Set up instructions for Bistro 10-Touch Machine
Fill and install ingredient hoppers with nozzles turned up, Chocolate on left and
Milk on right. Make sure "button" on bottom of hopper is seated in slot in sheet
metal. Slight manual rotation of the auger gear may be necessary to seat
hopper in correct location.
Rotate dispense nozzles down into whipper bowl.
Product Installation Procedure
Open product box and remove the BIB product. Place in
Coffee BIB Tray, Fig. 2, (Newco PN 121929) as shown in
Fig. 3.
Fig. 1
Fig. 2
9
Fig. 3