Working - Stihl MS 500i W Instruction Manual

English
4.8

Working

4.8.1 Cutting
WARNING
￭ Always work within calling distance of others in case help
is needed.
► Make sure than persons outside the work area are
within calling distance.
￭ If the engine is not started properly, the user may lose
control of the chainsaw. This can result in serious injuries.
► Start the engine as described in this instruction manual.
► If the saw chain is touching the ground or objects: Do
not start the engine.
￭ The user cannot concentrate on the work in certain
situations. The user can lose control of the saw, stumble
or fall and be seriously injured.
► Work calmly and carefully.
► If light and visibility are poor: Do not use your saw.
► Operate the chainsaw alone.
► Do not work above shoulder height.
► Watch out for obstacles.
► Stand on the ground while working and keep a good
balance. If it is necessary to work at heights: Use a lift
bucket or a safe platform.
► If you begin to feel tired: Take a break.
￭ Exhaust gas is produced when the engine is running.
Breathing in exhaust gas can have toxic effects.
► Avoid inhaling exhaust gas.
► Operate the chainsaw is a well ventilated location.
► In the event of nausea, headache, visual disturbances,
problems with hearing or dizziness: Stop work and seek
medical advice.
10
￭ The user's ability to hear and assess noises is restricted
when wearing hearing protection with the engine running.
► Work calmly and carefully.
￭ Do not accelerate the engine with the chain brake
engaged since this can damage the chain brake.
► Disengage the chain brake before you start cutting.
￭ The rotating saw chain can cut the operator. This can
result in serious injuries.
► Do not touch the rotating saw chain.
► If the saw chain is blocked by an object: Shut off the
engine and engage the chain brake. Then remove the
object causing the blockage.
￭ The rotating chain becomes hot and expands. If the chain
is not lubricated sufficiently and re-tensioned at regular
intervals, it man come off the guide bar or break. This can
result in serious injuries and damage to property.
► Use special chain oil.
► Check chain tension regularly during cutting work. If
chain tension is insufficient: Tension the chain.
￭ If the behavior of the saw changes during operation or
feels unusual, it may no longer be in a safe condition. This
can result in serious injuries and damage to property.
► Stop work and contact your STIHL dealer for
assistance.
￭ Saw vibrations may occur during operation.
► Wear gloves.
► Take regular breaks.
► If signs of circulation problems occur: Seek medical
advice.
4 Safety Precautions
0458-809-0121-A