Safety Stops And Deepstops - Suunto EON STEEL 1.4 User Manual

Table of Contents

Advertisement

To change to a bailout gas:
1. Keep the middle button pressed to enter main menu.
2. Scroll to OC gases and select with middle button.
3. Scroll to the desired bailout gas and select with the middle
button.
After a bailout gas is selected, the setpoint field is replaced with the
pO 2 value of the selected open-circuit gas.
If the malfunction is rectified or the dive situation otherwise
normalizes, you can switch back to a diluent using the same
procedure as below, but selecting from CC gases.

3.26 Safety stops and deepstops

A three (3) minute safety stop is always recommended for every
dive over 10 meters (19.7 ft).
The time for a safety stop is calculated when you are between 2.4
and 6 m (7.9 and 19.7 ft). This is presented with up/down arrows in
front of the stop depth. The safety stop time is shown in minutes
and seconds. The time may exceed three (3) minutes if you ascend
too fast during dive.
60

Advertisement

Table of Contents
loading

Table of Contents