Supero SUPERSERVER 2027GR-TR2 User Manual page 110

S S
UPER ERVER 2027GR-TR2/TRT2/TRH2/TRHT2 User's Manual
VGA Priority
This feature allows the user to select the graphics adapter to be used as the primary
boot device. The options are Onboard, and Offboard.
Network Stack
Select Enabled enable PXE (Preboot Execution Environment) or UEFI (Unifi ed
Extensible Firmware Interface) for network stack support. The options are Enabled
and Disabled.
Super IO Confi guration
Super IO Chip: This item displays the Super IO chip used in the motherboard.
Serial Port 1 Confi guration/Serial Port 2 Confi guration
Serial Port
Select Enabled to enable a serial port specifi ed by the user. The options are En-
abled and Disabled.
Device Settings
This item displays the settings of a serial port specifi ed by the user.
Change Settings
Use this feature to set the optimal Platform Environment Control Interface (PECI)
setting for a serial port specifi ed. The default setting is Auto, which will allow the
AMI BIOS to automatically select the best PECI setting.
Device Mode
Use this feature to select the desired mode for a serial port specifi ed. The options
are Normal and High Speed.
Serial Port Console Redirection
COM 1/SOL
These two submenus allow the user to confi gure the following Console Redirection
settings for a COM Port specifi ed by the user.
Console Redirection
Select Enabled to use a COM Port selected by the user for Console Redirection.
The options are Enabled and Disabled. The default setting for COM1 is Disabled,
and for SOL is Enabled.
7-18