Work Area And Surroundings; Safe Condition - Stihl MS 500i W Instruction Manual

4 Safety Precautions
► Wear a long-sleeved, snug-fitting upper garment.
￭ Noise occurs during operation. Noise can harm your
hearing.
► Wear hearing protection.
￭ Falling objects can cause head injuries.
► If there is a danger of falling objects during
operation: Wear a safety hard hat.
￭ Dust can be whipped up during operation: Whipped up
dust can damage the respiratory passages and cause
allergic reactions.
► If dust is whipped up and forms a cloud: Wear a dust
respirator mask.
￭ Inappropriate clothing can snag on wood, brush or the
saw. Not wearing personal protective equipment may
result in serious injury.
► Wear snug-fitting clothing.
► Do not wear a scarf or jewelry.
￭ The user can come into contact with the rotating saw
chain during operation. This can result in serious injuries.
► Wear long trousers with cut-retardant inserts.
￭ The user can be cut by the wood during operation. The
user can come into contact with the saw chain during
cleaning and maintenance work. This can result in
personal injury.
► Wear work gloves made of durable material.
￭ Wearing unsuitable footwear may cause you to slip or
stumble. Contact with the rotating saw chain can result in
cuts. This can result in personal injury.
► Wear chainsaw boots with cut retardant inserts.
0458-809-0121-A
4.5

Work Area and Surroundings

WARNING
￭ Bystanders, children and animals are not aware of the
dangers of the chainsaw or thrown objects. Innocent
bystanders, children and animals may be seriously injured
and damage to property may occur.
► Keep bystanders, children and animals away from the
work area.
► Do not leave the chainsaw unattended.
► Make sure that children cannot play with the chainsaw.
￭ Hot exhaust gas is emitted through the muffler while the
engine is running. Hot exhaust gas can ignite easily
flammable materials and cause a fire.
► Keep exhaust gas well away from easily flammable
materials.
4.6

Safe Condition

4.6.1 Chainsaw
The chainsaw is in a safe condition if the following points are
observed:
– The saw is not damaged.
– There is no fuel leaking from the chainsaw.
– The fuel tank and oil tank caps are closed.
– The saw is clean.
– Chain catcher is fitted and undamaged.
– Chain brake is operating properly.
– The controls function properly and have not been
modified.
– Chain lubrication is operating properly.
– Wear marks on chain sprocket are not deeper than 0.5
mm.
– A combination of guide bar and saw chain recommended
in this instruction manual is mounted.
– The guide bar and chain are properly mounted.
English
7