Supero SUPERSERVER 2027GR-TR2 User Manual page 119

Chapter 7: BIOS
When SEL is Full
This feature allows the user to decide what the BIOS should do when the system
event log is full. Select Erase Immediately to erase all events in the log when the
system event log is full. The options are Do Nothing and Erase Immediately.
Note: After making changes on a setting, be sure to reboot the system for the
changes to take effect.

BMC Network Confi guration
LAN Channel 1: This feature allows the user to confi gure the settings for LAN1 Port.
IPMI LAN Selection
This feature allows the user to confi gure the IPMI LAN setting. The default setting
is Failover.
IPMI Network Link Status
This feature displays the status of IPMI Network Link connections. The default
setting is Dedicated LAN.
Update IPMI LAN Confi guration
This feature allows the user to decide if the BIOS should confi gure the IPMI setting
at next system boot. The options are No and Yes. If the option is set to Yes, the
user is allow to confi gure the IPMI settings at next system boot:
Confi guration Address Source
This feature allows the user to select the source of the IP address for this computer.
If Static is selected, you will need to know the IP address of this computer and enter
it to the system manually in the fi eld. If DHCP is selected, the BIOS will search for
a DHCP (Dynamic Host Confi guration Protocol) server in the network that is at-
tached to and request the next available IP address for this computer. The options
are DHCP and Static. The following items are assigned IP addresses automatically
if DHCP is selected, or can be confi gured manually if Static is selected.
Station IP Address
This item displays the Station IP address for this computer. This should be in decimal
and in dotted quad form (i.e., 192.168.10.253).
Subnet Mask
This item displays the sub-network that this computer belongs to. The value of each
three-digit number separated by dots should not exceed 255.
7-27