Suunto EON STEEL 1.4 User Manual page 42

custom dive mode views in DM5. In the classic view below, gas
consumption rate is in the lower right-hand corner.
To enable gas consumption
1. Add the gas consumption filed to your custom dive mode in
DM5. See
2. Install and pair a Suunto Tank POD. See
3. After you have selected the correct gas and returned to the main
time view, keep the middle button pressed to enter menu.
4. Scroll to Gases with the lower button and select with the middle
button.
5. Scroll to the gas you just selected from your Tank POD and select
with the middle button.
6. Scroll to Tank size and select with the middle button.
7. Check the tank size and change the size with the upper or lower
button as needed. Confirm change with the middle button.
8. Keep the middle button pressed to exit the menu.
NOTE: For accurate gas consumption, you must define the tank
size. Not defining the tank size leads to incorrect gas consumption
readings.
42
3.9 Customization .
3.32 Tank pressure .