VTech DS6311 Quick Start Manual

Bluetooth quick start guide
for models DS6311/DS6321/DS6322

Bluetooth setup

To use a Bluetooth enabled cell phone or headset with
your DS6311/6321/6322, you must first pair and connect
your Bluetooth device(s) with the telephone base. All
DS6311/6321/6322 handsets can be used to make or
answer calls on the cell phone line.
Bluetooth wireless technology operates within a short range
(a maximum of approximately 30 feet). When you pair a
Bluetooth cell phone or Bluetooth headset to the telephone
base, make sure your Bluetooth device is close to the
telephone base to maintain sufficient signal strength.
Keep your Bluetooth device close
to the telephone base to maintain a
reliable connection.
• Refer to your user's manual for complete feature instructions.
• The pairing process may take up to one minute. If the pairing
process fails, try again.
• If you put the handset back in the telephone base or charger
while pairing, the process stops and the handset returns to
idle mode.
Pair your first Bluetooth cell phone
i
Before you begin, make sure you have cellular
coverage and your Bluetooth enabled cell phone
is not connected to any other Bluetooth device.
To pair and connect your first Bluetooth cell phone:
1. Press .
2. Press to highlight
3. Press then press to highlight
4. Press . The screen displays
5. Press . The screen displays
6. Press to set the telephone base
to discoverable mode.
Then, promptly turn on the Bluetooth
feature of your cell phone and search
for or add new devices.
7. Once your cell phone finds your VTech phone, press
the appropriate key on your cell phone to continue the
pairing process.
8. Enter the PIN of the telephone base (the default PIN is
0000) into your cell phone .
9. When successfully connected, the handset displays
Paired with
Cel lular
The corresponding device light (DEVICE1 or DEVICE2)
on the telephone base turns on.
Ans. system
If you have trouble pairing your cell phone, it may not
Directory
be compatible with your DS6311/6321/6322. Check the
Cal l log
Bluetooth compatibility list at www.vtechphones.com.
Intercom
Bluetooth
• The steps for the pairing process may vary for different cell
phones. If this happens, follow the prompts on your cell phone
and your DS6311/6321/6322 to complete the pairing process.
• Refer to the user's manual of your cell phone on how to search
for or add a new Bluetooth device.
BLUETOOTH
Download dir Pair your first Bluetooth headset
Add cel lular
Add headset
i Before you begin, make sure your Bluetooth
Active devices
enabled headset is not connected to any other
Bluetooth device.
Bluetooth headsets can only be used for calls on the
ADD CELLULAR
home line.
Place cel l
phone next to
To pair and connect your first Bluetooth headset:
base.
Press SELECT
1. Press
Please set your
cel l phone to
search for
2. Press
devices, then
press SELECT
3. Press
Base name:
VTech DS6321
PIN:0000
4. Press
Cel lular setup
1
completed
HANDSET X
g
g
Device
connected
12:30pm
.
Ans. system
to highlight
Directory
Cal l log
Intercom
Bluetooth
then press to highlight
BLUETOOTH
Download dir
Add cel lular
Add headset
Active devices
ADD HEADSET
Place Bluetooth
. The screen displays
headset next to
base.
Press SELECT
12/25