Table of Contents
Advertisement
The correct oxygen and helium percentages of the diluent gas(es) in
your diluent cylinder(s) must always be entered into the dive
computer (or through DM5) to ensure correct tissue and oxygen
calculation. Diluent gas(es) used on a rebreather dive are found
under CC gases in the main menu.
3.25.2 Open-circuit gases
As with diluents, you must alway define the correct oxygen and
helium percentages of bailout gas(es) for all your cylinders (and
additional gases) to ensure correct tissue and oxygen calculation.
Bailout gases for a rebreather dive are defined under OC gases in
the main menu.
3.25.3 Setpoints
CCR mode has two setpoint values, low and high. Both are
configurable:
Low setpoint: 0.4 – 0.9 (default: 0.7)
•
High setpoint: 1.0 – 1.6 (default: 1.3)
•
Typically you do not need to modify the default setpoint values.
However, you can change them as needed either in DM5 or under
the main menu.
To change setpoint values in Suunto EON Steel:
1. While in surface state, keep middle button pressed to enter main
menu.
2. Scroll to Setpoint with the upper button and select with the
middle button.
57
Advertisement
Table of Contents
