10 TUNING THE CHASSIS
10.9
10.10
42
Checking the riding sag of the shock absorber
402417-10
Adjusting the spring preload of the shock absorber
Caution
Risk of injury Parts of the shock absorber will move around if the shock absorber is detached incor-
rectly.
The shock absorber is filled with highly compressed nitrogen.
–
Please follow the description provided. (Your authorized Husqvarna Motorcycles workshop will be
glad to help.)
Info
Note the current adjustment before changing the spring preload - e.g. measure the spring length.
–
A
Measure dimension
of rear wheel unloaded. (
–
With another person holding the motorcycle, the rider, wear-
ing full protective clothing, sits on the seat in a normal sitting
position (feet on footrests) and bounces up and down a few
times.
The rear wheel suspension levels out.
–
Another person again measures the distance between the
rear axle and marking SAG on the rear fender using the sag
gage.
–
Note the value as dimension
Info
The riding sag is the difference between measure-
A
C
ments
and
–
Check riding sag.
Riding sag (FC 450 EU)
Riding sag (FC 450 US)
Riding sag (FX 450)
»
If the riding sag differs from the specified measurement:
–
Adjust the riding sag.
Preparatory work
–
Remove the right side panel. (
–
Remove main silencer. (
–
Raise the motorcycle with a lift stand. (
–
Remove the shock absorber.
–
After removing the shock absorber, clean it thoroughly.
p. 40)
C
.
.
105 mm (4.13 in)
105 mm (4.13 in)
105 mm (4.13 in)
(
p. 43)
p. 55)
p. 71)
p. 51)
(
p. 63)