Table of Contents
Advertisement
S
S
UPER
ERVER 2027GR-TR2/TRT2/TRH2/TRHT2 User's Manual
Note: For your system to work properly, please follow the links below to download
all necessary drivers/utilities and the user's manual for your server.
•
Supermicro product manuals:
•
Product drivers and utilities:
•
Product safety info:
•
If you have any questions, please contact our support team at:
support@supermicro.com
1-2
Serverboard Features
At the heart of the SuperServer 2027GR-TR2/TRT2/TRH2/TRHT2 server is the
X9DRG-HF+II/X9DRG-HTF+II , a dual processor serverboard based on the Intel
C602 chipset. Below are the main features of the X9DRG-HF+II/X9DRG-HTF+II .
(See Figure 1-1 for a block diagram of the chipset).
Processors
The X9DRG-HF+II/X9DRG-HTF+II supports two Intel E5-2600 series processors in
LGA 2011 sockets (Socket R). Please refer to the serverboard description pages on
our web site for a complete listing of supported processors (www.supermicro.com).
Memory
The X9DRG-HF+II/X9DRG-HTF+II has 16 DIMM slots that can support up to 1 TB
of ECC LRDIMMs, 512 GB of ECC RDIMMs or 128 GB of ECC/non-ECC UDIMMs
in 16 DIMM slots (DDR3-1866/1600/1333/1066/800 MHz). Modules of the same
size and speed are recommended. See Chapter 5 for details.
Serial ATA
The serverboard supports a 10-port SATA subsystem, which is RAID 0, 1, 5 and
10 supported. Two of these are SATA 3.0 ports and eight are SATA 2.0 ports. The
SATA drives are hot-swappable units.
PCI Expansion Slots
The X9DRG-HF+II/X9DRG-HTF+II has four PCI-Express 3.0 x16 slots to support
four double-width GPU cards. Additional slots support one PCI-Express 3.0 x8 (in
x16 slot) and one PCI-Express 2.0 x4 (in x8 slot). Note that both CPUs must be
installed for full use of the PCI-E slots.
http://www.supermicro.com/support/manuals/
ftp://ftp.supermicro.com
http://super-dev/about/policies/safety_information.cfm
1-2
Advertisement
Table of Contents
