Speakers - HP ProBook 450 G10 Maintenance And Service Manual

4. Lift the side of the system board upward (5), and then pull the system board away from the
connectors on the side of the computer to remove it (6).
To install the system board, reverse this procedure.

Speakers

To remove the speakers, use this procedure and illustration.
Table 6-9 Speakers description and part number
Description
Speakers
Before removing the speakers, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Remove the battery (see
4. Remove the fan (see
5. Remove the system board (see
NOTE:
Remove the speakers:
1. Remove the four Phillips M2.0 × 2.0 screws (1) that secure the speakers to the computer.
Bottom cover on page
Battery on page
Fan on page
Be sure that the RTC battery remains connected to the system board.
Preparation for disassembly on page
37).
46).
50).
System board on page 54).
Spare part number
M21723-001
37).
Speakers 57