Transporting - Stihl MS 500i W Instruction Manual

4 Safety Precautions
￭ If kickback occurs, the saw can be thrown up in the
direction of the operator. The operator can lose control of
the saw and be seriously or fatally injured.
► Hold the saw firmly with both hands.
► Always keep your body out of the plane of the cutting
attachment.
► Use the working techniques described in this instruction
manual.
► Do not cut with the upper quadrant of the bar nose.
► Always cut with a properly sharpened and tensioned
saw chain.
► Use a reduced kickback saw chain.
► Use a guide bar with a narrow radius nose.
► Always cut with the chain running at full speed.
4.9.2 Pull-in
The saw is pulled away from the operator when the bottom
of the bar is used for cutting.
WARNING
￭ If the rotating chain makes contact with a hard object and
is suddenly pinched, the saw is abruptly jerked away from
the operator. The operator can lose control of the saw and
be seriously or fatally injured.
► Hold the saw firmly with both hands.
► Operate the saw as described in this instruction manual.
0458-809-0121-A
► Keep the guide bar straight in the cut.
► Apply the spiked bumper properly.
► Always cut with the chain running at full speed.
4.9.3 Pushback
The saw is pushed back toward the operator when the top of
the bar is used for cutting.
WARNING
￭ If the rotating chain makes contact with a hard object and
is suddenly pinched, the saw can be abruptly pushed back
toward the operator. The operator can lose control of the
saw and be seriously or fatally injured.
► Hold the saw firmly with both hands.
► Operate the saw as described in this instruction manual.
► Keep the guide bar straight in the cut.
► Always cut with the chain running at full speed.

4.10 Transporting

WARNING
￭ The saw may turn over or shift during transport. This can
result in serious injuries and damage to property.
► Shut off the engine.
► Engage the chain brake.
English
13