Changing The Engine Oil And Oil Filter, Cleaning The Oil Screens - Husqvarna FC 450 2023 Owner's Manual

17.3

Changing the engine oil and oil filter, cleaning the oil screens

Warning
Danger of scalding Engine and gear oil get very hot when the motorcycle is ridden.
–
Wear suitable protective clothing and safety gloves.
–
In the event of scalding, rinse the area affected immediately with lukewarm water.
Note
Environmental hazard Hazardous substances cause environmental damage.
–
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance
with the applicable regulations.
Info
Drain the engine oil while the engine is at operating temperature.
SERVICE WORK ON THE ENGINE 17
Preparatory work
–
Park the motorcycle on a level surface.
(FX 450)
–
Remove the engine guard. (
Main work
–
Position an appropriate container under the engine.
–
Remove oil drain plug
F03774-10
–
Remove screw plug
Info
Do not remove screw
F03775-10
–
Remove screw plug
rings.
–
Allow the engine oil to drain completely.
–
Thoroughly clean the parts and the sealing surfaces.
H05063-10
p. 54)
1
with the magnet and seal ring.
2
with the O-ring.
A
.
3 4
with long oil screen and the O-
123