Water Inlet Connection - Rheem IKONIC RTGH-S11i Manual

HOW TO REMOVE COMPONENTS

WATER INLET CONNECTION

NOTE: Before removing water inlet connection, turn off water to the water heater by closing the shut off valve and
drain the heater.
1. Remove 3 screws from the bottom plate, as pictured
below.
2. Remove a screw holding freeze protection heater
from water inlet connection, and pull the freeze pro-
tection heater.
71 IKONIC Tankless Water Heater Service Manual
3. Remove quick fastener connected to check valve.
NOTE: For non recirculation model, remove quick fas-
tener connected to water control valve.
Check Valve