Siemens Polymobil 10 Maintenance Manual page 16

1 - 12
Test certificate for
'Technical safety checks'
2.5 Are the required operator documents
complete, present and legible?
2.6 Are all warning labels in place and
recognizable?
2.7 Are the operating symbols,
light indicators and button labels OK?
3. Electrical checks
3.1 Measurement of protective conductor
resistance
3.2 Leakage current or equivalent leakage
current measurement
3.2.1 Leakage current measurement
3.2.2 Equivalent leakage current
measurement
3.3 Patient leakage current or equivalent
patient leakage current measurement
3.3.1 Patient leakage current measurement n.a.
3.3.2 Equivalent patient leakage current
measurement
4. Mechanical checks
4.1 Are all wall, ceiling and floor mountings
secure and undamaged?
4.2 Are all mechanically moved system
parts clean and running smoothly
(lubricated, if required)?
Tab. 1
Polymobil 10
Maintenance instructions,
Test/Comments
2.1.3 Customer documents; check:
SI Customer documentation
Ask the customer for additional required
operator documents and check them for
completeness, availability, and legibility.
2.1.2 Labels; check:
SIM labels
2.9 Radiation; check:
SIE Radiation indicator
2.10 Control console; checks:
SIE Operating devices
SIE Displays
n.a.
2.11 Protective conductor test; check:
SIE Protective conductor test
n.a.
2.12 Leakage current measurement; check:
SIE Leakage current measurement
n.a.
n.a.
n.a.
n.a.
n.a.
2.8 Stand; check:
SIM Support arm locking mechanism
2.6 Single tank; check:
SIM Locking mechanism
2.7 Double-slot diaphragm, check:
SIM Rotatability
RXR8-120.101.01
Rev. 05 07.05
General information
Page 12 of 14
CS PS 24
Siemens AG
Medical Solutions