Toyota HILUX 2008 Owner's Manual page 73

CHILD RESTRAINT ANCHORAGE
1. Remove the plug immediately behind
where the child restraint will be posi-
tioned on the rear seat.
62
Bolt
Anchor fitting
Lock washer
Front of vehicle
2. Install a 5/16" 18 UNC × 30 mm (1.2
in.) bolt through the lock washer and
anchor fitting. Tighten the bolt securely
with the anchor fitting facing the front
of the vehicle as shown.
Use a 5 mm (0.2 in.) or 10 mm (0.4
in.) spacer or both ones if necessary.
Spacers
Upper anchorage strap
Front of vehicle
ATTACHMENT OF THE ATTACHING CLIP
Attach the child restraint attaching clip to
the child restraint anchor fitting. Make
sure the clip is securely attached and
tighten the upper anchorage strap.
Make sure the seat belt is securely
D
locked, and check that the child re-
straint system is secure by pushing
and pulling it in different directions.
Follow all the installation instruc-
D
tions provided by its manufacturer.
Attaching clip
Anchor fitting
CAUTION