Table of Contents
Advertisement
To use the timer:
1. While diving, press upper button to start the timer.
2. Press again the upper button to pause the timer.
3. Keep the upper button pressed to reset the timer.
Timer start and stop actions are saved to the dive log.
3.34 Water contacts
The water contact is located on the side of the case near the USB
cable port. When submerged, the water contact poles are
connected by the conductivity of the water. Suunto EON Steel
switches to dive state when water is detected and the depth gauge
senses water pressure at 1.2 m (4 ft).
74
Advertisement
Table of Contents
