Receiving Failing Or Poor Grades - Omron MICROSCAN LVS 95 Series Frequently Asked Questions Manual

Q14. How can I send a barcode to Omron
Microscan for analysis when the barcode is

receiving failing or poor grades?

Note: The below procedure does not apply to DPM (direct part mark)
application standards, including ISO/IEC TR 29158, MIL STD 130N, and GS1
Table 7.
Place your barcode on the system window (grading is not required).
1. Click the "Archive" tab and select "Export image to file."
2. Save the image as a .bmp.
3. If you have purchased remote training from Omron Microscan then a report
defining the issues of the barcode up to a maximum of five barcodes will be
provided.
4. Contact your Omron Microscan Technical Support representative and provide
the bmp file, the report from the image and below information:



5. If you have more than five barcodes that you would like analyzed and verified
by Omron Microscan, you must contact your Omron Microscan sales
representative to request a quote for barcode analysis. Include the following
information in your e-mail:



LVS-95XX Frequently Asked Questions
LVS-95XX model number (such as LVS-9510)
LVS-95XX serial number (located on system)
LVS-95XX software version running on your computer (located on
"Welcome" tab)
The number of barcodes you want analyzed and verified
LVS-95XX serial number and model number
LVS-95XX software version running on your computer
Page 11 of 17