Table of Contents
Advertisement
WARNING: When diving with multiple gases, remember that the
ascent time is always calculated with the assumption that you use
all the gases found in the Gas(es) menu. Always check that you have
only the gases for your current planned dive defined before you
dive. Remove the gases that are not available for the dive.
3.22.1 Modifying gases during a dive
Modifying gases is for emergency cases only. For example, due to
unforeseen events, a diver might lose a gas mixture, in which case
the diver could adjust to the situation by deleting that gas mixture
from gas list Suunto EON Steel. This allows the diver to continue to
dive and get correct decompression information calculated the dive
computer.
In another case, if for some reason a diver runs out of gas and
needs to use a gas mixture from a dive buddy, it is possible to adapt
Suunto EON Steel to the situation by adding the new gas mixture to
the list. Suunto EON Steel re-calculates decompression and shows
the correct information for the diver.
50
Advertisement
Table of Contents
