Machine Set Up; Machine Care - Newco Cafe Espresso 2.0 Manual

MACHINE SET UP

PLUMBING
Water inlet connection is located on the rear of the
machine.
This equipment must be installed to comply with the
Basic Plumbing Code of the Building Officials and Code
Administrators International, Inc. (BOCA) and the Food
Service Sanitation Manual of the Food and Drug
Administration (FDA). For models installed outside the
U.S.A., comply with the applicable Plumbing/ Sanitation
Code.
ELECTRICAL
WARNING: Read and follow installation instructions before plugging or wiring in machine to
electrical circuit. Warranty will be void if machine is connected to any voltage other than
that specified on the serial tag. Machine must be plugged into a grounded outlet.
Electrical connections must match specifications indicated on machine data plate.

MACHINE CARE

 Place machine with at least 2 inches between machine and any other appliance, and
at least 2 inches between wall and rear of machine. Do not place machine on the edge
of any surface.
 Never add water to the bean hopper.
 While drink is being made, do not open or remove any part of the machine.
 Do not use hot or iced water in the water tank.
 Do not turn off machine power while a cleaning cycle is being performed.
 Always use the power button on the shortcut menu (see page 9) to turn off machine
power. Machine will flush water, then power down. After machine has powered down,
flip the switch on the back of the machine to the off ("O") position.
 Do not use machine in temperatures below 50°F or above 104°F.
 Never use machine outdoors.
 Do not use frozen or specialty coffee beans (i.e., cocoa or sugar coated).
 If using this machine as a pour over, only used pure, filtered water.
 Espresso beans may need to be stirred in hopper on occasion, to prevent sticking due to
oiliness.
Follow the Installation Instructions on the next page. Manufacturer recommends modifying
programming settings upon installation. Explanation of all programming settings begins on
page 14.
CAFÉ ESPRESSO 2.0 PN 153335 20230322
1450W
Technical Service: 1-800-556-3926
7