Adjusting The Compression Damping Of The Fork - Husqvarna FC 450 2023 Owner's Manual

10 TUNING THE CHASSIS
10.14
46

Adjusting the compression damping of the fork

Info
The hydraulic compression damping determines the fork suspension behavior.
A01167-10
Guideline
Air pressure (FC 450 EU)
Air pressure (FC 450 US)
Air pressure (FX 450)
Gradual changing of the air
pressure in steps of
Minimum air pressure
Maximum air pressure
Info
Never adjust the air pressure to a value outside the
stated range.
–
Disconnect the fork airpump from the left fork leg.
When disconnecting, excess pressure will escape from
the hose – the fork leg itself does not lose any air.
The fork airpump indicator switches off automatically
after 80 seconds.
–
Mount the protection cap.
Info
Only mount the protection cap by hand.
Finishing work
–
Remove the motorcycle from the lift stand. (
–
1
Turn adjuster clockwise all the way to the stop.
Info
1
Adjuster is located at the upper end of the right
fork leg.
–
Turn counterclockwise by the number of clicks correspond-
ing to the fork type.
10.4 bar (151 psi)
10.7 bar (155 psi)
10.1 bar (146 psi)
0.2 bar (3 psi)
7 bar (102 psi)
12 bar (174 psi)
p. 51)