15 COOLING SYSTEM
15.5
112
Warning
Danger of poisoning Coolant is harmful to health.
–
Keep coolant out of the reach of children.
–
Do not allow coolant to come into contact with the skin, the eyes and clothing.
–
Consult a doctor immediately if coolant is swallowed.
–
Rinse the affected area immediately with plenty of water in the event of contact with the skin.
–
Rinse eyes thoroughly with water and consult a doctor immediately if coolant gets into the eyes.
–
Change clothing if coolant spills onto your clothing.
A01231-10
Refilling with coolant
Warning
Danger of poisoning Coolant is harmful to health.
–
Keep coolant out of the reach of children.
–
Do not allow coolant to come into contact with the skin, the eyes and clothing.
–
Consult a doctor immediately if coolant is swallowed.
–
Rinse the affected area immediately with plenty of water in the event of contact with the skin.
–
Rinse eyes thoroughly with water and consult a doctor immediately if coolant gets into the eyes.
–
Change clothing if coolant spills onto your clothing.
A01232-10
Condition
The engine is cold.
Preparatory work
(FX 450)
–
Remove the engine guard. (
Main work
–
Position the motorcycle upright.
–
Place an appropriate container under the water pump cover.
–
1
Remove screw
. Take off radiator cap
–
Completely drain the coolant.
–
Mount and tighten screw
Guideline
Screw, water pump
cover
Main work
–
1
Make sure that screw
–
Position the motorcycle upright.
–
Pour coolant in up to measurement
fins.
Guideline
A
Distance
above the radi-
ator fins
Coolant
–
Mount the radiator cap.
–
Go for a short test ride.
–
Check the coolant level. (
p. 54)
2
.
1
with a new seal ring.
M6
10 Nm (7.4 lbf ft)
is tightened.
A
above the radiator
10 mm (0.39 in)
0.95 l (1 qt.)
Coolant (
p. 111)
p. 146)