Bosch B8512G Operation Manual page 135

Control Panels
24.1.1 All On
Turning an area All On turns on all points in the area and provides entry
and exit delay. For example, you can turn on the area and leave through
a door (within exit delay time) without creating an alarm event. When
you turn the area All On, the display shows how many seconds of exit
delay time remain to exit the protected area. Leave before the exit delay
time expires.
Leaving after exit delay expires causes entry delay to start. It may also
cause an alarm on an interior device. Enter your passcode to turn off
the system.
Turning areas All On:
1. Open the Main Menu.
2. Press [1] or ENTER to open the On/Off menu.
3. Press [1] or ENTER to open the All On menu.
4. Press [1] or ENTER to select All On Delay.
5. Enter your passcode and press ENTER. The keypad shows Exit
Now! and sounds during the exit delay.
6. Exit the area or enter your passcode to stop the system from
turning on. If you turn your system All On and don't exit, the system
automatically switches to Part On.
Bosch Security Systems B.V.
B92x/B91x On/Off menu | en
2019.06 | 07 | F.01U.307.371
135