Bosch B8512G Operation Manual page 98

98
en | B94x/B93x Users menu
Configuring a RADION keyfob or an Inovonics Transmitter for the user:
1. Press Keyfob to assign a RADION keyfob or an Inovonics
Transmitter to the user.
2. To remove a previously added keyfob or transmitter, press Remove.
3. To replace a previously added keyfob or transmitter, press Replace
and then Replace, and follow the next step.
4. On a RADION keyfob, press any button. On an Inovonics
Transmitter, open the transmitter and press the RESET button, per
the manufacturer's instructions. The keypad shows Keyfob enrolled.
5. To add a RADION keyfob or an Inovonics Transmitter, press Add to
continue, and follow the previous step.
6. To manually enter the RFID, if desired, press Enter RFID to add the
RFID. Otherwise, the keypad automatically learns the RFID into the
security system when you add a RADION keyfob or an Inovonics
Transmitter.
7. Press ENTER to continue.
8. Enter the RFID.
9. Press Save to save the RFID and return to the previous menu.
Adding or replacing a card for the user:
1. Press Card.
2. Press ENTER to continue.
3. Present the card at the card reader. The keypad shows Present
card.
4. If the reader identifies the card correctly, the keypad shows Card
configured.
5. Escape from the menu.
Selecting a keypad display language for the user:
1. Press Language to select the user's language.
2019.06 | 07 | F.01U.307.371
Control Panels
Bosch Security Systems B.V.