Table of Contents
Advertisement
Answering system settings
Answering system set up
For each telephone line, you can change the settings of the answering system
using your handset or telephone base.
Answer ON/OFF
You must turn on the answering system for answering and recording
messages.
To turn the answering system on or off :
Using the telephone base:
Press /ON/OFF LINE 1 and/or /ON/OFF LINE 2 to turn on the
1.
corresponding answering system. The telephone base announces and
shows, "Calls will be answered." The /ON/OFF LINE 1 light and/or
/ON/OFF LINE 2 light will be on respectively.
Press /ON/OFF LINE 1 and/or /ON/OFF LINE 2 to turn off the
2.
corresponding answering system. The telephone base announces and
shows, "Calls will not be answered." The /ON/OFF LINE 1 light and/or
/ON/OFF LINE 2 light will be off respectively.
Using the handset:
Press the MENU softkey when the handset is not
1.
in use.
2.
Press the SELECT softkey to select ANSWERING SYS.
3.
Press
or
press the SELECT softkey. The corresponding icon,
1
or
2,
.
Press
or
SELECT softkey.
Press the SELECT softkey to select Answer ON/OFF.
5.
6.
Press
or
SET softkey to confirm your setting or press the
BACK softkey to exit to the previous menu without
making any changes.
7.
The screen displays
system of line 1 or line 2 is turned on respectively. The
screen displays
both lines 1 and 2 are turned on.
to select Mailbox 1 or Mailbox 2, then
flashes on the screen.
to select Ans sys setup, then press the
to select On or Off, then press the
n
n
or
A
1
A
S
S
ON2
ON
n
when the answering systems of
A
S1
ON
2
when the answering
21
ANSWERING SYS
BACK
SELECT
ANSWERING SYS
Mailbox 1
Mailbox 2
BACK
SELECT
1
ANSWERING SYS
Delete all old
Record memo
Ans sys setup
BACK
SELECT
1
ANS SYS SETUP
Answer ON/OFF
Call screening
Announcement
BACK
SELECT
1
ANSWER ON/OFF
On
Off
BACK
SET
Advertisement
Table of Contents
