11.25
Mounting the seat
11.26
Removing the air filter box cover
SERVICE WORK ON THE CHASSIS 11
–
Attach the seat to the collar bushings at the front and simul-
taneously push it back.
The holding lugs engage in the recesses at the back.
–
Make sure the seat is latched in place correctly.
A01225-10
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
A01193-10
Condition
The air filter box cover is secured.
–
Remove screw
A01226-10
–
Pull off the air filter box cover in area
ways and forward. Take off the air filter box cover.
A01227-10
1
.
M6
10 Nm (7.4 lbf ft)
1
.
A
and push it side-
67