Cutting Unit Maintenance
Blade Safety
Use care when checking the reel cutting-unit. Wear
gloves and use caution when servicing the reel.
A worn or damaged blade or bedknife can break, and
a piece could be thrown toward you or bystanders,
resulting in serious personal injury or death.
•
Inspect the blades and bedknives periodically for
excessive wear or damage.
•
Use care when checking the blades. Wear gloves
and use caution when servicing them. Only
replace or backlap the blades and bedknives;
never straighten or weld them.
Installing the Cutting Unit
1.
Move the kickstand to the C
position; refer to
2.
Align the cutting unit to the frame.
3.
Move the suspension latches down to secure
the cutting unit to the machine
-U
-S
UTTING
NIT
Kickstand (page
11).
(Figure
37).
ERVICE
1. Latches
2. Collar
4.
Move the collar out of the
transmission-coupler-shaft groove and insert
the hex tube into the cutting-unit coupler shaft
(Figure
5.
Install the grass basket.
30
Figure 37
3. Hex tube
4. Coupler shaft
37).
g307906