●
Power connector cable (2)
●
Speaker cable (3)
●
Display cable (4)
●
USB cable (ZIF) from USB board (5)
●
USB cable (ZIF) from system board (6)
●
Touchpad cable (ZIF) (7)
●
Keyboard backlight cable (ZIF) (select products only) (8)
●
Keyboard cable (ZIF) (9)
●
Fingerprint reader cable (ZIF) (select products only) (10)
●
RTC battery cable (11)
Important! Leave this cable connected.
●
Antenna cables from the WWAN module (select products only) (12)
2.
Remove the port bracket (1) by removing the three Phillips M2.0 × 4.0 screws (2) that secure the
bracket to the system board and then removing the bracket (3).
3.
Remove the four Phillips M2.0 × 2.5 screws (4) that secure the system board to the computer.
56
Chapter 6 Removal and replacement procedures for authorized service provider parts