Table of Contents
Advertisement
Suunto D5
TIP: Remove pressure from the Tank POD when not diving to save battery life.
3.29. Timer
Suunto D5 has a timer that can be used for timing specific actions during surface or dive. The
timer is shown in bottom-right corner as scrollable item.
NOTE: The timer can also be customized to be as an analog watch in the center of the
display.
To use the timer:
1. While diving, press upper button to start the timer.
2. Press again the upper button to pause the timer.
3. Keep the upper button pressed to reset the timer.
Timer start and stop actions are saved to the dive log.
3.30. Water Contacts
When submerged, the water contact poles are connected by the conductivity of the water.
Suunto D5 switches to dive state when water is detected and the depth gauge senses water
pressure at 1.2 m (4 ft).
31
Advertisement
Table of Contents
