Bosch B8512G Operation Manual page 153

Control Panels
Notice!
Fire walk test includes gas
When you perform a Fire walk test, the security system
tests any 24-hour points that are not invisible, including gas
points.
Performing a walk test:
1. Open the Main Menu.
2. Use NEXT to go to the Actions menu option, and press ENTER, or
simply press [3].
3. Use NEXT to go to the Test menu option, and press ENTER, or
simply press [3].
4. Press [1] or ENTER to open the Walk Test menu.
5. Enter your passcode and press ENTER.
6. Use NEXT to go to the desired walk test, and press ENTER, or
simply press the number key for the desired walk test: [1] for Fire,
[2] for Intrusion, [3] for Service, or [4] for Invisible.
7. Press ENTER to view the points.
8. Use NEXT to toggle through your desired point and view the status
of that point.
9. Press ESC to exit the menu.
Automatic termination
The Walk Test automatically ends after 20 minutes of no test activity.
The keypad sounds during the last 5 minutes of the test.
Bosch Security Systems B.V.
B92x/B91x Actions menu | en
2019.06 | 07 | F.01U.307.371
153