NordicTrack RW 600 User Manual page 10

8. Press the Wire Protector (79) around the console
wires (A) in the location shown.
While a second person holds the Console (75)
near the Console Bracket (108), connect the
connectors on the console wires (A) to the con-
nectors on the Neck Wire (112). Next, insert the
connectors into the Neck (76), and then press
the Wire Protector (79) into the Neck. Tip: It
may be helpful to insert the connectors one
at a time into the Neck.
Tip: Avoid pinching the wires. If necessary,
tilt the Neck (76) upward to make this
step easier. Attach the Console (75) to the
Console Bracket (108) with four M4 x 16mm
Screws (68); start all the Screws, and then
tighten them.
9. Plug the Power Adapter (107) into the receptacle
on the front of the rower.
Note: To plug the Power Adapter (107) into an
outlet, see HOW TO PLUG IN THE POWER
ADAPTER on page 11.
To register your product and activate your
warranty today, go to my.nordictrack.com.
10. Make sure that all parts are properly tightened before you use the rower. Extra parts may be included.
Place a mat under the rower to protect the floor.
8
75
Avoid
79
pinching
the wires
9
10
108
68
112
76
A
68
107