Table of Contents
Advertisement
6-6
Power Supply
The system includes a dual 1600 Watt power supply, which is auto-switching
capable. The power supply automatically senses and operates at a 100v to 240v
input voltage. Note that different input voltages will result in different maximum
power output levels.
In the event of a power supply failure, the remaining power supply will automatically
take over. The failed power module can be replaced without powering-down the
system. See Figure 6-18.
Replacing the Power Supply
1. Push the release tab on the front of the failed power supply.
2. Grasp the handle of the power supply and pull it out of the power supply bay.
3. Push the new power supply module into the power bay until it clicks into the
locked position.
1
2
Figure 6-18. Removing the Power Supply
1
1
Chapter 6: Advanced Chassis Setup
6-15
Advertisement
Table of Contents
