Table of Contents
Advertisement
SAM88RCRI INSTRUCTION SET
RRC
— Rotate Right Through Carry
RRC
dst
dst (7) ← C
Operation:
C ← dst (0)
dst (n) ← dst (n + 1), n = 0–6
The contents of the destination operand and the carry flag are rotated right one bit position. The
initial value of bit zero (LSB) replaces the carry flag; the initial value of the carry flag replaces bit 7
(MSB).
Flags:
C:
Set if the bit rotated from the least significant bit position (bit zero) was "1".
Z:
Set if the result is "0" cleared otherwise.
S:
Set if the result bit 7 is set; cleared otherwise.
V:
Set if arithmetic overflow occurred, that is, if the sign of the destination changed during rotation;
cleared otherwise.
Format:
opc
Examples:
Given: Register 00H = 55H, register 01H = 02H, register 02H = 17H, and C = "0":
RRC
RRC
In the first example, if general register 00H contains the value 55H (01010101B), the statement
"RRC 00H" rotates this value one bit position to the right. The initial value of bit zero ("1") replaces
the carry flag and the initial value of the C flag ("1") replaces bit 7. This leaves the new value 2AH
(00101010B) in destination register 00H. The sign flag and overflow flag are both cleared to "0".
6-42
C
dst
→
00H
Register 00H = 2AH, C = "1"
→
@01H
Register 01H = 02H, register 02H = 0BH, C = "1"
7
0
Bytes
Cycles
2
S3C9454B/F9454B
Opcode
Addr Mode
(Hex)
4
C0
4
C1
dst
R
IR
Advertisement
Table of Contents
