Elation KL PANEL PO User Manual page 16

A C C E S S O R Y I N S TA L L AT I O N
JUNIOR PIN
1. Loosen the yoke adjustment knobs and adjust the mounting yoke to a position that allows
access to both the top and bottom sides of the yoke. Re-tighten the yoke adjustment
knobs to lock the yoke in position.
2. Locate the notched face of the junior pin and hold it against the clamp mounting point
located on the top side of the yoke. The notched surface of the junior pin must sit flush
against the matching groove on the surface of the clamp mounting point.
16