Section 6 − Operation; Controls - Hobart Stickmate 160i Owner's Manual

6-1. Controls

A. Stickmate 160i
.
A complete Parts List is available at www.HobartWelders.com
SECTION 6 − OPERATION
1
1 Amperage Adjustment Control
Use control to select desired weld
amperage.
2 Power Indicator Light
Lamp goes on when unit is on.
3 Over Temperature Light
Light goes on when unit has
stopped due to overheating (see
Section 4-4). Light goes off and
weld output returns when unit has
cooled.
4 Power Switch
Use switch to turn unit on and off.
2
3
4
279230 / 276288
OM-278400 Page 21