Software Updates - Elation KL PANEL PO User Manual

S O F T WA R E U P D AT E S
ONLY QUALIFIED TECHNICIANS SHOULD PERFORM THIS FUNCTION!
NOTE ALL MENU SETTINGS BEFORE UPDATING SOFTWARE!
FIXTURE SOFTWARE CAN NOT BE DOWNGRADED!
DOWNLOAD FIXTURE SOFTWARE TO PC ONLY! (NO MAC SUPPORT)
PLEASE CONTACT ELATION SERVICE FOR FURTHER INFORMATION.
PERSONALITY – Service Setting – USB Update
To update the fixture software via the UPDATE/SERVICE PORT, follow steps below.
1. Copy fixture software update file from a PC computer to a compatible USB flash drive.
Make sure only the fixture software update file is stored on the USB flash drive.
2. Disconnect DMX, Art-Net, and E-FLY connections and power the fixture ON.
3. Insert USB flash drive into the UPDATE/SERVICE PORT on the rear connection panel.
4. Navigate to the Personality > Service, then input the service passcode. Select the Update
Software option.
5. Select the software file name on the menu display and press ENTER.
6. Select YES to begin update process. Updating...% will show on the menu display.
7. After file is uploaded, the fixture will check the software, which may take some time.
8. The fixture will perform a reset process when the software update process is complete.
9. Remove the USB flash drive and make necessary system menu setting adjustments.
C-LOADER II
Alternately, an Elation C-Loader II can be used to update the fixture to the latest software.
Please visit the C-Loader II product page at the Elation web site and download the product
manual for step by step instructions.
https://www.elationlighting.com/c-loader-software-uploader
To order the C-Loader II uploader and the updated software for your fixture, please contact
Elation support for details.
36