Table of Contents
Advertisement
Telephone operation
Temporary tone dialing
The dial mode is preset to tone. If you do not
have touch-tone service, you need to change the
setting to pulse (page 1 and 19).
If you have pulse (rotary) service, you can
change from pulse to tone dialing during a call
by pressing
TONE
base. This is useful if you need to send touch-
tone signals to access telephone banking or long
distance services.
Once you have initiated your call by dialing the
phone number in pulse (rotary), press
on the handset or telephone base. Now, all
subsequent key presses will be sent as touch-
tone signals.
After you hang up the call, the phone returns to pulse (rotary) dialing for the
next call.
Handset locator
This feature helps you find a misplaced handset.
To start paging:
Press the MENU softkey when the telephone base is
1.
not in use.
/
2.
Press
or
CID
press the SELECT softkey on the telephone base.
The telephone base shows Paging all handsets and
the handset shows **Paging**.
To end paging:
Press the STOP softkey on the telephone base.
•
-OR-
Press OFF,
•
dialing keys (0-9, #,
on the handset or telephone
/
to select Page all HS, then
DIR
, INT,
/
,
,
) on the handset.
TONE
TONE
/
, REDIAL/
,
CID
DIR
33
Call log
Page all HS
Intercom
, HOLD or any
PAUSE
SELECT
Advertisement
Table of Contents
