted for 30 minutes and the
user should download and use the EcoNET Applica-
tion, available on Android and iPhone, to continue the
setup process.
set-up.
SET POINT
BACK
SETTINGS STATUS
played, and press "ENTER" button.
WiFi Status
BACK
SETTINGS STATUS
SET POINT
ENTER
STATUS SERVICE MODE
Yes
BACK
SETTINGS STATUS
ENTER
SERVICE MODE
ENTER
SERVICE MODE
WiFi Status
BACK
SETTINGS
ENTER
SERVICE MODE
ENT
STATUS SERVICE MO
S