Bosch B8512G Operation Manual page 72

72
en | B94x/B93x Actions menu
16.3.2 Send Test Report
This function tests the communication link between your security
system and your security company. It is an important part of
maintaining a high level of security for your property.
You can either send a normal test report or a custom test report:
– Normal test report: Includes all route groups that have the test
report function enabled, independent of which destination device is
used to communicate. The test report is sent to the first successful
destination device in a route group.
– Custom test report: You can select the route group and destination
device you want to test. You can either test one destination device
per route group or all configured destination devices for a route
group.
Sending a normal test report:
1. Open the Main Menu.
2. Press Actions to open the menu.
3. Press Test to open the menu.
4. Press Test Report to open the menu.
5. Press Normal Test.
6. Enter your passcode and press ENTER.
The system sends a normal test report.
7. Escape from the menu.
Sending a custom test report:
1. Open the Main Menu.
2. Press Actions to open the menu.
3. Press Test to open the menu.
4. Press Test Report to open the menu.
5. Press Custom Test.
6. Select the route group you want to test.
2019.06 | 07 | F.01U.307.371
Control Panels
Bosch Security Systems B.V.