Page 2 Pictorial index Search by illustration For safety Make sure to read through them and security Instrument How to read the gauges and meters, the variety of cluster warning lights and indicators, etc. Operation of Opening and closing the doors and windows, each component adjustment before driving, etc.
Page 3: Table Of Contents
TABLE OF CONTENTS For your information .......8 Instrument cluster Reading this manual.....16 How to search ......17 Pictorial index .......18 Instrument cluster Warning lights For safety and security and indicators....144 Gauges and meters... 151 Multi-information display 1-1. For safe use (Type A) ......
Page 4 3-5. Opening and closing the 4-4. Refueling windows Opening the fuel tank Power windows....215 cap ........298 Quarter windows 4-5. Using the driving support (smart-cab models systems only).........219 Cruise control ....303 Back window Rear view monitor (sliding type) ....220 system......
Page 5 TABLE OF CONTENTS ® 5-3. Using the radio 5-10. Bluetooth ® Radio operation ....373 Bluetooth ......430 5-4. Playing an audio CD and 5-11. Using the multimedia MP3/WMA discs system CD player operation...378 Multimedia system .... 442 5-5. Using an external device 5-12.
Page 6 ® 5-16. Playing an audio CD and 5-21. Bluetooth Audio MP3/WMA/AAC discs ® Listening to Bluetooth CD player operation...495 audio ....... 541 ® 5-17. Playing video CD 5-22. Bluetooth Phone ® Video CD player Using a Bluetooth operation......496 Phone......543 Making a call .....
Page 7 TABLE OF CONTENTS Interior features Maintenance and care 6-1. Using the air conditioning 7-1. Maintenance and care system and defogger Cleaning and protecting Boost ventilator system..598 the vehicle exterior..636 Manual air conditioning Cleaning and protecting system ......601 the vehicle interior... 640 Automatic air conditioning 7-2.
Page 8 8-2. Steps to take in an If your vehicle emergency overheats ......787 If your vehicle needs If you run out of fuel to be towed ......733 and the engine stalls (diesel engine only)..791 If you think something is wrong.......739 If the vehicle becomes stuck........
Page 9: For Your Information
● ● Seat belt pretensioner system Be sure to check with your Toyota dealer for precautionary measures or spe- cial instructions regarding installation of an RF-transmitter system. Further information regarding frequency bands, power levels, antenna posi- tions and installation provisions for the installation of RF-transmitters, is avail- able on request at your Toyota dealer.
Page 10 • Operation status of the driving assist systems, such as the ABS and VSC ● Data usage Toyota may use the data recorded in this computer to diagnose malfunctions, conduct research and development, and improve quality. Toyota will not disclose the recorded data to a third party except: •...
Page 11 EDR. ● Disclosure of the EDR data Toyota will not disclose the data recorded in an EDR to a third party except when: • An agreement from the vehicle’s owner (or the lessee for a leased vehicle) is obtained •...
Page 12 Be sure to have the systems of the SRS airbag and seat belt pretensioner removed and disposed of by a qualified service shop or by your Toyota dealer before you scrap your vehicle.
Page 13 Checking your vehicle’s model Check the model code to see what type of model your vehicle is. G U N 1 3 5 – D T T M Basic code  GGN1 Models with 1GR-FE engine  TGN1 Models with 1TR-FE engine ...
Page 14 Transmission type T: 6-speed automatic transmission M: 5-speed manual transmission F: 6-speed manual transmission Grade H: HIGH M: MID S: STD L: LOW X: LOWEST Destination Models for Indonesia Models for Malaysia Models for Latin American countries Models for Argentina Models for Algeria Models for the Philippines Models for African countries...
Page 15 The label or plate is placed as shown in the following illustrations.  Type A The manufacturer’s label or Certification Regulation label is located on the left pillar.  Type B The manufacturer’s label is located on the left pillar. ...
Page 16 HILUX_OM_OM0K440E_(GE)
Page 17: Reading This Manual
Reading this manual WARNING: Explains something that, if not obeyed, could cause death or serious injury to people. NOTICE: Explains something that, if not obeyed, could cause damage to or a malfunction in the vehicle or its equipment. Indicates operating or working procedures. Follow the steps 1 2 3 in numerical order.
Page 18: How To Search
How to search Searching by name ■ • Alphabetical index ..P. 860 Searching installation ■ position • Pictorial index....P. 18 Searching by symptom or ■ sound • What to do if... (Troubleshooting) ..P. 856 Searching by title ■...
Page 19: Pictorial Index
Pictorial index Pictorial index ■ Exterior The shape of the headlights may differ depending on the grade, etc. (P. 712) Side doors ........P. 182 Access panels (smart-cab models only) .
Page 20 Pictorial index Windshield wipers ....... . . P. 295 Precautions against winter season ..... P. 356 To prevent freezing (windshield wiper de-icer) .
Page 21 Pictorial index ■ Instrument panel (Left-hand drive vehicles) Engine switch ....... . P. 250, 253 Starting the engine/changing the positions or modes .
Page 22 Pictorial index Meters ......... . . P. 151 Reading the meters .
Page 23 Pictorial index ■ Switches (Left-hand drive vehicles) Power window switches ......P. 215 Window lock switch .
Page 24 Pictorial index 1, 2 Audio remote control switches ....P. 367, 451 1, 2, 3 Talk switch Meter control switches ......P. 161 “DISP”...
Page 25 Pictorial index Emergency flasher switch ......P. 730 Front-wheel drive control switch ....P. 317 Power outlets .
Page 26 Pictorial index ■ Interior (Left-hand drive vehicles) SRS airbags ........P. 47 Floor mats .
Page 27 Pictorial index Cup holders ........P. 623 Auxiliary boxes .
Page 28 Pictorial index Inside rear view mirror ......P. 210 Sun visors ........P. 629 Vanity mirror .
Page 29 Pictorial index ■ Instrument panel (Right-hand drive vehicles) Engine switch ....... . P. 250, 253 Starting the engine/changing the positions or modes .
Page 30 Pictorial index Meters ......... . . P. 151 Reading the meters .
Page 31 Pictorial index ■ Switches (Right-hand drive vehicles) Power window switches ......P. 215 Window lock switch .
Page 32 Pictorial index 1, 2 Audio remote control switches ....P. 367, 451 1, 2, 3 Talk switch Meter control switches ......P. 161 “DISP”...
Page 33 Pictorial index Emergency flasher switch ......P. 730 Front-wheel drive control switch ....P. 317 Power outlets .
Page 34 Pictorial index ■ Interior (Right-hand drive vehicles) SRS airbags ........P. 47 Floor mats .
Page 35 Pictorial index Cup holders ........P. 623 Auxiliary boxes .
Page 36 Pictorial index Inside rear view mirror ......P. 210 Sun visors ........P. 629 Vanity mirror .
Page 37 Pictorial index HILUX_OM_OM0K440E_(GE)
Page 38: For Safety And Security
For safety and security 1-1. For safe use Before driving.......38 For safe driving ....40 Seat belts......42 SRS airbags......47 Exhaust gas precautions ..58 1-2. Child safety Airbag manual on-off system .......59 Riding with children....61 Child restraint systems ..62 1-3. Theft deterrent system Engine immobilizer system ......130 Double locking system..134...
Page 39: 1-1. For Safe Use
1-1. For safe use Before driving Floor mat Use only floor mats designed specifically for vehicles of the same model and model year as your vehicle. Fix them securely in place onto the carpet. Insert the retaining hooks (clips) into the floor mat eyelets. Turn the upper knob of each retaining hook (clip) to secure the floor mats in place.
Page 40 When installing the driver’s floor mat Do not use floor mats designed for other models or different model year ● vehicles, even if they are Toyota Genuine floor mats. ● Only use floor mats designed for the driver’s seat. Always install the floor mat securely using the retaining hooks (clips) pro- ●...
Page 41: For Safe Driving
1-1. For safe use For safe driving For safe driving, adjust the seat and mirror to an appropriate position before driving. Correct driving posture Adjust the angle of the seat- back so that you are sitting straight up and so that you do not have to lean forward to steer.
Page 42 1-1. For safe use Adjusting the mirrors Make sure that you can see backward clearly by adjusting the inside and outside rear view mirrors properly. (P. 210, 212) WARNING Observe the following precautions. Failure to do so may result in death or serious injury. Do not adjust the position of the driver’s seat while driving.
Page 43: Seat Belts
1-1. For safe use Seat belts Make sure that all occupants are wearing their seat belts before driving the vehicle. Correct use of the seat belts ◆ 3-point type ● Extend the shoulder belt so that it comes fully over the shoulder, but does not come into contact with the neck or slide off the shoulder.
Page 44 1-1. For safe use Fastening and releasing the seat belt To fasten the seat belt, push the plate into the buckle until a click sound is heard. To release the seat belt, press the release button. Release button Adjusting the seat belt shoulder anchor height (if equipped for front seats) Push the seat belt shoulder anchor down while pulling the...
Page 45 Seat belt regulations ■ If seat belt regulations exist in the country where you reside, please contact your Toyota dealer for seat belt replacement or installation. HILUX_OM_OM0K440E_(GE)
Page 46 Each seat belt should be used by one person only. Do not use a seat belt for more than one person at once, including children. Toyota recommends that children be seated in the rear seat and always ● use a seat belt and/or an appropriate child restraint system.
Page 47 Ensure that the belt and plate are locked and the belt is not twisted. ● If the seat belt does not function correctly, immediately contact your Toyota dealer. ● Replace the seat assembly, including the belts, if your vehicle has been involved in a serious accident, even if there is no obvious damage.
Page 48: Srs Airbags
1-1. For safe use SRS airbags The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury. ◆...
Page 49 1-1. For safe use SRS airbag system components Front impact sensors Side impact sensors (rear) (if equipped) Front passenger airbag Side airbags (if equipped) Airbag manual on-off switch (if equipped) Curtain shield airbags (if equipped) “PASSENGER AIR BAG” indi- cator (if equipped) SRS warning light Side impact...
Page 50 1-1. For safe use The main SRS airbag system components are shown above. The SRS airbag system is controlled by the airbag sensor assembly. As the airbags deploy, a chemical reaction in the inflators quickly fills the airbags with non-toxic gas to help restrain the motion of the occu- pants.
Page 51 An infant or child who is too small to use a seat belt should be properly secured using a child restraint sys- tem. Toyota strongly recommends that all infants and children be placed in the rear seats (if equipped) of the vehicle and properly restrained. The rear seats (if equipped) are safer for infants and children than the front passen- ger seat.
Page 52 1-1. For safe use WARNING SRS airbag precautions ■ ● Vehicles with SRS side and curtain shield airbags: Do not lean against the door, the roof side rail or the front, side and rear pillars. Vehicles with SRS side and curtain ●...
Page 53 Toyota dealer. ● Vehicles without SRS side and curtain shield airbags: If the areas where the SRS airbags are stored, such as the steering wheel pad, are damaged or cracked, have them replaced by your Toyota dealer. HILUX_OM_OM0K440E_(GE)
Page 54 ■ Do not dispose of your vehicle or perform any of the following modifications without consulting your Toyota dealer. The SRS airbags may malfunction or deploy (inflate) accidentally, causing death or serious injury. Installation, removal, disassembly and repair of the SRS airbags ●...
Page 55 1-1. For safe use ■ If the SRS airbags deploy (inflate) ● Slight abrasions, burns, bruising etc., may be sustained from SRS airbags, due to the extremely high speed deployment (inflation) by hot gases. ● A loud noise and white powder will be emitted. ●...
Page 56 1-1. For safe use ■ SRS airbag deployment conditions (SRS side and curtain shield airbags) The SRS side and curtain shield airbags will deploy in the event of an ● impact that exceeds the set threshold level (the level of force corresponding to the impact force produced by an approximately 1500 kg [3300 lb.] vehicle colliding with the vehicle cabin from a direction perpendicular to the vehicle orientation at an approximate speed of 20 - 30 km/h [12 - 18 mph]).
Page 57 Vehicle rollover When to contact your Toyota dealer ■ In the following cases, the vehicle will require inspection and/or repair. Con- tact your Toyota dealer as soon as possible. Any of the SRS airbags have been inflated. ● ● The front of the vehicle is damaged or...
Page 58 1-1. For safe use ● Vehicles with SRS side and curtain shield airbags: A portion of a door or its surrounding area damaged deformed, or the vehicle was involved in an accident that was not severe enough to cause the SRS side and curtain shield airbags to inflate.
Page 59: Exhaust Gas Precautions
The exhaust system needs to be checked periodically. If there is a hole or crack caused by corrosion, damage to a joint or abnormal exhaust noise, be sure to have the vehicle inspected and repaired by your Toyota dealer. HILUX_OM_OM0K440E_(GE)
Page 60: Child Safety
1-2. Child safety  Airbag manual on-off system This system deactivates the front passenger airbag. Only deactivate the airbag when using a child restraint system on the front passenger seat. “PASSENGER AIR BAG” indi- cator Vehicles without smart entry & start system: The ON indicator light turns on when the airbag system is on (only when the engine switch is...
Page 61 “PASSENGER AIR BAG” indicator information ■ If any of the following problems occur, it is possible that there is a malfunction in the system. Have the vehicle inspected by your Toyota dealer. ● Neither “ON” nor “OFF” comes on. The indicator light does not change when the airbag manual on-off switch is ●...
Page 62: Riding With Children
1-2. Child safety Riding with children Observe the following precautions when children are in the vehi- cle. Use a child restraint system appropriate for the child, until the child becomes large enough to properly wear the vehicle’s seat belt. ● It is recommended that children sit in the rear seats (if equipped) to avoid accidental contact with the shift lever, wiper switch etc.
Page 63: Child Restraint Systems
● For Azerbaijan, Armenia, Georgia and Turkmenistan: The use of a Toyota genuine child restraint system is recommended, as it is safer to use in this vehicle. Toyota genuine child restraint systems are made specifically for Toyota vehicles. They can be purchased at a Toyota dealer.
Page 64: Points To Remember
● Except for Azerbaijan, Armenia, Georgia and Turkmenistan: If child restraint system regulations exist in the country where you reside, please contact your Toyota dealer for the child restraint system installation. ● Use a child restraint system until the child becomes large enough to properly wear the vehicle’s seat belt.
Page 65 ● Toyota strongly urges the use of a proper child restraint system that con- forms to the weight and size of the child, installed on the rear seat. Accord- ing to accident statistics, the child is safer when properly restrained in the rear seat than in the front seat.
Page 66: When Using A Child Restraint System
1-2. Child safety When using a child restraint system When installing a child restraint system to a front passenger ■ seat For the safety of a child, install child restraint systems to a rear seats. When installing child restraint system to a front passenger seat is unavoidable, adjust the seat as follows and install the child restraint system.
Page 67 1-2. Child safety WARNING When using a child restraint system ■ Observe the following precautions. Failure to do so may result in death or serious injury. Vehicles without airbag manual on-off ● switch: Never use a rear-facing child restraint system on the front passenger seat.
Page 68 1-2. Child safety WARNING HILUX_OM_OM0K440E_(GE)
Page 69 1-2. Child safety WARNING When using a child restraint system ■ ● Only put a forward-facing child restraint system on the front seat when unavoid- able. When installing a forward-facing child restraint on the front passenger seat, move the seat as far back as pos- sible.
Page 70: Child Restraint System Compatibility For Each Seating Position
1-2. Child safety Child restraint system compatibility for each seating position (except for Azerbaijan, Armenia, Georgia, Turkmenistan, Malay- sia, Thailand, Indonesia and Latin American countries : Belize, Costa Rica, R.Dominica, Guatemala, Haiti, Honduras, Nicaragua, Panama, Trinidad (& Tobago), El Salvador, Bahamas, Jamaica, Barbados, Bermuda, Guadalupe, Martinique,...
Page 71 1-2. Child safety Before confirming the compatibility of each seating position ■ with child restraint systems Checking the child restraint system standards. Use a child restraint system that conforms to UN(ECE) R44 1, 2 UN(ECE) R129 The following approval mark is displayed on child restraint sys- tems which are conformed.
Page 72 1-2. Child safety Checking the category of the child restraint system. Check the approval mark of the child restraint system for which of the following categories the child restraint system is suitable. Also, if there are any uncertainties, check the user’s guide included with the child restraint system or contact the retailer of the child restraint system.
Page 73 1-2. Child safety Compatibility of each seating position with child restraint sys- ■ tems  Single-cab and smart-cab models without the rear seats Left-hand drive vehicles: Right-hand drive vehicles: 1, 2, 3 Suitable for “universal” category child restraint system fixed with the seat belt.
Page 74 1-2. Child safety : Vehicles without the bench type front seat: Move the front seat fully rear- ward. If the passenger seat height can be adjusted, move it to the upper most position. : Adjust the seatback angle to the most upright position.
Page 75 1-2. Child safety  Smart-cab models with the rear seats 1, 2, 3 Suitable for “universal” category child restraint system fixed with the seat belt. Not suitable for child restraint system. Vehicles without airbag manual on-off switch: Never use a rear- facing child restraint system on the front passenger seat.
Page 76 1-2. Child safety : Move the front seat fully rearward. If the passenger seat height can be adjusted, move it to the upper most position. : Adjust the seatback angle to the most upright position. When installing a forward-facing child seat, if there is a gap between the child seat and the seatback, adjust the seatback angle until good contact is achieved.
Page 77 1-2. Child safety  Double-cab models Left-hand drive vehicles with 3- Left-hand drive vehicles with 2- point type rear center seat belt: point type rear center seat belt: Right-hand drive vehicles with 3- Right-hand drive vehicles with 2- point type rear center seat belt: point type rear center seat belt: HILUX_OM_OM0K440E_(GE)
Page 78 1-2. Child safety 1, 2, 3 Suitable for “universal” category child restraint system fixed with the seat belt. Suitable for i-Size and ISOFIX child restraint system. Includes a top tether anchorage point. Not suitable for child restraint system. Vehicles without airbag manual on-off switch: Never use a rear- facing child restraint system on the front passenger seat.
Page 79 1-2. Child safety : Vehicles without the bench type front seat: Move the front seat fully rear- ward. If the passenger seat height can be adjusted, move it to the upper most position. : Adjust the seatback angle to the most upright position.
Page 80 1-2. Child safety Detail information for child restraint systems installation ■ Single-cab and smart-cab models  Seating position Vehicles with airbag manual on-off switch Seat position number Vehicles without airbag manual Airbag manual on-off on-off switch switch Seating position suitable for Forward facing Forward fac- universal belted (Yes/No)
Page 81 1-2. Child safety ISOFIX child restraint systems are divided into different “fixture”. The child restraint system can be used in the seating positions for “fixture” mentioned in the table above. For kind of “fixture” relation, confirm the following table. If your child restraint system has no kind of “fixture” (or if you can- not find information in the table below), please refer to the child restraint system “vehicle list”...
Page 82 1-2. Child safety ● When installing a child seat with support base, if the child seat interferes with the seatback when latching it into the support base, adjust the seatback rearward until there is no interference. ● Vehicles without the bench type front seat: If the seat belt shoulder...
Page 83 1-2. Child safety  Double-cab models Seating position Vehicles with airbag man- ual on-off Seat position num- Vehicles switch without air- bag manual Airbag man- on-off switch ual on-off switch For- Seating position Forward fac- ward suitable for univer- sal belted (Yes/No) ing only facing only...
Page 84 1-2. Child safety ISOFIX child restraint systems are divided into different “fixture”. The child restraint system can be used in the seating positions for “fixture” mentioned in the table above. For kind of “fixture” relation, confirm the following table. If your child restraint system has no kind of “fixture” (or if you can- not find information in the table below), please refer to the child restraint system “vehicle list”...
Page 85 1-2. Child safety ● When installing a child restraint in the rear seats, adjust the front seat so that it does not interfere with the child or child restraint system (if equipped). ● When installing a child seat with support base in the front seat, if the child seat interferes with the seatback when latching it into the support base, adjust the seatback rearward until there is no interference.
Page 86: For Azerbaijan, Armenia, Georgia And Turkmenistan
1-2. Child safety Child restraint system compatibility for each seating position (for Azerbaijan, Armenia, Georgia and Turkmenistan) Child restraint system compatibility for each seating position ■ Compatibility of each seating position with child restraint systems (P. 87) displays the type of child restraint systems that can be used and possible seating positions for installation using symbols.
Page 87 1-2. Child safety UN(ECE) R129 approval mark The height range of the child who is applicable as well as available weights for an UN(ECE) R129 approval mark is indi- cated. : UN(ECE) R44 and UN(ECE) R129 are U.N. regulations for child restraint systems.
Page 88 1-2. Child safety Compatibility of each seating position with child restraint sys- ■ tems  Vehicles with 3-point type rear  Vehicles with 2-point type rear center seat belt center seat belt 1, 2, 3 Suitable for “universal” category child restraint system fixed with the seat belt.
Page 89 1-2. Child safety Includes a top tether anchorage point. Not suitable for child restraint system. Vehicles without airbag manual on-off switch: Never use a rear- facing child restraint system on the front passenger seat. Vehicles with airbag manual on-off switch: Never use a rear-facing child restraint system on the front passenger seat when the airbag manual on-off switch is on.
Page 90 1-2. Child safety Detail information for child restraint systems installation ■ Seating position Vehicles with airbag man- ual on-off Seat position num- Vehicles switch without air- bag manual Airbag man- on-off switch ual on-off switch For- Seating position Forward fac- ward suitable for univer- ing only...
Page 91 1-2. Child safety ISOFIX child restraint systems are divided into different “fixture”. The child restraint system can be used in the seating positions for “fixture” mentioned in the table above. For kind of “fixture” relation, confirm the following table. If your child restraint system has no kind of “fixture” (or if you can- not find information in the table below), please refer to the child restraint system “vehicle list”...
Page 92 1-2. Child safety Recommended child restraint systems and Compatibility table ■ Seating position Vehicles Recom- with airbag Vehi- mended Child Mass groups manual on- cles Restraint Sys- off switch without airbag Airbag manual manual on- on-off off switch switch G0+, BABY SAFE PLUS Yes Yes Yes Yes...
Page 93 1-2. Child safety When securing some types of child restraint systems in rear seat, it may not be possible to properly use the seat belts in positions next to the child restraint without interfering with it or affecting seat belt effectiveness.
Page 94: For Malaysia, Thailand And Indonesia
1-2. Child safety Child restraint system compatibility for each seating position (for Malaysia, Thailand and Indonesia) Child restraint system compatibility for each seating position ■ Compatibility of each seating position with child restraint systems (P. 96) displays the type of child restraint systems that can be used and possible seating positions for installation using symbols Also, the recommended child restraint system that is suitable for your child can be selected.
Page 95 1-2. Child safety Before confirming the compatibility of each seating position ■ with child restraint systems Checking the child restraint system standards. Use a child restraint system that conforms to UN(ECE) R44 1, 2 UN(ECE) R129 The following approval mark is displayed on child restraint sys- tems which are conformed.
Page 96 1-2. Child safety Checking the category of the child restraint system. Check the approval mark of the child restraint system for which of the following categories the child restraint system is suitable. Also, if there are any uncertainties, check the user’s guide included with the child restraint system or contact the retailer of the child restraint system.
Page 97 1-2. Child safety Compatibility of each seating position with child restraint sys- ■ tems  Single-cab and smart-cab models 1, 2, 3 Suitable for “universal” category child restraint system fixed with the seat belt. Never use a rear-facing child restraint system on the front passen- ger seat when the airbag manual on-off switch is on.
Page 98 1-2. Child safety : Vehicles without the bench type front seat: Move the front seat fully rear- ward. If the passenger seat height can be adjusted, move it to the upper most position. : Adjust the seatback angle to the most upright position.
Page 99 1-2. Child safety  Double-cab models Vehicles with 3-point type rear Vehicles with 2-point type rear center seat belt: center seat belt: 1, 2, 3 Suitable for “universal” category child restraint system fixed with the seat belt. Suitable for child restraint systems given on recommended child restraint systems and compatibility table (P.
Page 100 1-2. Child safety Includes a top tether anchorage point. Not suitable for child restraint system. Never use a rear-facing child restraint system on the front passen- ger seat when the airbag manual on-off switch is on. : Move the front seat fully rearward. If the passenger seat height can be adjusted, move it to the upper most position.
Page 101 1-2. Child safety Detail information for child restraint systems installation ■ Single-cab and smart-cab models  Seating position Seat position number Airbag manual on-off switch Forward Seating position suitable for universal belted (Yes/No) facing only i-Size seating position (Yes/No) Seating position suitable for lateral fixture (L1/L2/No) Suitable rearward facing fixture (R1/R2X/R2/R3/No) Suitable forward facing fixture (F2X/F2/F3/No) Suitable junior seat fixture (B2/B3/No)
Page 102 1-2. Child safety ISOFIX child restraint systems are divided into different “fixture”. The child restraint system can be used in the seating positions for “fixture” mentioned in the table above. For kind of “fixture” relation, confirm the following table. If your child restraint system has no kind of “fixture” (or if you can- not find information in the table below), please refer to the child restraint system “vehicle list”...
Page 103 1-2. Child safety ● When installing a child seat with support base, if the child seat interferes with the seatback when latching it into the support base, adjust the seatback rearward until there is no interference. ● Vehicles without the bench type front seat: If the seat belt shoulder...
Page 104 1-2. Child safety  Double-cab models Seating position Vehicles with air- bag manual on-off Seat position number switch Airbag manual on- off switch Seating position Forward suitable for universal belted facing (Yes/No) only i-Size seating position (Yes/ Seating position suitable for lateral fixture (L1/L2/No) Suitable rearward R2X,...
Page 105 1-2. Child safety ISOFIX child restraint systems are divided into different “fixture”. The child restraint system can be used in the seating positions for “fixture” mentioned in the table above. For kind of “fixture” relation, confirm the following table. If your child restraint system has no kind of “fixture” (or if you can- not find information in the table below), please refer to the child restraint system “vehicle list”...
Page 106 1-2. Child safety Recommended child restraint systems and Compatibility table ■ (double-cab models only) Seating position Recom- Vehicles with mended Child airbag manual Restraint Sys- on-off switch Airbag manual on-off switch i-Size child i-Size MIDI Restraint (Yes/No) systems The child restraint systems mentioned in the table may not be avail- able outside the ASEAN area.
Page 107 1-2. Child safety ● When installing a child restraint in the rear seats, adjust the front seat so that it does not interfere with the child or child restraint system. ● When installing a child seat with support base in the front seat, if the child seat interferes with the seatback when latching it into the support base, adjust the seatback rearward until there is no interference.
Page 108: For Latin American Countries
1-2. Child safety Child restraint system compatibility for each seating position (for Latin American countries : Belize, Costa Rica, R.Dominica, Guatemala, Haiti, Honduras, Nicaragua, Panama, Trinidad (& Tobago), El Salvador, Bahamas, Jamaica, Barbados, Bermuda, Guadalupe, Martinique, G.Cayman, Antigua, Grenada, Montserrat, St.Lucia, St.Vincent, St.Kitts, Argentina, Bolivia, Guyana, Chile, Colombia, Ecuador, F.Guiana, Aruba, Curacao, Suriname, Paraguay, Peru, Uruguay and St.Maarten Child restraint system compatibility for each seating position...
Page 109 1-2. Child safety Before confirming the compatibility of each seating position ■ with child restraint systems Checking the child restraint system standards. Use a child restraint system that conforms to UN(ECE) R44 1, 2 UN(ECE) R129 The following approval mark is displayed on child restraint sys- tems which are conformed.
Page 110 1-2. Child safety Checking the category of the child restraint system. Check the approval mark of the child restraint system for which of the following categories the child restraint system is suitable. Also, if there are any uncertainties, check the user’s guide included with the child restraint system or contact the retailer of the child restraint system.
Page 111 1-2. Child safety Compatibility of each seating position with child restraint sys- ■ tems  Single-cab and smart-cab models Left-hand drive vehicles: Right-hand drive vehicles: 1, 2, 3 Suitable for “universal” category child restraint system fixed with the seat belt. Never use a rear-facing child restraint system on the front passen- ger seat when the airbag manual on-off switch is on.
Page 112 1-2. Child safety : Vehicles without the bench type front seat: Move the front seat fully rear- ward. If the passenger seat height can be adjusted, move it to the upper most position. : Adjust the seatback angle to the most upright position.
Page 113 1-2. Child safety  Double-cab models Left-hand drive vehicles: Right-hand drive vehicles: 1, 2, 3 Suitable for “universal” category child restraint system fixed with the seat belt. Suitable for child restraint systems given on recommended child restraint systems and compatibility table (P. 119). Suitable for i-Size and ISOFIX child restraint system.
Page 114 1-2. Child safety : Move the front seat fully rearward. If the passenger seat height can be adjusted, move it to the upper most position. : Adjust the seatback angle to the most upright position. When installing a forward-facing child seat, if there is a gap between the child seat and the seatback, adjust the seatback angle until good contact is achieved.
Page 115 1-2. Child safety Detail information for child restraint systems installation ■ Single-cab and smart-cab models  Seating position Seat position number Airbag manual on-off switch Seating position suitable for universal belted Forward facing (Yes/No) only i-Size seating position (Yes/No) Seating position suitable for lateral fixture (L1/L2/No) Suitable rearward facing fixture (R1/R2X/ R2/R3/No)
Page 116 1-2. Child safety ISOFIX child restraint systems are divided into different “fixture”. The child restraint system can be used in the seating positions for “fixture” mentioned in the table above. For kind of “fixture” relation, confirm the following table. If your child restraint system has no kind of “fixture” (or if you can- not find information in the table below), please refer to the child restraint system “vehicle list”...
Page 117 1-2. Child safety ● When installing a child seat with support base, if the child seat interferes with the seatback when latching it into the support base, adjust the seatback rearward until there is no interference. ● Vehicles without the bench type front seat: If the seat belt shoulder...
Page 118 1-2. Child safety  Double-cab models Seating position Vehicles with air- bag manual on-off Seat position number switch Airbag manual on- off switch Seating position Forward suitable for universal belted (Yes/ facing only i-Size seating position (Yes/No) Seating position suitable for lateral fixture (L1/L2/No) R1, R2X, R1, R2X,...
Page 119 1-2. Child safety ISOFIX child restraint systems are divided into different “fixture”. The child restraint system can be used in the seating positions for “fixture” mentioned in the table above. For kind of “fixture” relation, confirm the following table. If your child restraint system has no kind of “fixture” (or if you can- not find information in the table below), please refer to the child restraint system “vehicle list”...
Page 120 1-2. Child safety Recommended child restraint systems and Compatibility table ■ (double-cab models only) Seating position Vehicles with Recommended airbag manual Mass groups Child Restraint on-off switch System Airbag manual on-off switch 0, 0+ MIDI 2 (Yes/No) Up to 13 kg (28 lb.) MIDI 2 (Yes/No) 9 to 18 kg (20 to 39 lb.) The child restraint systems mentioned in the table may not be avail-...
Page 121 1-2. Child safety ● When installing a child restraint in the rear seats, adjust the front seat so that it does not interfere with the child or child restraint system. ● When installing a child seat with support base in the front seat, if the child seat interferes with the seatback when latching it into the support base, adjust the seatback rearward until there is no interference.
Page 122: Child Restraint System Installation Method
1-2. Child safety Child restraint system installation method Confirm with the operation manual enclosed with the child restraint system about the installation of the child restraint system. Installation method Page Seat belt P. 122 attachment ISOFIX lower anchorage attach- P. 124 ment Top tether anchor- P.
Page 123: Fixed With A Seat Belt
1-2. Child safety Child restraint system fixed with a seat belt Installing child restraint system using a seat belt ■ Install the child restraint system in accordance to the operation manual enclosed with the child restraint system. If the child restraint system on hand is not within the “universal” cat- egory (or the necessary information is not in the table), refer to the “Vehicle List”...
Page 124 You may need a locking clip to install the child restraint system. Follow the instructions provided by the manufacturer of the system. If your child restraint system does not provide a locking clip, you can purchase the following item from your Toyota dealer: Locking clip for child restraint system (Part No. 73119-22010) ■...
Page 125: Fixed With An Isofix Lower Anchorage (If Equipped)
1-2. Child safety Child restraint system fixed with an ISOFIX lower anchorage (if equipped) ISOFIX lower anchorages (ISOFIX child restraint system) ■ Lower anchorages are provided for the outboard rear seats. (Tags displaying the location of the anchorages are attached to the seats.) Installation with ISOFIX lower anchorage (ISOFIX child ■...
Page 126 1-2. Child safety Check the positions of the exclusive fixing bars, and install the child restraint sys- tem to the seat. The bars are installed in the clearance between the seat cushion and seatback. After installing the child restraint system, rock it back and forth to ensure that it is installed securely.
Page 127 1-2. Child safety ■ When removing the head restraint to install a child restraint system After removing the child restraint system, make sure to reinstall the head restraint. WARNING When installing a child restraint system ■ Observe the following precautions. Failure to do so may result in death or serious injury.
Page 128: Using A Top Tether Anchorage (If Equipped)
1-2. Child safety Using a top tether anchorage (if equipped) Top tether anchorage ■ Top tether anchorage is located the center of the rear seat and pro- vided for the outboard rear seat. Use top tether anchorage when fixing the top strap. Top tether anchorage Top strap...
Page 129 1-2. Child safety Pull up the anchor strap router. Route the top strap through Anchor strap router the anchor strap router as shown in the illustration. Latch the hook onto the top tether anchorage and tighten top tether the top strap. anchorage Make sure the top strap is securely latched.
Page 130 1-2. Child safety WARNING When installing a child restraint system ■ Observe the following precautions. Failure to do so may result in death or serious injury. Firmly attach the top strap. ● Do not attach the top strap to anything other than the top tether anchor- ●...
Page 131: 1-3. Theft Deterrent System
1-3. Theft deterrent system  Engine immobilizer system The vehicle’s keys have built-in transponder chips that prevent the engine from starting if a key has not been previously regis- tered in the vehicle’s on-board computer. Never leave the keys inside the vehicle when you leave the vehi- cle.
Page 132 1-3. Theft deterrent system Vehicles with smart entry & start system: The indicator light flashes after the engine switch has been turned off to indicate that the system is operating. The indicator light stops flashing after the engine switch has been turned to ACCESSORY or IGNITION ON mode to indicate that the system has been canceled.
Page 133 1-3. Theft deterrent system ■ Certification for the engine immobilizer system (vehicles without smart entry & start system)  For vehicles sold in Singapore  For vehicles sold in Vietnam  For vehicles sold in Jamaica  For vehicles sold in R.Dominica HILUX_OM_OM0K440E_(GE)
Page 134 1-3. Theft deterrent system ■ Certification for the engine immobilizer system (vehicles with smart entry & start system)  For vehicles sold in Singapore  For vehicles sold in Vietnam  For vehicles sold in Jamaica  For vehicles sold in R.Dominica NOTICE To ensure the system operates correctly ■...
Page 135: Double Locking System
1-3. Theft deterrent system  Double locking system Unauthorized access to the vehicle is prevented by disabling the door unlocking function from both the interior and exterior of the vehicle. Vehicles employing this system have labels on the window glass of both front doors.
Page 136 1-3. Theft deterrent system Canceling the double locking system Using the entry function (vehicles with smart entry & start system): Unlock the doors by pressing the lock/unlock button on the outside door handle. Using the wireless remote control: Press WARNING Double locking system precaution ■...
Page 137: Alarm
1-3. Theft deterrent system  Alarm The alarm The alarm uses light and sound to give an alert when an intrusion is detected. The alarm is triggered in the following situations when the alarm is set:  Except for Armenia, Georgia, Turkmenistan, Malaysia and Morocco ●...
Page 138 1-3. Theft deterrent system Setting the alarm system Close the doors and hood, and lock all the doors using the entry function (vehicles with smart entry & start system) or wireless remote control. The system will be set automatically after 30 seconds. Except for Armenia, Georgia,...
Page 139 1-3. Theft deterrent system ■ Triggering of the alarm The alarm may be triggered in the following situations: (Stopping the alarm deactivates the alarm system.) ● For Armenia, Georgia, Turkmenistan, Malaysia and Morocco: The doors are unlocked using the key and are opened. A person inside the vehicle opens a door ●...
Page 140 1-3. Theft deterrent system Intrusion sensor (if equipped) The intrusion sensor detects intruders or movement in the vehicle. When an intruder or movement is detected, the alarm will be trig- gered. This system is designed to deter and prevent vehicle theft but does not guarantee absolute security against all intrusions.
Page 141 1-3. Theft deterrent system ■ Canceling and automatic re-enabling of the intrusion sensor (if equipped) The alarm will still be set even when the intrusion sensor is canceled. ● ● Vehicles without smart entry & start system: After the intrusion sensor is canceled, turning the engine switch to the “ON”...
Page 142 Do not spray air fresheners or other ● products directly into the sensor holes. Installing accessories other than genuine Toyota parts or leaving objects ● between the driver’s seat and front passenger’s seat may reduce the detection performance.
Page 143 1-3. Theft deterrent system HILUX_OM_OM0K440E_(GE)
Page 144: Instrument Cluster
Instrument cluster Instrument cluster Warning lights and indicators ....144 Gauges and meters ...151 Multi-information display (Type A)......156 Multi-information display (Type B)......160 Fuel consumption information.......168 HILUX_OM_OM0K440E_(GE)
Page 145: Instrument Cluster Warning Lights
2. Instrument cluster Warning lights and indicators The warning lights and indicators on the instrument cluster and center panel inform the driver of the status of the vehicle’s vari- ous systems. For the purpose of explanation, the following illustrations dis- play all warning lights and indicators illuminated.
Page 146 2. Instrument cluster  Vehicles with multi-information display type B Warning lights Warning lights inform the driver of malfunctions in the indicated vehi- cle’s systems. Brake system warning ABS warning light light (P. 742) (P. 743) Charging system Slip indicator (P. 743) warning light (P.
Page 147 2. Instrument cluster 1, 4 Automatic transmission Low fuel level warning fluid temperature light (P. 746) warning light (P. 744) (if equipped) Timing belt replacement Low engine oil level warning light (P. 744) warning light (P. 746) (if equipped) (if equipped) Fuel system warning Master warning light light (P.
Page 148 There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer. : The light turns on or flashes to indicate a malfunction.
Page 149 There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer. : The light turns to green. : The light flashes to indicate that the system is operating.
Page 150 2. Instrument cluster ■ Eco Driving Indicator (if equipped) Eco Driving Indicator Light Vehicles with automatic transmission: During Eco-friendly acceleration (Eco driving), Eco Driving Indicator Light will turn on. When the accelerator pedal is depressed excessively, or when the vehicle is stopped, the light turns off. Vehicles with manual transmission: During Eco-friendly acceleration or in Eco-friendly shift position (Eco driving),...
Page 151 Have the vehicle inspected by your Toyota dealer immedi- ately if this occurs.
Page 152: Gauges And Meters
2. Instrument cluster Gauges and meters  Vehicles without multi-information display Vehicles with multi-information display type A  HILUX_OM_OM0K440E_(GE)
Page 153 2. Instrument cluster  Vehicles with multi-information display type B Tachometer Displays the engine speed in revolutions per minute. Outside temperature Displays the outside temperature. The temperature range that can be dis- played is from -40C (-40F) to 50C (122F). The low outside temperature indicator comes on when the ambient temperature is approximately 3C (37F) or lower, and goes off when approximately 5C (41F) or higher.
Page 154 2. Instrument cluster Engine coolant temperature gauge Displays the engine coolant temperature. Changing the display Vehicles without multi-information display  Pressing this button switches between odometer and trip meter dis- plays. Odometer Trip meter A Trip meter B : Pressing and holding the button will reset the trip meter.
Page 155 When the outside temperature has changed suddenly (at the entrance/exit ● of a garage, tunnel, etc.) ■ When “--” is displayed The system may be malfunctioning. Take your vehicle to your Toyota dealer. WARNING ■ The information display at low temperatures (vehicles with multi-infor- mation display type B) Allow the interior of the vehicle to warm up before using the liquid crystal information display.
Page 156 2. Instrument cluster NOTICE To prevent damage to the engine and its components ■ ● Do not let the indicator needle of the tachometer enter the red zone, which indicates the maximum engine speed. The engine may be overheating if the engine coolant temperature gauge is ●...
Page 157: Multi-Information Display (Type A)
2. Instrument cluster  Multi-information display (Type A) Display contents The multi-information display presents the driver with a variety of driv- ing-related data. ● Trip information (P. 157) Displays driving range, fuel con- sumption other cruising- related information. ● Setting (P. 849) The settings of the following items can be changed.
Page 158 2. Instrument cluster Switching the display “DISP” button Items displayed can be switched by pressing the “DISP” button. Trip information Current fuel consumption ■ Displays the current rate of fuel consumption. Average fuel consumption ■ Displays the average fuel consumption since the engine switch is turned to the “ON”...
Page 159 2. Instrument cluster Average vehicle speed ■ Displays the average vehicle speed since the engine switch is turned to the “ON” position (vehicles without smart entry & start sys- tem) or IGNITION ON mode (vehicles with smart entry & start sys- tem).
Page 160 2. Instrument cluster WARNING Caution for use while driving ■ ● When operating the multi-information display while driving, pay extra attention to the safety of the area around the vehicle. Do not look continuously at the multi-information display while driving as ●...
Page 161: Multi-Information Display (Type B)
2. Instrument cluster  Multi-information display (Type B) Display contents The multi-information display presents the driver with a variety of vehi- cle data. The following information will be displayed when a menu icon is selected. Menu icons are displayed for a few seconds when the meter con- trol switches (P.
Page 162 2. Instrument cluster Settings display Select to change the meter display settings. (P. 849) Operating the meter control switches The multi-information display is operated using the meter control switches. Enter/Set Select an item/Change pages Return to the previous screen Press: Displays the screen registered as the top screen When no screen has been registered, the drive information screen will be displayed.
Page 163 2. Instrument cluster Drive information Items displayed can be switched by pressing “” or “” of the meter control switches to select and pressing “” or “”. Drive information 1 and 2 ■ 1, 2 ● Current fuel economy (bar type/value type) Displays the current rate of fuel consumption.
Page 164 2. Instrument cluster Idling stop (if equipped) ■ Displays the total idling stop time (engine stop time via the Stop & Start system) since the function was reset and the engine was started respectively. (P. 335) Eco Driving Indicator Zone Display (if equipped) ■...
Page 165 2. Instrument cluster Settings display The settings of the following items can be changed, refer to P. 848 ● Language Select to change the language on the display. ● Units Select to change the unit for measure of the fuel consumption. ●...
Page 166 2. Instrument cluster ■ Pop-up display In some situations, such as when a switch operation is performed, a pop-up display will be temporarily displayed on the multi-information display. The pop-up display function can be set on/off. (P. 850) ■ Eco Score (if equipped) Driving conditions are displayed in 5 stages and divided into 3 categories: start, cruise and stop.
Page 167 2. Instrument cluster ■ Eco Saving Displays the fuel consumption comparison, the average fuel consumption after reset, and the cost of the consumed fuel. Fuel consumption comparison Displays the set fuel consumption that is compared with the actual fuel con- sumption.
Page 168 2. Instrument cluster WARNING Caution for use while driving ■ ● When operating the multi-information display while driving, pay extra attention to the safety of the area around the vehicle. Do not look continuously at the multi-information display while driving as ●...
Page 169: Fuel Consumption Information
2. Instrument cluster  Fuel consumption information The fuel consumption information can be displayed on the navi- gation system or multimedia system screen. Display the trip information or past record screen  Audio system with “INFO” button Press the “INFO” button. Audio system with “MENU”...
Page 170 2. Instrument cluster  Type B Average vehicle speed Cruising range Previous fuel consumption per minute Current fuel consumption Reset the trip information data Elapsed time “Past record” screen appears  Type C Previous fuel consumption per minute Current fuel consumption Reset the trip information data “History”...
Page 171 2. Instrument cluster Past record/History ■ If the past record screen does not appear, select “Past Record” or “History”. Type A  Reset the past record data Best recorded fuel consump- tion Previous fuel consumption record Current fuel consumption Update the past record data “Trip Information”...
Page 172 2. Instrument cluster  Type C Best recorded fuel consump- tion Latest fuel consumption Previous fuel consumption record Reset the past record data Update the latest fuel con- sumption data “Trip Information” screen appears The average fuel consumption history is divided by color into past averages and the average fuel consumption since the last updated.
Page 173 2. Instrument cluster HILUX_OM_OM0K440E_(GE)
Page 174: Operation Of Each Component
Operation of each component 3-1. Key information Keys........174 3-2. Opening, closing and locking the doors Side doors......182 Access panels (smart-cab models only) ....188 Tailgate ......189 Smart entry & start system ......192 3-3. Adjusting the seats Front seats......200 Rear seats ......202 Head restraints ....205 3-4.
Page 175: Keys
3-1. Key information Keys The keys The following keys are provided with the vehicle.  Type A Master keys Valet key Key number plate  Type B Master keys Valet key Key number plate Type C  Master keys Operating the wireless remote con- trol function (P.
Page 176 3-1. Key information  Type D Master keys Operating the wireless remote con- trol function (P. 176) Valet key Key number plate Type E (vehicles with smart entry & start system)  Electronic keys • Operating the smart entry & start system (P.
Page 177 3-1. Key information Wireless remote control (if equipped)  Vehicles without smart entry & start system Locks all the doors (P. 182) Check that the door is securely locked. Unlocks all the doors (P. 182) Sounds the alarm (P. 178) : If equipped ...
Page 178 3-1. Key information Using the master key (type C and D) Releasing To release the key, press the but- ton. Folding To stow the key back in its case, push the key back to the stowed position while pressing the button. Using the mechanical key (vehicles with smart entry &...
Page 179 ■ If you lose your keys New genuine keys can be made by your Toyota dealer using a master key (vehicles without smart entry & start system) or the other key of the same type (vehicles with smart entry & start system), and the key number stamped on your key number plate.
Page 180 ■ Confirmation of the registered key number The number of keys already registered to the vehicle can be confirmed. Ask your Toyota dealer for details. If a wrong key is used (vehicles with double locking system) ■ The key cylinder rotates freely to isolate inside mechanism.
Page 181 3-1. Key information ■ Certification for wireless remote control  For vehicles sold in Singapore  For vehicles sold in Vietnam  For vehicles sold in the United Arab Emirates  For vehicles sold in Jamaica  For vehicles sold in South Africa HILUX_OM_OM0K440E_(GE)
Page 182 When an electronic key is lost (vehicles with smart entry & start sys- tem) If the electronic key remains lost, the risk of vehicle theft increases signifi- cantly. Visit your Toyota dealer immediately with all remaining electronic keys that were provided with your vehicle. HILUX_OM_OM0K440E_(GE)
Page 183: Side Doors
3-2. Opening, closing and locking the doors Side doors The vehicle can be locked and unlocked using the entry func- tion, wireless remote control, key or door lock switch. Locking and unlocking the doors from outside ◆ Smart entry & start system (if equipped) While carrying the electronic key, press the button to lock and unlock.
Page 184 3-2. Opening, closing and locking the doors ◆  Vehicles without smart entry & start system Vehicles without power door lock system: Locks the door Unlocks the door Vehicles with power door lock system: Locks all the doors Unlocks all the doors Vehicles with double locking system: Turning the key rearward unlocks the driver’s door.
Page 185 3-2. Opening, closing and locking the doors ■ Setting the alarm (if equipped) Locking the doors will set the alarm system. (P. 136) If a symbol indicating one or more doors are open is shown on the multi- ■ information display (if equipped) One or more of the doors is not fully closed.
Page 186 3-2. Opening, closing and locking the doors Locking the front doors from the outside without a key Move the inside lock button to the lock position. Close the door while pulling the door handle. Vehicles without smart entry & start system (vehicles with power door lock system): The driver’s door cannot be locked if either of the door is open and the key is in the engine switch.
Page 187 3-2. Opening, closing and locking the doors Automatic door locking and unlocking systems (if equipped) The following functions can be set or canceled: Function Operation All the doors are locked when the vehicle speed is approximately 20 km/h (12 mph) or higher. Speed linked door lock- (Vehicles without impact detection door lock ing function...
Page 188 3-2. Opening, closing and locking the doors ■ Impact detection door lock release system (if equipped) In the event that the vehicle is subject to a strong impact, all the doors are unlocked. Depending on the force of the impact or the type of accident, how- ever, the system may not operate.
Page 189: Access Panels (Smart-Cab Models Only)
3-2. Opening, closing and locking the doors Access panels (smart-cab models only) The access panels (rear door) can be opened using the inside handle. Open the front door widely. Pull (from the outside) or push (from the inside) the inside han- dle of the access panels.
Page 190: Tailgate
3-2. Opening, closing and locking the doors  Tailgate The tailgate can be locked/unlocked and opened by the follow- ing procedures. Locking and unlocking the tailgate (vehicles with key hole) Lock with the master key or the mechanical key Unlock with the master key or the mechanical key Opening the tailgate ...
Page 191 3-2. Opening, closing and locking the doors  Type B Pull the handle and open the tail- gate slowly. The support stays will hold the tail- gate horizontal. After closing the tailgate, try pulling it toward you to make sure it is securely locked.
Page 192 3-2. Opening, closing and locking the doors WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ Caution while driving Do not drive with the tailgate open. ● Do not get on the rear step bumper. ●...
Page 193: Smart Entry & Start System
3-2. Opening, closing and locking the doors  Smart entry & start system The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket. The driver should always carry the electronic key. ●...
Page 194 3-2. Opening, closing and locking the doors ■ Effective range (areas within which the electronic key is detected) When locking or unlocking the doors The system can be operated when the electronic key is within about 0.7 m (2.3 ft.) of either of the lock/unlock button on the outside door handle.
Page 195 3-2. Opening, closing and locking the doors ■ Alarms and warning indicators A combination of exterior and interior alarms as well as warning messages shown on the multi-information display are used to prevent theft of the vehicle and accidents resulting from erroneous operation. Take appropriate mea- sures in response to any warning message on the multi-information display.
Page 196 3-2. Opening, closing and locking the doors ■ Conditions affecting operation The smart entry & start system uses weak radio waves. In the following situa- tions, the communication between the electronic key and the vehicle may be affected, preventing the smart entry & start system, wireless remote control and engine immobilizer system from operating properly.
Page 197 (6 ft.) of the vehicle. The smart entry & start system can be deactivated in advance. Ask your ● Toyota dealer for details. ■ To operate the system properly Make sure to carry the electronic key when operating the system. Do not get the electronic key too close to the vehicle when operating the system from the outside of the vehicle.
Page 198 Retrieve the electronic key from the vehicle and lock the doors again. ■ Customization that can be configured at your Toyota dealer Settings (e.g. smart entry & start system) can be changed. (Customizable features: P. 848) ■...
Page 199 3-2. Opening, closing and locking the doors ■ Certification for smart entry & start system  For vehicles sold in Singapore  For vehicles sold in Vietnam  For vehicles sold in the United Arab Emirates  For vehicles sold in Jamaica ...
Page 200 (P. 192) The radio waves may affect the operation of such devices. If necessary, the entry function can be disabled. Ask your Toyota dealer for details, such as the frequency of radio waves and timing of the emitting radio waves.
Page 201: 3-3. Adjusting The Seats
3-3. Adjusting the seats Front seats Adjustment procedure Manual seat (separated type)  Seat position adjustment lever Seatback angle adjustment lever Vertical height adjustment lever (if equipped for driver’s seat only) Manual seat (bench type)  Seat position adjustment lever (driver’s seat only) Seatback angle...
Page 202 3-3. Adjusting the seats  Power seat (driver’s seat only) Seat position adjustment switch Seatback angle adjustment switch Seat cushion (front) angle adjustment switch Vertical height adjustment switch WARNING ■ When adjusting the seat position Take care when adjusting the seat position to ensure that other passen- ●...
Page 203: Rear Seats
3-3. Adjusting the seats  Rear seats Removing the rear seat cushions (if equipped for smart-cab models) Unhook the lock release lever. Pull the seat cushions up and then pull toward the front of vehicle. The seat cushions can be removed separately.
Page 204 3-3. Adjusting the seats Anchor the strap to the head restraint. Vehicles without the rear center seat head restraint: Anchor the strap to the rear outboard seat head restraint. Raising the bottom cushion (double-cab models with separated type rear seats) Pull the head restraints up.
Page 205 3-3. Adjusting the seats Anchor the straps to the head restraints. WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When removing the rear seat cushions or raising the bottom cushion ● Do not operate the rear seat cushions or bottom cushion while driving.
Page 206: Head Restraints
3-3. Adjusting the seats Head restraints Head restraints are provided for driver’s seat, front passenger’s seat, outboard rear seats and center rear seats (if equipped). Front seats  Adjustable type Pull the head restraints up. Down Push the head restraint down while pressing the lock release button.
Page 207 3-3. Adjusting the seats ■ Removing the head restraints Pull the head restraint up while pressing the lock release button. Lock release button Installing the head restraints ■ Align the head restraint with the installa- tion holes and push it down to the lock position.
Page 208 3-3. Adjusting the seats WARNING Head restraint precautions ■ Observe the following precautions regarding the head restraints. Failure to do so may result in death or serious injury. Use the head restraints designed for each respective seat. ● Adjust the head restraints to the correct position at all times. ●...
Page 209: Steering Wheel
3-4. Adjusting the steering wheel and mirrors Steering wheel Adjustment procedure Hold the steering wheel and push the lever down. Type A  Adjust to the ideal position by moving the steering wheel verti- cally. After adjustment, pull the lever up to secure the steering wheel.
Page 210 3-4. Adjusting the steering wheel and mirrors Horn To sound the horn, press on or close to the mark. After adjusting the steering wheel ■ Make sure that the steering wheel is securely locked. The horn may not sound if the steering wheel is not securely locked. WARNING ■...
Page 211: Inside Rear View Mirror
3-4. Adjusting the steering wheel and mirrors Inside rear view mirror The rear view mirror’s position can be adjusted to enable suffi- cient confirmation of the rear view. Adjusting the height of rear view mirror The height of the rear view mirror can be adjusted to suit your driving posture.
Page 212 3-4. Adjusting the steering wheel and mirrors  Auto anti-glare inside rear view mirror Responding to the level of brightness of the headlights of vehicles behind, the reflected light is automatically reduced. Changing automatic anti-glare function mode ON/OFF When the automatic anti-glare function is in ON mode, the indica- tor illuminates.
Page 213: Outside Rear View Mirrors
3-4. Adjusting the steering wheel and mirrors Outside rear view mirrors Adjustment procedure Manual adjustable type  Adjust a mirror.  Power adjustable type To select a mirror to adjust, turn the switch. Left Right To adjust the mirror, move the switch.
Page 214 3-4. Adjusting the steering wheel and mirrors Folding the mirrors  Manual folding type Push the mirror back in the direc- tion of the vehicle’s rear.  Power folding type Press the switch. Folding Extending ■ Mirror angle can be adjusted when (power adjustable type) ...
Page 215 3-4. Adjusting the steering wheel and mirrors WARNING Important points while driving ■ Observe the following precautions while driving. Failure to do so may result in loss of control of the vehicle and cause an accident, resulting in death or serious injury. Do not adjust the mirrors while driving.
Page 216: Power Windows
3-5. Opening and closing the windows  Power windows Opening and closing procedures The power windows can be opened and closed using the switches. Operating the switch moves the windows as follows: Type A  Closing Opening One-touch opening (driver’s window only) : To stop the window partway, oper- ate the switch in the opposite direc- tion.
Page 217 3-5. Opening and closing the windows  Type C Closing Opening One-touch opening (all windows) One-touch closing (all windows) : To stop the window partway, oper- ate the switch in the opposite direc- tion. Window lock switch Press the switch down to lock the passenger window switches.
Page 218 1 second or more. If you release the switch while the window is moving, start again from the beginning. If the window reverses and cannot be fully closed or opened, have the vehi- cle inspected by your Toyota dealer. HILUX_OM_OM0K440E_(GE)
Page 219 3-5. Opening and closing the windows WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ Closing the windows The driver is responsible for all the power window operations, including the ● operation for the passengers. In order to prevent accidental operation, especially by a child, do not let a child operate the power windows.
Page 220: Quarter Windows (Smart-Cab Models Only)
3-5. Opening and closing the windows Quarter windows (smart-cab models only) Opening and closing procedures The quarter windows can be opened and closed using the latch han- dle. To open the quarter windows, pull the latch handle toward you and swing it fully out.
Page 221: Back Window (Sliding Type)
3-5. Opening and closing the windows Back window (sliding type) Opening and closing procedures The back window can be opened and closed using the lock release lever. To open the back window, push the lock release lever and slide the back window. To close the back window, reverse the opening procedure.
Page 222: Driving
Driving 4-1. Before driving 4-3. Operating the lights and wipers Driving the vehicle .....222 Headlight switch....284 Cargo and luggage ....235 Fog light switch ....292 Trailer towing (without towing hitch)..236 Windshield wipers and washer ......295 Trailer towing (with towing hitch)....237 4-4. Refueling 4-2.
Page 223: Driving The Vehicle
4-1. Before driving Driving the vehicle The following procedures should be observed to ensure safe driving: Starting the engine P. 250, 253 Driving  Automatic transmission With the brake pedal depressed, shift the shift lever to D. (P. 262) Release the parking brake. (P. 283) Gradually release the brake pedal and gently depress the accelera- tor pedal to accelerate the vehicle.
Page 224 4-1. Before driving Stopping  Automatic transmission With the shift lever in D, depress the brake pedal. If necessary, set the parking brake. If the vehicle is to be stopped for an extended period of time, shift the shift lever to P or N. (P. 262) Manual transmission ...
Page 225 4-1. Before driving  Manual transmission While depressing the clutch pedal, depress the brake pedal. Shift the shift lever to N. (P. 270) If parking on a hill, shift the shift lever to 1 or R as needed. Set the parking brake. (P. 283) Vehicles without smart entry &...
Page 226 Vehicles with multi-information display: A warning message is displayed on ● the multi-information display while the system is operating. (P. 754) ■ Breaking in your new Toyota To extend the life of the vehicle, observing the following precautions is recom- mended: ●...
Page 227 Toyota dealer. : EURO VI is an emission standard. If it is not clear that your vehicle meets relevant standards, contact your Toyota dealer. HILUX_OM_OM0K440E_(GE)
Page 228 4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When starting the vehicle On vehicles with automatic transmission, always keep your foot on the brake pedal while stopped with the engine running. This prevents the vehi- cle from creeping.
Page 229 4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When driving the vehicle Use engine braking (downshift) to maintain a safe speed when driving ● down a steep hill. Using the brakes continuously may cause the brakes to overheat and lose effectiveness.
Page 230 ■ If you hear a squealing or scraping noise (brake pad wear indicators) Have the brake pads checked and replaced by your Toyota dealer as soon as possible. Rotor damage may result if the pads are not replaced when needed.
Page 231 4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When the vehicle is stopped Do not race the engine. ● If the vehicle is in any gear other than P (vehicles with automatic transmis- sion only) or N, the vehicle may accelerate suddenly and unexpectedly, causing an accident.
Page 232 4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When the vehicle is parked Always apply the parking brake, shift the shift lever to P (vehicles with ● automatic transmission only), stop the engine and lock the vehicle. Do not leave the vehicle unattended while the engine is running.
Page 233 Failure to do so may cause excessive pre- mature wear or damage to the clutch, eventually making it difficult to accel- erate and start off from a stop. Have the vehicle inspected by your Toyota dealer.
Page 234 4-1. Before driving NOTICE When parking the vehicle ■ On vehicles with automatic transmission, always set the parking brake, and shift the shift lever to P. Failure to do so may cause the vehicle to move or the vehicle may accelerate suddenly if the accelerator pedal is accidentally depressed.
Page 235 ● Engine damage caused by water immersion In the event that you drive on a flooded road and the vehicle is flooded, or on a sandy road, be sure to have your Toyota dealer check the following: ● Brake function Changes in quantity and quality of oil and fluid used for the engine, trans- ●...
Page 236: Cargo And Luggage
4-1. Before driving Cargo and luggage Take notice of the following information about storage precau- tions, cargo capacity and load. WARNING ■ Things that must not be carried in the rear deck The following things may cause a fire if loaded in the rear deck: ●...
Page 237: Trailer Towing (Without Towing Hitch)
(P. 804) Toyota does not recommend towing a trailer with your vehicle. Toyota also does not recommend the installation of a tow hitch or the use of a tow hitch carrier for a wheelchair, scooter, bicy- cle, etc. Your vehicle is not designed for trailer towing or for the use of tow hitch mounted carriers.
Page 238: Trailer Towing (With Towing Hitch)
MPAC (Maximum Permissible Axle Capacity), and permissible drawbar load before towing. (P. 799) ◆ Towing hitch/bracket Toyota recommends the use of the Toyota hitch/bracket for your vehicle. Other products of a suitable nature and comparable quality may also be used. HILUX_OM_OM0K440E_(GE)
Page 239 4-1. Before driving Guidance Your vehicle will handle differently when towing a trailer. In order to avoid accident, death or serious injury, keep the following in mind when towing: Checking connections between trailer and lights ■ Stop the vehicle and check the operation of the connection between the trailer and lights after driving for a brief period as well as before starting off.
Page 240 4-1. Before driving Important points regarding turning ■ The wheels of the trailer will travel closer to the inside of the curve than the wheels of the vehicle. To make allowance for this, take the turns wider than you would normally do. Important points regarding stability ■...
Page 241 4-1. Before driving If the engine overheats ■ Towing a loaded trailer up a long, steep incline in temperatures exceeding 30C (85F) may result in the engine overheating. If the engine coolant temperature gauge indicates that the engine is over- heating, turn the air conditioning off immediately, leave the road and stop the vehicle in a safe place.
Page 242 4-1. Before driving WARNING To avoid accident or injury ■ The gross combination mass (sum of your vehicle mass plus its load and the total trailer mass) must not exceed the following:  For South Africa Single-cab models: 5280 kg (11640 lb.)[2GD-FTV engine, 2WD models] 5850 kg (12897 lb.)[4WD models] Smart-cab models: 5850 kg (12897 lb.)[4WD models] Double-cab models: 5530 kg (12192 lb.)[2GD-FTV engine, Pre Runner...
Page 243 4-1. Before driving Important points regarding trailer loads (except 4WD models with 1GD engine and GUN125L-BGFXHG model Total trailer weight and permissible drawbar load ■ Total trailer weight Weight of the trailer itself plus the trailer load should be within the maximum towing capacity.
Page 244 4-1. Before driving Information tag (manufacturer’s label) (for South Africa) ■ Gross vehicle mass Maximum permissible rear axle capacity  Type A  Type B HILUX_OM_OM0K440E_(GE)
Page 245 Break-in schedule ■ Toyota recommends that vehicles fitted with new power train components should not be used for towing trailers for the first 800 km (500 miles). ■ Safety checks before towing Check that the maximum load limit for the towing hitch/bracket hitch ball is ●...
Page 246 4-1. Before driving ■ If trailer sway occurs (vehicles with Trailer Sway Control) One or more factors (crosswinds, passing vehicles, rough roads, etc.) can adversely affect handling of your vehicle and trailer, causing instability. If trailer swaying occurs: ● • Firmly grip the steering wheel. Steer straight ahead. Do not try to control trailer swaying by turning the steering wheel.
Page 247 4-1. Before driving Important points regarding trailer loads (4WD models with 1GD engine and GUN125L-BGFXHG model Total trailer weight and permissible drawbar load ■ Total trailer weight Weight of the trailer itself plus the trailer load should be within the maximum towing capacity. Exceeding this weight is danger- ous.
Page 248 4-1. Before driving Information tag (manufacturer’s label) (for South Africa) ■ Gross vehicle mass Maximum permissible rear axle capacity  Type A  Type B WARNING When the total trailer weight exceeds 3200kg (7055 lb.) ■ Do not exceed the legal speed limit for towing a trailer or 90 km/h (56 mph), whichever is lower.
Page 249 Break-in schedule ■ Toyota recommends that vehicles fitted with new power train components should not be used for towing trailers for the first 800 km (500 miles). ■ Safety checks before towing Check that the maximum load limit for the towing hitch/bracket hitch ball is ●...
Page 250 4-1. Before driving ■ If trailer sway occurs (vehicles with Trailer Sway Control) One or more factors (crosswinds, passing vehicles, rough roads, etc.) can adversely affect handling of your vehicle and trailer, causing instability. If trailer swaying occurs: ● • Firmly grip the steering wheel. Steer straight ahead. Do not try to control trailer swaying by turning the steering wheel.
Page 251: Engine (Ignition) Switch (Vehicles Without
4-2. Driving procedures Engine (ignition) switch (vehicles without smart entry & start system) Starting the engine  Automatic transmission (gasoline engine) Check that the parking brake is set. Check that the shift lever is set in P. Firmly depress the brake pedal. Turn the engine switch to the “START”...
Page 252 ■ If the engine does not start (vehicles with engine immobilizer system) The engine immobilizer system may not have been deactivated. (P. 130) Contact your Toyota dealer. ■ When the steering lock cannot be released When starting the engine, the engine switch may seem stuck in the “LOCK”...
Page 253 Do not crank the engine for more than 30 seconds at a time. This may overheat the starter and wiring system. Do not race a cold engine. ● ● If the engine becomes difficult to start or stalls frequently, have your vehi- cle checked by your Toyota dealer immediately. HILUX_OM_OM0K440E_(GE)
Page 254: Engine (Ignition) Switch (Vehicles With Smart Entry & Start System)
4-2. Driving procedures Engine (ignition) switch (vehicles with smart entry & start system) Performing the following operations when carrying the elec- tronic key on your person starts the engine or changes engine switch modes. Starting the engine  Automatic transmission Check that the parking brake is set.
Page 255 4-2. Driving procedures  Manual transmission Check that the parking brake is set. Check that the shift lever is set in N. Firmly depress the clutch pedal. A message will be displayed on the multi-information display. If it is not displayed, the engine cannot be started.
Page 256 4-2. Driving procedures Stopping the engine  Automatic transmission Stop the vehicle. Set the parking brake ( P. 283 ), and shift the shift lever to P. Press the engine switch. Release the brake pedal and check that the display on the instru- ment cluster is off.
Page 257 4-2. Driving procedures Changing engine switch modes Modes can be changed by pressing the engine switch with brake pedal (vehicles with automatic transmission) or clutch pedal (vehicles with manual transmission) released. (The mode changes each time the switch is pressed.) The emergency flashers can be used.
Page 258 4-2. Driving procedures When stopping the engine with the shift lever in a position other than P (vehicles with automatic transmission) If the engine is stopped with the shift lever in a position other than P, the engine switch will not be turned off but instead be turned to ACCESSORY mode.
Page 259 Electronic key battery depletion P. 197 Conditions affecting operation ■ P. 195 Note for the entry function ■ P. 196 ■ If the engine does not start The engine immobilizer system may not have been deactivated. (P. 130) Contact your Toyota dealer. HILUX_OM_OM0K440E_(GE)
Page 260 MANUAL”/“Smart Entry & Start System malfunction See owner’s man- ual” is shown on the multi-information display (if equipped) The system may be malfunctioning. Have the vehicle inspected by your Toyota dealer immediately. ■ If the electronic key battery is depleted P.
Page 261 4-2. Driving procedures WARNING When starting the engine ■ Always start the engine while sitting in the driver’s seat. Do not depress the accelerator pedal while starting the engine under any circumstances. Doing so may cause an accident resulting in death or serious injury. Caution while driving ■...
Page 262 Do not race a cold engine. ● If the engine becomes difficult to start or stalls frequently, have your vehi- cle checked by your Toyota dealer immediately. ■ Symptoms indicating a malfunction with the engine switch If the engine switch seems to be operating somewhat differently than usual, such as the switch sticking slightly, there may be a malfunction.
Page 263: Automatic Transmission
4-2. Driving procedures  Automatic transmission Select a shift position appropriate for the driving conditions. Shifting the shift lever  Vehicles without smart entry & start system While the engine switch is in the “ON” position, move the shift lever with the brake pedal depressed. When shifting the shift lever between P and D, make sure that the vehicle is completely stopped.
Page 264 4-2. Driving procedures Shift position purpose Shift position Function Parking the vehicle/starting the engine Reversing Neutral (Condition in which the power is not transmitted) Normal driving S mode driving (P. 265) : To improve fuel efficiency and reduce noises, set the shift lever in the D position for normal driving.
Page 265 4-2. Driving procedures Selecting the driving mode (if equipped) The following modes can be selected to suit driving conditions. Eco drive mode ■ Use Eco drive mode to help achieve low fuel consumption during trips that involve frequent accelerating. Press the “ECO MODE” switch to select Eco drive mode.
Page 266 4-2. Driving procedures Selecting shift ranges in the S position To enter S mode, shift the shift lever to S. Shift ranges can be selected by operating the shift lever, allowing you to drive in the shift range of your choosing. The shift range can be selected by the shift lever. Upshifting Downshifting The selected shift range, from 1 to...
Page 267 4-2. Driving procedures ■ S mode When the shift range is 4 or lower, holding the shift lever toward “+” sets the shift range to 6. ■ Downshifting restrictions warning buzzer To help ensure safety and driving performance, downshifting operation may sometimes be restricted.
Page 268 If the shift lever cannot be shifted with your foot on the brake pedal, there may be a problem with the shift lock system. Have the vehicle inspected by your Toyota dealer immediately. The following steps may be used as an emergency measure to ensure that the shift lever can be shifted.
Page 269 If the “S” indicator does not come on or the “D” indicator is displayed even after shifting the shift lever to S This may indicate a malfunction in the automatic transmission system. Have the vehicle inspected by your Toyota dealer immediately. ■ Transmission protection function...
Page 270 4-2. Driving procedures ■ AI-SHIFT The AI-SHIFT automatically selects the suitable gear according to driver per- formance and driving conditions. The AI-SHIFT automatically operates when the shift lever is in D. (Shifting the shift lever to S cancels the function.) WARNING When driving on slippery road surfaces ■...
Page 271: Manual Transmission
4-2. Driving procedures  Manual transmission Shifting the shift lever 5-speed transmission  Depress the clutch pedal firmly. Shift the shift lever slowly and securely. Make sure to only shift gears sequentially. Gradually release the clutch pedal. If it is difficult to shift in R, shift the shift lever to N, release the clutch pedal momentarily, and then try again.
Page 272 4-2. Driving procedures Selecting the driving mode (if equipped) The following modes can be selected to suit driving conditions. Eco drive mode ■ Use Eco drive mode to help achieve low fuel consumption during trips that involve frequent accelerating. Press the “ECO MODE” switch to select Eco drive mode.
Page 273 4-2. Driving procedures iMT (Intelligent Manual Transmission) (if equipped) iMT detects clutch pedal and shift lever operations performed by the driver. When the shift position is changed, iMT judges the optimal engine speed and performs the appropriate control to help the driver to change the shift position smoothly.
Page 274 4-2. Driving procedures ■ Maximum downshifting speeds Observe the downshifting speeds in the following table to prevent over-rev- ving the engine.  5-speed transmission 2WD models: km/h (mph) Maximum speed Shift position 205/70R15C 37 (22) 69 (42) 112 (69) 161 (100) tires 1TR-FE engine...
Page 275 4-2. Driving procedures 4WD models (front-wheel drive control switch in H2 or H4): km/h (mph) Maximum speed Shift position 205R16C 39 (24) 73 (45) 118 (73) 170 (105) tires 37 (22) 69 (42) 112 (69) 160 (99) 2TR-FE 225/70R17C 38 (23) 71 (44) 114 (70) 164 (101)
Page 276 4-2. Driving procedures 4WD models (front-wheel drive control switch in L4): km/h (mph) Maximum speed Shift position 205R16C 28 (17) 46 (28) 66 (41) 15 (9) tires 27 (16) 44 (27) 63 (39) 2TR-FE 225/70R17C 15 (9) 28 (17) 45 (27) 64 (39) engine tires...
Page 277 4-2. Driving procedures  6-speed transmission 2WD models: km/h (mph) Maximum speed Shift position 205/70R15C tires 31 (19) 62 (38) 104 (64) 150 (93) 175 (108) Diesel engine 215/65R16C tires 32 (19) 63 (39) 106 (65) 153 (95) 175 (108) 4WD models (front-wheel drive control switch in H2 or H4): km/h (mph) Maximum speed...
Page 278 4-2. Driving procedures 4WD models (front-wheel drive control switch in L4): km/h (mph) Maximum speed Shift position 205R16C tires 13 (8) 26 (16) 44 (27) 64 (39) 82 (50) 225/70R17C 14 (8) 27 (16) 45 (27) 65 (40) 84 (52) tires 2GD-FTV 265/60R18...
Page 279 4-2. Driving procedures Pre Runner (Raised Body): km/h (mph) Maximum speed Shift position 205R16C tires 34 (21) 67 (41) (70) (101) (108) 225/70R17C 35 (21) 69 (42) tires (72) (103) (108) 2GD-FTV engine 265/60R18 36 (22) 70 (43) tires (73) (106) (108) 265/65R17...
Page 280 ● The clutch pedal is not fully depressed. If the warning message for iMT is shown on the multi-information dis- ■ play iMT may be malfunctioning and the function is disabled. Have the vehicle inspected at your Toyota dealer. HILUX_OM_OM0K440E_(GE)
Page 281 4-2. Driving procedures WARNING Limitations of the iMT ■ iMT is not a system that prevents shift lever operation error or engine over- revving. Depending on the situation, iMT may not operate normally and the shift position may not be changed smoothly. Overly relying on iMT may cause an unexpected accident.
Page 282: Turn Signal Lever
4-2. Driving procedures Turn signal lever Operating instructions Left-hand drive vehicles  Right turn Left turn Lane change to the right (move the lever partway and release The right hand signals will flash 3 times. Lane change to the left (move the lever partway and release The left hand signals will flash 3 times.
Page 283 4-2. Driving procedures ■ Turn signals can be operated when  Vehicles without smart entry & start system The engine switch is in the “ON” position.  Vehicles with smart entry & start system The engine switch is in IGNITION ON mode. ■...
Page 284: Parking Brake
4-2. Driving procedures Parking brake Sets the parking brake Fully pull the parking brake while depressing the brake pedal. At this time, the parking brake indi- cator light will come on. Releases the parking brake Slightly raise the lever and lower it completely while pressing the but- ton.
Page 285: Headlight Switch
4-3. Operating the lights and wipers Headlight switch The headlights can be operated manually or automatically. Operating instructions Operating the switch turns on the lights as follows:  Type A The headlights, front position, tail, license plate, instrument panel and daytime running lights equipped) (P.
Page 286 4-3. Operating the lights and wipers  Type B Vehicles without day- time running light sys- tem: Off. Vehicles with daytime running light system: The daytime running lights turn on. (P. 288) The headlights, front (if equipped) position, tail, license plate, instrument panel and daytime running lights...
Page 287 4-3. Operating the lights and wipers Turning on the high beam headlights With the headlights on, push the lever away from you to turn on the high beams. Pull the lever toward you to the center position to turn the high beams off.
Page 288 (P. 291) : Vehicles with Heavy Duty Suspension. : Vehicles without Heavy Duty Suspension. : Contact your Toyota dealer, if you are not sure of which specifications your vehicle is equipped with. HILUX_OM_OM0K440E_(GE)
Page 289 4-3. Operating the lights and wipers Follow me home system (if equipped) This system allows the headlights and front position lights to be turned on for 30 seconds when the engine switch is turned to the “LOCK” position (vehicles without smart entry & start system) or off (vehicles with smart entry &...
Page 290 4-3. Operating the lights and wipers ■ Automatic light off system (if equipped)  Except for Morocco and Egypt, and except models for African countries and Algeria The lights turn off after the engine switch is turned to the “LOCK” position (vehicles without smart entry &...
Page 291 4-3. Operating the lights and wipers ■ Light reminder buzzer (if equipped)  Vehicles without smart entry & start system A buzzer sounds when the engine switch is turned to the “LOCK” position, the key is removed and the driver’s door is opened while the lights are turned on. ...
Page 292 4-3. Operating the lights and wipers ■ Headlight manufacturer information (models made in Argentina with manual headlight leveling dial) The information is on the headlight units. : See “Checking your vehicle’s model” if you are not sure of which model your vehicle is.
Page 293: Fog Light Switch
4-3. Operating the lights and wipers  Fog light switch The fog lights secure excellent visibility in difficult driving con- ditions, such as in rain and fog. Front fog light switch (if equipped) ■ Turns the front fog lights Turns the front fog lights ...
Page 294 4-3. Operating the lights and wipers Rear fog light switch (if equipped) ■ Turns the rear fog light on Releasing switch ring returns it to Operating the switch ring again turns the rear fog light off. Front and rear fog light switch (if equipped) ■...
Page 295 4-3. Operating the lights and wipers ■ Fog lights can be used when  Vehicles with front and rear fog lights Front fog lights: The headlights or front position lights are turned on. Rear fog light: The front fog lights are turned on. ...
Page 296: Windshield Wipers And Washer
4-3. Operating the lights and wipers Windshield wipers and washer Operating the wiper lever Operating the lever operates the wipers or washer as follows. Windshield wipers without intermittent operation ■ Low speed operation High speed operation Temporary operation Washer operation Pulling the lever operates the washer.
Page 297 4-3. Operating the lights and wipers Windshield wipers with intermittent operation ■ Intermittent operation Low speed operation High speed operation Temporary operation If equipped, wiper intervals can be adjusted when intermittent oper- ation is selected. Increases intermittent windshield wiper frequency Decreases the intermittent windshield wiper frequency HILUX_OM_OM0K440E_(GE)
Page 298 Do not operate the switch continually as the washer fluid pump may over- heat. When a nozzle becomes blocked ■ In this case, contact your Toyota dealer. Do not try to clear it with a pin or other object. The nozzle will be damaged. HILUX_OM_OM0K440E_(GE)
Page 299: Cap
4-4. Refueling Opening the fuel tank cap Perform the following steps to open the fuel tank cap: Before refueling the vehicle ● Vehicles without smart entry & start system Turn the engine switch to the “LOCK” position and ensure that all the doors and windows are closed.
Page 300 4-4. Refueling WARNING When refueling the vehicle ■ Observe the following precautions while refueling the vehicle. Failure to do so may result in death or serious injury. After exiting the vehicle and before opening the fuel cap, touch an ● unpainted metal surface to discharge any static electricity.
Page 301: Refueling
4-4. Refueling NOTICE Refueling ■ ● Do not spill fuel during refueling. Doing so may damage the vehicle, such as causing the emission control system to operate abnormally or damaging fuel system components or the vehicle’s painted surface. Vehicles with DPF system: Use the specified fuel. If fuel other than the ●...
Page 302 4-4. Refueling Type B ■ To unlock the fuel tank cap, insert the key and turn it counterclockwise. Turn the fuel tank cap slowly to open. Make sure not to hold and turn the key. Closing the fuel tank cap Type A ■...
Page 303 WARNING ■ When replacing the fuel tank cap Do not use anything but a genuine Toyota fuel tank cap designed for your vehicle. Doing so may cause a fire or other incident which may result in death or serious injury.
Page 304: Using The Driving Support
4-5. Using the driving support systems  Cruise control Summary of functions Use the cruise control to maintain a set speed without depressing the accelerator pedal. Indicators Cruise control switch Setting the vehicle speed Press the “ON-OFF” button to activate the cruise control. Cruise control indicator will come Press the button again to deacti- vate the cruise control.
Page 305 4-5. Using the driving support systems Adjusting the set speed To change the set speed, operate the lever until the desired set speed is obtained. Increases the speed Decreases the speed Fine adjustment: Momentarily move the lever in the desired direc- tion.
Page 306 If the cruise control speed cannot be set or if the cruise control cancels imme- diately after being activated, there may be a malfunction in the cruise control system. Have the vehicle inspected by your Toyota dealer. HILUX_OM_OM0K440E_(GE)
Page 307 4-5. Using the driving support systems WARNING To avoid operating the cruise control by mistake ■ Switch the cruise control off using the “ON-OFF” button when not in use. ■ Situations unsuitable for cruise control Do not use cruise control in any of the following situations. Doing so may result in loss of control and could cause an accident resulting in death or serious injury.
Page 308: Rear View Monitor System
4-5. Using the driving support systems  Rear view monitor system The rear view monitor system assists the driver by displaying an image of the view behind the vehicle with fixed guide lines while backing up, for example while parking. The screen illustrations used in this text are intended as examples, and may differ from the image that is actually displayed on the screen.
Page 309 4-5. Using the driving support systems Using the rear view monitor system Screen description ■  Vehicles without smart entry & start system The rear view monitor system screen will be displayed if the shift lever is shifted to R while the engine switch is in the “ON” position. Vehicles with smart entry &...
Page 310 4-5. Using the driving support systems Rear view monitor system precautions Area displayed on screen ■ The rear view monitor system displays an image of the view from the bumper of the rear area of the vehicle. The image on the rear view monitor system screen can be adjusted: P.
Page 311 4-5. Using the driving support systems Rear view monitor system camera ■ The camera for the rear view monitor system is located on the tail- gate. Type A Type B   ● Using the camera If dirt or foreign matter (such as water droplets, snow, mud etc.) is adhering to the camera, it cannot transmit a clear image.
Page 312 4-5. Using the driving support systems ● When the ground behind the vehicle slopes up sharply The distance guide lines will appear to be closer to the vehicle than the actual dis- tance. Because this, objects will appear to be fur- ther away than they actually are.
Page 313 4-5. Using the driving support systems ● When any part of the vehicle sags When any part of the vehicle sags due to the number of passengers or the distribu- tion of the load, there is a margin of error between the fixed guide lines on the screen and the actual dis- A margin of error...
Page 314 4-5. Using the driving support systems ● Distance guide lines Visually check the surround- ings and the area behind the vehicle. On the screen, it appears that a truck is park- ing at point . However, in reality if you back up to point , you will hit the truck.
Page 315 If you notice any of the following symptoms, refer to the likely cause and the solution, and re-check. If the symptom is not resolved by the solution, have the vehicle inspected by your Toyota dealer. Likely cause Solution  The image is difficult to see •...
Page 316 The camera or surrounding area has Have the vehicle inspected by your received a strong impact. Toyota dealer.  The fixed guide lines are very far out of alignment The camera position is out of align- Have the vehicle inspected by your ment.
Page 317 Do not expose the camera to strong impact as this could cause a malfunc- ● tion. If this happens, have the vehicle inspected by your Toyota dealer as soon as possible. HILUX_OM_OM0K440E_(GE)
Page 318: Four-Wheel Drive System
4-5. Using the driving support systems  Four-wheel drive system Use the front-wheel drive control switch to select the following transfer modes. H2 (high speed position, two- wheel drive) Use this for normal driving on dry hard - surfaced roads. This position gives greater economy, quietest ride and least wear.
Page 319 4-5. Using the driving support systems Shifting between H2 and H4 Shifting from H2 to H4 ■ Reduce the vehicle speed to 100 km/h less than 100 km/h (62 mph). (62 mph) The transfer mode cannot be switched if the vehicle speed is more than 100 km/h (62 mph).
Page 320 4-5. Using the driving support systems Shifting from H4 to H2 ■ Turn the front-wheel drive control switch to H2. The four-wheel drive indicator (Flashes) light flashes while switching. Check that the four-wheel drive indicator light goes off. The four-wheel drive indicator (Goes off) light goes off when switching the transfer mode is completed.
Page 321 4-5. Using the driving support systems Shifting between H4 and L4 (automatic transmission) Shifting from H4 to L4 ■ Stop the vehicle. The transfer mode cannot be switched if the vehicle is mov- ing. 0 km/h (0 mph) Shift the shift lever to N. Keep the shift lever in N until switching the transfer mode is completed (indicator on).
Page 322 4-5. Using the driving support systems Check that the low speed four-wheel drive indicator light comes on. The low speed four-wheel drive indicator light comes on when switching the transfer mode is completed. Shift the shift lever from N to D or R to drive the vehicle.
Page 323 4-5. Using the driving support systems Turn the front-wheel drive control switch to H4. The low speed four-wheel drive (Flashes) indicator light flashes while switching. If turning the front-wheel drive control switch without following steps , the low speed four-wheel drive indicator light flashes and a buzzer sounds.
Page 324 4-5. Using the driving support systems Shifting between H4 and L4 (manual transmission) Shifting from H4 to L4 ■ Stop the vehicle. The transfer mode cannot be switched if the vehicle is mov- ing. 0 km/h (0 mph) Firmly depress the clutch pedal.
Page 325 4-5. Using the driving support systems Check that the low speed four-wheel drive indicator light comes on. (Comes on) The low speed four-wheel drive indicator light comes on when switching the transfer mode is completed. Release the clutch pedal to drive the vehicle.
Page 326 4-5. Using the driving support systems Turn the front-wheel drive control switch to H4. The low speed four-wheel drive (Flashes) indicator light flashes while switching. If turning the front-wheel drive control switch without following steps , the low speed four-wheel drive indicator light flashes and a buzzer sounds.
Page 327 4-5. Using the driving support systems ■ Four-wheel drive usage frequency (vehicles with A.D.D.) You should drive in four-wheel drive for at least 16 km (10 miles) each month. This will assure that the front drive components are lubricated. ■ Shifting between H2 and H4 If you have trouble shifting in cold weather, reduce your speed or stop the vehicle and reshift.
Page 328: Rear Differential Lock System
4-5. Using the driving support systems  Rear differential lock system The rear differential lock system is provided for use only when wheel spinning occurs in a ditch or on a slippery or ragged sur- face. This differential lock system is effective in case one of the rear wheels is spinning.
Page 329 4-5. Using the driving support systems Using the rear differential lock system 4WD models only: Before using the rear differential lock system, turn the front-wheel drive con- trol switch to L4 and try to move the vehicle. (P. 320, 323) If this is not sufficient, use the rear differential lock system as well.
Page 330 4-5. Using the driving support systems Gently depress the accelerator pedal. Check that the rear differential lock indicator comes on. The rear differential lock indicator (Comes on) comes on when locking the rear differential is completed. If the rear differential lock indicator does not stop flashing after press- ing the rear differential lock switch, perform any of the followings while...
Page 331 4-5. Using the driving support systems ■ Locking the rear differential The following systems do not operate when the rear differential is locked. It is normal operation for the ABS warning light, VSC OFF indicator (if equipped) and “TRC OFF” indicator (if equipped) to be on or for “TRC TURNED OFF”/“TRC turned off”...
Page 332: Stop & Start System (Smart Stop)
4-5. Using the driving support systems  Stop & Start system (Smart Stop) The Stop & Start system stops and restarts the engine according to the brake pedal operation for stopping and starting the vehi- cle. Stop & Start system operation Stopping the engine ■...
Page 333 4-5. Using the driving support systems Disabling the Stop & Start system Press the Stop & Start cancel switch to disable the Stop & Start system. The Stop & Start cancel indicator will come on. Pressing the switch again will enable the Stop &...
Page 334 4-5. Using the driving support systems ■ Operating conditions ● The Stop & Start system is operational when all of the following conditions are met: • The brake pedal is being depressed firmly • The engine is adequately warmed up. •...
Page 335 4-5. Using the driving support systems ● In the following situations, the engine will automatically restart if the engine is stopped by the Stop & Start system. (To enable stopping the engine by Stop & Start system, drive the vehicle.) •...
Page 336 Installation and removal of electrical components and wireless devices may ● affect the Stop & Start system. Contact your Toyota dealer for details. ■ If the windshield is fogged up while the engine is stopped by the Stop &...
Page 337 4-5. Using the driving support systems ■ The Stop & Start system protection function When an excessively loud sound is being projected by the audio system, ● the audio system may be automatically cut off in order to reduce battery consumption.
Page 338 & start system) or off (vehicles with smart entry & start sys- tem), wait 30 seconds or more, and then start the engine. If the message is displayed continuously (60 minutes or more), the battery may have deteriorated. Contact your Toyota dealer. HILUX_OM_OM0K440E_(GE)
Page 339 “Non-dedicated  The Stop & Start system does not battery” operate. Have the vehicle inspected by your Toyota dealer. When the engine automatically restarts while stopped by the Stop & Start ● system Message Details/Actions •...
Page 340 To ensure the system operates correctly If any of the following situations occur, the Stop & Start system may not operate correctly. Have your vehicle inspected by your Toyota dealer. ● While the driver’s seat belt is fastened, the driver’s and front passenger’s seat belt reminder light flashes.
Page 341: Driving Assist Systems
4-5. Using the driving support systems Driving assist systems To keep driving safety and performance, the following systems operate automatically in response to various driving situations. Be aware, however, that these systems are supplementary and should not be relied upon too heavily when operating the vehi- cle.
Page 342 4-5. Using the driving support systems ◆ Emergency brake signal (if equipped) When the brakes are applied suddenly, the emergency flashers automati- cally flash to alert the vehicle behind. ◆ Trailer Sway Control (if equipped) Helps the driver to control trailer sway by selectively applying brake pres- sure for individual wheels and reducing driving torque when trailer sway is detected.
Page 343 4-5. Using the driving support systems Disabling the TRC/A-TRC systems If the vehicle gets stuck in mud, dirt or snow, the TRC/A-TRC systems may reduce power from the engine to the wheels. Pressing turn the system off may make it easier for you to rock the vehicle in order to free it.
Page 344 TRC, A-TRC and downhill assist control is temporary deactivated. If the indi- cator light continues to remain on or the information continues to show, con- tact your Toyota dealer. ■ Sounds and vibrations caused by the ABS, brake assist, VSC, Trailer Sway Control, TRC, A-TRC and the hill-start assist control systems ●...
Page 345 4-5. Using the driving support systems ■ Automatic reactivation of TRC, A-TRC, VSC and Trailer Sway Control systems After turning the TRC, A-TRC, VSC and Trailer Sway Control systems off, the systems will be automatically re-enabled in the following situations: ●...
Page 346 4-5. Using the driving support systems ■ Operating conditions of emergency brake signal When the following conditions are met, the emergency brake signal will oper- ate: The emergency flashers are off. ● ● Actual vehicle speed is over 55 km/h (35 mph). The system judges from the vehicle deceleration that it is a sudden braking ●...
Page 347 The ABS, TRC, A-TRC, VSC, Trailer Sway Control, hill-start assist control and downhill assist control systems will not function correctly if different tires are installed on the vehicle. Contact your Toyota dealer for further information when replacing tires or wheels. Handling of tires and the suspension ■...
Page 348 4-5. Using the driving support systems WARNING Trailer Sway Control precaution ■ The Trailer Sway Control system is not able to reduce trailer sway in all situ- ations. Depending on many factors such as the conditions of the vehicle, trailer, road surface, and driving environment, the Trailer Sway Control sys- tem may not be effective.
Page 349: Downhill Assist Control System
4-5. Using the driving support systems  Downhill assist control system The downhill assist control system helps to prevent excessive speed on steep downhill slopes. The system will operate when the vehicle is traveling under 30 km/h (18 mph) and transfer mode is in L4 or H4. System operation Press the “DAC”...
Page 350 4-5. Using the driving support systems ■ Operating tips (vehicles with automatic transmission) The system will operate when the shift lever is in a position other than P, how- ever to make effective use of the system it is recommended to select a lower shift range.
Page 351 4-5. Using the driving support systems ■ System malfunction In the following cases, have your vehicle checked by your Toyota dealer. The downhill assist control system indicator does not come on when the ● engine switch is turned to the “ON” position (vehicles without smart entry &...
Page 352: Dpf (Diesel Particulate Filter) System
4-5. Using the driving support systems  DPF (Diesel Particulate Filter) system When the deposit collected by the filter reaches a predetermined amount, it is automatically regenerated. ◆ Regeneration Regeneration is performed as necessary in accordance with driving conditions. ◆ System characteristics The DPF system has the following characteristics: ●...
Page 353 4-5. Using the driving support systems Press the DPF system switch. Vehicles without multi-information display  The DPF system warning light will change from solid to slow flash- ing, and the idling engine speed will increase. Vehicles with multi-information display ...
Page 354 “DPF FULL VISIT YOUR DEALER”/“DPF full Visit your dealer” appears on the display (vehicles with multi-information display), the malfunction indicator lamp comes on, have the vehicle inspected by your Toyota dealer immediately. ■ Regeneration with the DPF system switch After pressing the DPF system switch, depressing the accelerator pedal or ●...
Page 355 DPF system warning message appears on the display (vehicles with multi-information display). In this event, damage may be caused to the vehicle or an accident may occur. Have the vehicle inspected by your Toyota dealer immediately. HILUX_OM_OM0K440E_(GE)
Page 356 4-5. Using the driving support systems NOTICE To prevent the DPF system from failing ■ ● Do not drive for long periods of time while the DPF system warning light is flashing (vehicles without multi-information display) or the DPF system warning message “DPF FULL VISIT YOUR DEALER”/“DPF full Visit your dealer”...
Page 357: 4-6. Driving Tips
4-6. Driving tips Winter driving tips Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a man- ner appropriate to the prevailing weather conditions. Preparation for winter ● Use fluids that are appropriate to the prevailing outside tempera- tures.
Page 358 If the shift lever can be shifted from P, there may be a problem with the shift lock system. Have the vehicle inspected by your Toyota dealer immediately. Selecting tire chains Use the correct tire chain size when mounting the snow chains.
Page 359 Repairing or replacing snow tires (vehicles with tire pressure warning ■ system) Request repairs or replacement of snow tires from Toyota dealers or legiti- mate tire retailers. This is because the removal and attachment of snow tires affects the opera- tion of the tire pressure warning valves and transmitters.
Page 360: Eco-Friendly Driving Tips
4-6. Driving tips Eco-friendly driving tips For improved fuel economy and reduced CO emissions, pay attention to the following points: ◆ Using Eco drive mode (if equipped) When using Eco drive mode, the torque corresponding to the accel- erator pedal depression amount can be generated more smoothly than it is in normal conditions.
Page 361 4-6. Driving tips ◆ Highway driving Control and maintain the vehicle at a constant speed. Before stop- ping at a toll booth or similar, allow plenty of time to release the accelerator pedal and gently apply the brakes. ◆ Air conditioning Use the air conditioning only when necessary.
Page 362 4-6. Driving tips ◆ Luggage Carrying heavy luggage will lead to poor fuel economy. Avoid carry- ing unnecessary luggage. Installing a large roof rack will also cause poor fuel economy. ◆ Regular maintenance ● Make sure to check the tire inflation pressure frequently. Improper tire inflation pressure can cause poor fuel economy.
Page 363 ® 5-1. Basic Operations 5-9. Bluetooth Phone Audio system types ...364 Making a phone call...425 Steering wheel audio Receiving a phone call..427 switches......367 Speaking on the phone..428 AUX port/USB port ....370 ® 5-10. Bluetooth ® 5-2. Using the audio system Bluetooth ......430 Optimal use of the audio...
Page 364: Audio System
Audio system ® 5-15. Using the radio 5-21. Bluetooth Audio ® Radio operation ....490 Listening to Bluetooth audio........541 5-16. Playing an audio CD and ® MP3/WMA/AAC discs 5-22. Bluetooth Phone ® CD player operation...495 Using a Bluetooth Phone ......543 5-17. Playing video CD Making a call......545 Video CD player Receiving a call....550...
Page 365: 5-1. Basic Operations
5-1. Basic Operations  Audio system types  Vehicles with navigation system or multimedia system for TGN126L-DTTMK Refer to the “Navigation System Owner’s Manual” or “Navigation and Multimedia System Owner’s Manual”.  Vehicles with multimedia system (with 8-inch display) Refer to the “Navigation and Multimedia System Owner’s Manual”. ...
Page 366 5-1. Basic Operations  Vehicles without navigation system or multimedia system CD player with AM/FM radio ● Type A ● Type B This illustration is for a left-hand drive vehicle. Some button positions are reversed for right-hand drive vehicles. ■ Using cellular phones Interference may be heard through the audio system’s speakers if a cellular phone is being used inside or close to the vehicle while the audio system is...
Page 367 5-1. Basic Operations NOTICE To prevent battery discharge ■ Do not leave the audio system on longer than necessary with the engine stopped. To avoid damaging the audio system ■ Take care not to spill drinks or other fluids over the audio system. HILUX_OM_OM0K440E_(GE)
Page 368: Steering Wheel Audio Switches
5-1. Basic Operations  Steering wheel audio switches Some audio features can be controlled using the switches on the steering wheel. Operation may differ depending on the type of audio system or navigation system. For details, refer to the manual provided with the audio system or navigation system.
Page 369 5-1. Basic Operations Turning on the power Press the “MODE” switch when the audio system is turned off. Changing the audio source Press the “MODE” switch when the audio system is turned on. The audio source changes as follows each time the button is pressed. If a mode cannot be used, it will be skipped.
Page 370 5-1. Basic Operations Selecting a track/file or song ® Press the “MODE” switch to select the CD, Bluetooth audio, iPod or USB memory mode. Press the “” or “” switch to select the desired track/file or song. Selecting an album ®...
Page 371: Aux Port/Usb Port
5-1. Basic Operations AUX port/USB port Connect an iPod, USB memory device or portable audio player to the AUX port/USB port as indicated below. Press the “MODE” button to select “iPod”, “USB” or “AUX”. Connecting using the AUX port/USB port iPod ■...
Page 372: Using The Audio System
5-2. Using the audio system Optimal use of the audio system The sound quality, volume balance and ASL settings can be adjusted. Displays the “SETUP” menu/ Selecting the mode Changes the following settings • Sound quality and volume balance P. 371 The sound quality and balance setting can be changed to pro- duce the best sound.
Page 373 5-2. Using the audio system Adjusting sound quality ■ Pressing the “TUNE >” or “< SELECT” button adjusts the level. Sound Mode Press the Press the Level quality mode displayed “< SELECT” “TUNE >” Bass “BASS” -5 to 5 High Treble “TREBLE”...
Page 374: Using The Radio
5-3. Using the radio Radio operation Press the “MODE” button until “AM” or “FM” is displayed.  Type A HILUX_OM_OM0K440E_(GE)
Page 375 5-3. Using the radio  Type B Power Adjusting the frequency Volume Seeking the frequency AM/FM mode button Station selectors AF/region code/TA mode setup Displaying the station list (type (type B only) B only) Setting station presets Search for the desired stations by pressing the “TUNE >”, “<...
Page 376 5-3. Using the radio Using the station list (type B only) Updating the station list ■ Press (LIST). The station list will be displayed. Press (UPDATE) to update the list. “Updating” is displayed while the searching is in process, and then avail- able stations will be listed on the display.
Page 377 5-3. Using the radio Traffic information ■ Press the “SETUP ENTER” button. Press the “TUNE >” or “< SELECT” button to select “RADIO”, and press the “SETUP ENTER” button. Press the “TUNE >” or “< SELECT” button to select “FM TA” mode.
Page 378 5-3. Using the radio ■ EON (Enhanced Other Network) system (for traffic announcement func- tion) (type B only) If the RDS station (with EON data) you are listening to is not broadcasting a traffic information program and the audio system is in the TA (traffic announcement) mode, the radio will be switched automatically to a station broadcasting a traffic information program in the EON AF list when traffic information begins.
Page 379: Cd Player Operation
5-4. Playing an audio CD and MP3/WMA discs CD player operation Insert a disc, press the “MODE” button to begin listening to a Type A  HILUX_OM_OM0K440E_(GE)
Page 380 5-4. Playing an audio CD and MP3/WMA discs  Type B CD eject Selecting a track, fast forward- ing or rewinding Power Random play or back button Volume Repeat play Changing the audio source/ playback Displaying track list Selecting a track from the list Displaying text message Moving the cursor to select a desired item from the list...
Page 381 5-4. Playing an audio CD and MP3/WMA discs Using the CD player Selecting a track ■ Press the “SEEK >” or “< TRACK” button to move up or down until the desired track number is displayed. Selecting a track from a track list ■...
Page 382 5-4. Playing an audio CD and MP3/WMA discs Playing back MP3 and WMA discs Selecting folders one at a time ■ Press (<FOLDER) or (FOLDER>) to select the desired folder. Selecting a folder and file from folder list ■ Press (LIST).
Page 383 Operation has stopped due to a high tempera- ture inside the player. Wait for a while and “WAIT” then press the “MODE” button. If the CD still cannot be played back, contact your Toyota dealer. This indicates that the MP3/WMA file is not “NO SUPPORT”...
Page 384 5-4. Playing an audio CD and MP3/WMA discs ■ MP3 and WMA files MP3 (MPEG Audio LAYER3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size by using MP3 compression. WMA (Windows Media Audio) is a Microsoft audio compression format. This format compresses audio data to a size smaller than that of the MP3 for- mat.
Page 385 5-4. Playing an audio CD and MP3/WMA discs ● Compatible media Media that can be used for MP3 and WMA playback are CD-Rs and CD- RWs. Playback in some instances may not be possible, depending on the status of the CD-R or CD-RW. Playback may not be possible or the audio may jump if the disc is scratched or marked with fingerprints.
Page 386 5-4. Playing an audio CD and MP3/WMA discs ● MP3 and WMA playback When a disc containing MP3 or WMA files is inserted, all files on the disc are first checked. Once the file check is finished, the first MP3 or WMA file is played.
Page 387 5-4. Playing an audio CD and MP3/WMA discs NOTICE CDs and adapters that cannot be used ■ Do not use the following types of CDs. Also, do not use 8 cm (3 in.) CD adapters, DualDiscs or printable discs. Doing so may damage the player and/or the CD insert/eject function. ●...
Page 388 5-4. Playing an audio CD and MP3/WMA discs NOTICE ● CDs with a transparent or translucent recording area CDs that have tape, stickers or CD-R ● labels attached to them, or that have had the label peeled off CD Player precautions ■...
Page 389: 5-5. Using An External Device
5-5. Using an external device Listening to an iPod Connecting an iPod enables you to enjoy music from the vehicle speakers. Connecting an iPod P. 370 Control panel  Type A HILUX_OM_OM0K440E_(GE)
Page 390 5-5. Using an external device  Type B Power Selecting a song, fast-forward- ing or rewinding Volume Random play or back button Changing the audio source/ playback Repeat play Selecting an iPod menu/song iPod menu mode, playback from the list Displaying song list Moving the cursor to select a Displaying text message...
Page 391 5-5. Using an external device Play mode list ■ First Second Third Fourth Play mode selection selection selection selection Playlists “Playlists” Songs select select Albums “Artists” Artists select Songs select select Albums “Albums” Songs select select “Songs” Songs select Podcasts Episodes “Podcasts”...
Page 392 5-5. Using an external device Selecting songs Press the “SEEK >” or “< TRACK” button to select the desired song. Selecting a song from the song list Press (LIST). The song list will be displayed. Press the “TUNE >” or “< SELECT” button to select a song. Press the “SETUP ENTER”...
Page 393 5-5. Using an external device Switching the display Press (TEXT) to display or hide the album title. If there are continuing texts, is displayed. Press and hold (TEXT) to display the remaining texts. ■ About iPod Use of the Made for Apple badge means that an accessory has been ●...
Page 394 ■ If an error message is displayed, refer to the following table and take the appropriate measures. If the problem is not rectified, take the vehicle to your Toyota dealer. Message Cause/Correction procedures This indicates a problem in the iPod or its con- “ERROR”...
Page 395 5-5. Using an external device ■ Compatible models ® ® ® ® ® The following iPod , iPod nano , iPod classic , iPod touch and iPhone devices can be used with this system. Made for ● • iPod touch (5th generation) •...
Page 396 5-5. Using an external device NOTICE To prevent damage to iPod ■ ● Do not leave iPod in the vehicle. The temperature inside the vehicle may become high, resulting in damage to the iPod. Do not push down on or apply unnecessary pressure to the iPod while it is ●...
Page 397: Listening Usb Memory Device
5-5. Using an external device Listening USB memory device Connecting a USB memory enables you to enjoy music from the vehicle speakers. Connecting a USB memory P. 370 Control panel  Type A HILUX_OM_OM0K440E_(GE)
Page 398 5-5. Using an external device  Type B Power Selecting a file, fast-forward- ing or rewinding Volume Random play or back button Changing the audio source/ playback Repeat play Selecting a file or folder from Selecting a folder the list Displaying folder list Moving the cursor to select a Displaying text message...
Page 399 5-5. Using an external device Selecting a folder Selecting folders one at a time ■ Press (<FOLDER) or (FOLDER>) to select the desired folder. Selecting a folder and file from folder list ■ Press (LIST). The folder list will be displayed. Press the “TUNE >”...
Page 400 ■ If an error message is displayed, refer to the following table and take the appropriate measures. If the problem is not rectified, take the vehicle to your Toyota dealer. Message Cause/Correction procedures This indicates a problem in the USB memory “ERROR”...
Page 401 5-5. Using an external device ● MP3 and WMA files MP3 (MPEG Audio LAYER3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size by using MP3 compression. WMA (Windows Media Audio) is a Microsoft audio compression format. This format compresses audio data to a size smaller than that of the MP3 format.
Page 402 5-5. Using an external device ● File names The only files that can be recognized as MP3/WMA and played are those with the extension .mp3 or .wma. ● ID3 and WMA tags ID3 tags can be added to MP3 files, making it possible to record the track title, artist name, etc.
Page 403 5-5. Using an external device ● Playback • To play MP3 files with steady sound quality, we recommend a fixed bit rate of at least 128 kbps and a sampling frequency of 44.1 kHz. • There is a wide variety of freeware and other encoding software for MP3 and WMA files on the market, and depending on the status of the encod- ing and the file format, poor sound quality or noise at the start of playback may result.
Page 404: Using The Aux Port
5-5. Using an external device Using the AUX port This port can be used to connect a portable audio device and lis- ten to it using the vehicle’s speakers. Connecting a portable player P. 370 ■ Operating portable audio devices connected to the audio system The volume can be adjusted using the vehicle’s audio controls.
Page 405: Using Bluetooth Devices
® 5-6. Using Bluetooth devices  ® Bluetooth audio/phone ® The following can be performed using Bluetooth wireless com- munication: ® ◆ Bluetooth audio ® The Bluetooth audio system enables you to enjoy music played on a portable digital audio player (portable player) from the vehicle speakers via wireless communication.
Page 406 ® 5-6. Using Bluetooth devices Device registration/connection flow ® 1. Register the Bluetooth device to be used with audio system (P. 410) ® 2. Connect the registered Bluetooth device to be used (P. 411, 413) 3. Set automatic connection of the device (P.
Page 407 ® 5-6. Using Bluetooth devices Audio unit  Type A  Type B ® Bluetooth connection condition ® If “BT” is not displayed, the Bluetooth audio/phone cannot be used. Display A message, name, number, etc. is displayed. Lower-case characters and special characters may not be displayed. “SETUP ENTER”...
Page 408 ® 5-6. Using Bluetooth devices Microphone You can use the microphone when talking on the phone. The person you are speaking to can be heard from the speakers. To use the hands-free system, you ® must register your Bluetooth phone in the system. (P. 410) ®...
Page 409 ® 5-6. Using Bluetooth devices First menu Second menu Third menu Operation details Adding a new num- “Add contacts” Registering a speed “Add SD” dial Deleting a number “Delete call stored in the call his- “Phonebook” history” tory Deleting a number “Delete contacts”...
Page 410: Using The Steering Wheel Switches
® 5-6. Using Bluetooth devices  Using the steering wheel switches The steering wheel switches can be used to operate a connected cellular phone, or portable digital audio player (portable player). ® Operating Bluetooth phone using the steering wheel switches Volume The voice guidance volume cannot be adjusted using this button.
Page 411: Registering A Bluetooth ® Device
® 5-6. Using Bluetooth devices ® Registering a Bluetooth device ® Before using the Bluetooth audio/phone, it is necessary to reg- ® ister a Bluetooth device in the system. Follow the procedure below to register (pair) a device: ® How to register a Bluetooth device Press the “SETUP ENTER”...
Page 412: Setup" Menu
5-7. “SETUP” menu Using the “SETUP” menu (“Bluetooth*” menu) ® Registering a Bluetooth device in the system allows the system to function. The following functions can be used for registered devices: Functions and operation procedures Press the “SETUP ENTER” button. Select “Bluetooth ”...
Page 413 5-7. “SETUP” menu ® Registering a Bluetooth device Select “Pairing” using the “TUNE >” or “< SELECT” button, and press the “SETUP ENTER” button, and press (Add New). ® ● If a Bluetooth device is not connected currently ® Perform the procedure for registering a Bluetooth device from step .
Page 414 5-7. “SETUP” menu Listing the registered cellular phones Select “List phone” using the “TUNE >” or “< SELECT” button, and press the “SETUP ENTER” button. The list of registered cellular phones will be displayed. ● Connecting the registered cellular phone to the audio system Select the name of the cellular phone to be connected using the “TUNE >”...
Page 415 5-7. “SETUP” menu Listing the registered portable players Select “List audio” using the “TUNE >” or “< SELECT” button, and press the “SETUP ENTER” button. The list of registered portable play- ers will be displayed. ● Connecting the registered portable player to the audio system Select the name of the portable player to be connected using the “TUNE >”...
Page 416 5-7. “SETUP” menu Changing the passkey Select “Passkey” using the “TUNE >” or “< SELECT” button, and press the “SETUP ENTER” button. Select a 4 to 8-digit passkey using the “TUNE >”, “< SELECT” and “SETUP ENTER” button. Input the number 1 digit at a time. When the entire number to be registered as a passkey has been input, press (ENTER).
Page 417 5-7. “SETUP” menu Setting the automatic connection confirmation display to on or off If the “Display setting” is set to on, the portable player connection sta- tus will be displayed when the engine switch is turned to the “ACC” position (vehicles without smart entry & start system) or ACCESSORY mode (vehicles with smart entry &...
Page 418: Using The "Setup" Menu ("Phone" Or "Tel" Menu)
5-7. “SETUP” menu Using the “SETUP” menu (“PHONE” or “TEL” menu) Functions and operation procedures To enter the menu for each function, press the “SETUP ENTER” but- ton and follow the steps below using the “TUNE >” or “< SELECT” but- ton: ●...
Page 419 5-7. “SETUP” menu Adding a new phone number Select “Add contacts” using the “TUNE >” or “< SELECT” button, and press the “SETUP ENTER” button. ● Transferring all contacts from the cellular phone Select “Overwrite all” using the “TUNE >” or “< SELECT” button, and press the “SETUP ENTER”...
Page 420 5-7. “SETUP” menu ● Deleting incoming call history Select “Incoming calls” using the “TUNE >” or “< SELECT” but- ton, and press the “SETUP ENTER” button. Select the desired phone number using the “TUNE >” or “< SELECT” button, and press the “SETUP ENTER” button. Press (YES).
Page 421 5-7. “SETUP” menu Deleting a registered phone number Select “Delete contacts” using the “TUNE >” or “< SELECT” button, and press the “SETUP ENTER” button. Select the desired phone number using the “TUNE >” or “< SELECT” button, and press the “SETUP ENTER” button. Press (YES).
Page 422 5-7. “SETUP” menu Setting call volume Select “Call volume” using the “TUNE >” or “< SELECT” button, and press the “SETUP ENTER” button. Change the call volume. To decrease the volume: Press the “< SELECT” button. To increase the volume: Press the “TUNE >” button. To set the volume, press (BACK).
Page 423 5-7. “SETUP” menu Setting ring tone Select “Ringtone” using the “TUNE >” or “< SELECT” button, and press the “SETUP ENTER” button. Select a ring tone (1 - 3) using the “TUNE >” or “< SELECT” button, and press the “SETUP ENTER” button. To set the selected ring tone, press (BACK).
Page 424: Bluetooth Audio
® 5-8. Bluetooth Audio ® Operating a Bluetooth enabled portable player  Type A  Type B Power Random play or back button Volume Repeat play Changing the audio source/ Selecting an album playback Playback/pause Selecting a track, fast-forward- Displaying text message ing or rewinding HILUX_OM_OM0K440E_(GE)
Page 425 ® 5-8. Bluetooth Audio Selecting an album Press (<FOLDER) or (FOLDER>) to select desired album. Selecting a track Press the “SEEK >” or “< TRACK” button to select the desired track. Fast-forwarding and rewinding tracks Press and hold the “SEEK >” or “< TRACK” button. Repeat play Pressing (RPT) changes modes in the following order:...
Page 426: Bluetooth Phone
® 5-9. Bluetooth Phone Making a phone call To enter the “PHONE” or “TEL” mode, press the off-hook switch. Dialing by selecting a name Select “Phonebook” using the “TUNE >” or “< SELECT” button, and press the “SETUP ENTER” button. Select the desired name using the “TUNE >”...
Page 427 ® 5-9. Bluetooth Phone Dialing from call histories Select “All calls”, “Missed calls”, “Incoming calls” or “Outgoing calls” using the “TUNE >” or “< SELECT” button, and press the “SETUP ENTER” button. Select a desired number using the “TUNE >” or “< SELECT” button, and press the off-hook switch.
Page 428: Receiving A Phone Call
® 5-9. Bluetooth Phone Receiving a phone call Answering the phone Press the off-hook switch. Refusing the call Press the on-hook switch. Receiving a call when on another call Press the off-hook switch. Pressing the off-hook switch again returns you to the previous call. Adjusting the ring tone volume when receiving a call To decrease the volume: Press the “VOL -”...
Page 429: Speaking On The Phone
® 5-9. Bluetooth Phone Speaking on the phone Transferring a call A call can be transferred between the cellular phone and system while dialing, receiving a call, or during a call. Use one of the following methods: a. Operate the cellular phone. Refer to the manual that comes with the cellular phone for the operation of the phone.
Page 430 ® 5-9. Bluetooth Phone ■ When talking on the phone ● Do not talk simultaneously with the other party. ● Keep the volume of the received voice down. Otherwise, voice echo will increase. ■ Automatic volume adjustment When vehicle speed is 80 km/h (50 mph) or more, the volume automatically increases.
Page 431: Bluetooth
® 5-10. Bluetooth ® Bluetooth Conditions affecting operation ■ ® The Bluetooth audio/phone may not operate normally in the following situ- ● ations: ® • The portable player does not support Bluetooth • The cellular phone is located outside the service area ®...
Page 432 ® 5-10. Bluetooth ■ Compatible models ® Bluetooth specifications: ● Ver. 1.1, or higher (Recommended: Ver. 2.1 + EDR or higher) Following Profiles: ● • A2DP (Advanced Audio Distribution Profile) Ver. 1.0 or higher (recom- mended: Ver. 1.2 or higher) •...
Page 433 ® 5-10. Bluetooth ■ Certification HILUX_OM_OM0K440E_(GE)
Page 434 ® 5-10. Bluetooth HILUX_OM_OM0K440E_(GE)
Page 435 ® 5-10. Bluetooth HILUX_OM_OM0K440E_(GE)
Page 436 ® 5-10. Bluetooth HILUX_OM_OM0K440E_(GE)
Page 437 ® 5-10. Bluetooth HILUX_OM_OM0K440E_(GE)
Page 438 ® 5-10. Bluetooth HILUX_OM_OM0K440E_(GE)
Page 439 ® 5-10. Bluetooth HILUX_OM_OM0K440E_(GE)
Page 440 ® 5-10. Bluetooth HILUX_OM_OM0K440E_(GE)
Page 441 ® 5-10. Bluetooth HILUX_OM_OM0K440E_(GE)
Page 442 ® 5-10. Bluetooth WARNING While driving ■ ® Do not use the portable audio player or connect the Bluetooth system. ■ Caution regarding interference with electronic devices ® Your audio unit is fitted with Bluetooth antennas. People with implantable ● cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardioverter defibrillators should maintain a reasonable dis- ®...
Page 443: Using The Multimedia
5-11. Using the multimedia system  Multimedia system Multimedia system functions The following functions can be used on the multimedia system.  Type A This illustration is for left-hand drive vehicles. For right-hand drive vehicles, button positions are reversed. Menu (P. 462) ®...
Page 444 5-11. Using the multimedia system  Type B Setup (P. 466, 467, 479) ® Audio system and Bluetooth settings can be adjusted. Audio system (P. 481, 490, 495, 515, 520, 524, 541) ® Radio, CD, iPod, USB, AUX, A/V and Bluetooth audio can be played to.
Page 445 5-11. Using the multimedia system WARNING Laser product ■ This product is a class 1 laser product. Do not open the cover of the player or attempt to repair the unit yourself. Refer servicing to qualified personnel. NOTICE To prevent battery discharge ■...
Page 446: Basic Operations
5-12. Basic Operations Multimedia system Operations Operations such as listening to audio, using the hands-free phone and changing the multimedia system settings are started by using the following buttons. Multimedia system operation buttons  Type A This illustration is for left-hand drive vehicles. For right-hand drive vehicles, button positions are reversed.
Page 447 5-12. Basic Operations  Type B “MENU” button Press this button to display the “Menu” screen. (P. 462) “HOME” button Press this button to display the home screen. (P. 464) “AUDIO” button Display the “Select Audio Source” screen or audio top screen. (P.
Page 448 5-12. Basic Operations Touch screen gestures Operations are performed by touching the screen directly with your finger. Operation method Outline Main use Touch Changing and selecting Quickly touch various settings. release once. Drag Touch screen Scrolling the lists, using with your finger, and scroll bar in lists, etc.
Page 449 5-12. Basic Operations Entering letters and numbers When entering data, letters and numbers can be entered via the screen. Type A Type B   Type C  Text field. Entered character(s) will be displayed. Select to enter desired characters. Select to erase one character.
Page 450 5-12. Basic Operations Changing character and keyboard type (if equipped) Select Select the desired character and keyboard and select “OK”. ● The selectable character and keyboard type may differ depend- ing on the model or region. ● Depending on the conditions data is being entered, it may not possible to change keyboard characters.
Page 451 5-12. Basic Operations NOTICE To avoid damaging the touch screen ■ ● To prevent damaging the screen, lightly touch the screen buttons with your finger. Do not use objects other than your finger to touch the screen. ● Wipe off fingerprints using a glass cleaning cloth. Do not use chemical ●...
Page 452: Steering Wheel Audio Switches
5-12. Basic Operations Steering wheel audio switches Some audio features can be controlled using the switches on the steering wheel. Operation may differ depending on the type of audio system or navigation system. For details, refer to the manual provided with the audio system or navigation system.
Page 453: Remote Controller
5-12. Basic Operations  Remote controller The remote controller can be used to operate the multimedia system. Turning the multimedia system Pausing the current opera- on and off tion. Press the button again to cancel. Changing audio modes Seeking up available radio Setting the sound (P.
Page 454 5-12. Basic Operations Receiving part of the infrared rays Operate the controller towards the receiving part of the infrared rays. Before using the controller (for new vehicle owners) An insulating sheet is set to pre- vent battery from being depleted. Remove the insulating sheet before using the controller.
Page 455 ● The operational range is reduced. Use a CR2025 Lithium battery ■ ● Battery can be purchased at your Toyota dealer, electric appli- ance shop, or camera stores. ● Replace only with the same or equivalent type recommended by your Toyota dealer.
Page 456 5-12. Basic Operations WARNING To prevent accidents and electric shock ■ Do not disassemble or modify the controller. ■ When the controller is not used Stow the controller. Injuries may result in the event of sudden braking, sud- den swerving or an accident. ■...
Page 457: Aux Port/Usb Port
5-12. Basic Operations AUX port/USB port Connect an iPod, USB memory device or portable audio device to the USB/AUX port as indicated below. Select “iPod”, “USB”, “AUX” or “A/V” on the audio source selection screen and the device can be operated via multimedia system. Connecting using the USB/AUX port iPod ■...
Page 458 5-12. Basic Operations Using a 4-pole AUX cable To view a video on an iPod video or VTR, it is necessary to use a 4-pole AUX cable to connect the portable audio device. When connecting a portable audio device to the AUX port, use a 4-pole AUX cable with a plug that matches the exact layout shown in the illustration.
Page 459 5-12. Basic Operations WARNING While driving ■ Do not connect portable audio device or operate the controls. NOTICE ■ To prevent damage to portable audio device or its terminal ● Do not leave the portable audio device in the vehicle. The temperature inside the vehicle may become high, resulting in damage to the device.
Page 460: Basic Audio Operations
5-12. Basic Operations Basic Audio Operations Basic audio operations are explained in this section. Operating the audio system Type A  This illustration is for left-hand drive vehicles. For right-hand drive vehicles, button positions are reversed. Type B  HILUX_OM_OM0K440E_(GE)
Page 461 5-12. Basic Operations Press this button to eject a disc Insert a disc into the disc slot Press the “” or “” button to tune up or down for a radio station, or to access a desired track or file. Press and hold the “”...
Page 462 5-12. Basic Operations Random playback Each time “RAND” is selected, the mode changes in the following order: Icon Action Target audio source Random play of the disc/ folder/album Random play of all folders MP3/WMA/AAC disc, USB ® Random play of all tracks Bluetooth , USB Repeat play...
Page 463: 5-13. Setup
5-13. Setup  Menu screen Displaying the “Menu” screen Press the “MENU” button. Type A Type B   Select to display the audio control screen. (P. 481) Select to display the hands-free operation screen. (P. 543) Select to display the “Setup” screen. (P. 466) Select to display the “MirrorLink ”...
Page 464 5-13. Setup Reordering the menu icons Order of the menu icons can be changed. Press the “MENU” button. Select “Reorder”. Select the desired menu icon to be moved. Select to move the menu icon, and select “OK”. HILUX_OM_OM0K440E_(GE)
Page 465: Home Screen Operation
5-13. Setup  Home screen operation Press the “HOME” button to display the “Home” screen. The home screen can display multiple information screens simultaneously. When hands-free mode is selected, it is possi- ble to make call on the “Home” screen if the desired phone num- ber is registered on the 4 displayed buttons.
Page 466 5-13. Setup Screen for home screen settings The display items/area on the home screen can be changed. Select Select “Home Screen”. ● Select “Two Panel” or “Three Panel”. Select the desired area. Select the desired item. ● When the selected item is already being displayed and another area is selected for that item, the item that it is replacing...
Page 467: Setup" Screen
5-13. Setup “Setup” screen You can adjust the multimedia system to your desired settings. Control screen Audio system with “MENU” button  Press the “MENU” button, then select “Setup” to display the “Setup” screen. Audio system with “SETUP” button  Press the “SETUP”...
Page 468: General Settings
5-13. Setup General settings Settings are available for adjusting the operation sounds, screen animation, etc. Screen for general settings  Audio system with “MENU” button Press the “MENU” button. Select “Setup”. Select “General”. Select the item to be set.  Audio system with “SETUP”...
Page 469 5-13. Setup Type B   Type C HILUX_OM_OM0K440E_(GE)
Page 470 (P. 473) Select to delete personal data. (P. 474) Select to update software versions. For details, contact your Toyota dealer. Select to display the software information. Notices related to third party software used in this product are enlisted. (This includes instructions for obtaining such software, where applicable.)
Page 471 5-13. Setup Screen for system time settings (if equipped) Used for changing time zones and the on/off settings of daylight sav- ing time. Display the “General settings” screen. (P. 467) Select “System time”. Select the items to be set. Select to change the time zone.
Page 472 5-13. Setup Transferring images ■ Open the cover and connect a USB memory. Turn on the power of the USB memory if it is not turned on.  Type A  Type B Press the “MENU” button. Select “Setup”. Select “General”. Select “Customize Startup Image”/“Customise startup image”...
Page 473 5-13. Setup Select the desired image. Select “OK”. HILUX_OM_OM0K440E_(GE)
Page 474 5-13. Setup Setting the screen off images ■ Display the “General Settings” screen. (P. 467) Select “Customize Screen Off Image”/“Customise screen off image”. Select the desired image. Select “OK”. Deleting transferred images ■ Display the “General Settings” screen. (P. 467) Select “Customize Startup Image”/“Customise startup image”...
Page 475 5-13. Setup Deleting personal data Display the “General Settings” screen. (P. 467) Select “Delete Personal Data”. Select “Delete”. Check carefully beforehand, as data cannot be retrieved once deleted. Select “Yes” when the confirmation screen appears. Registered or changed personal settings will be deleted or returned to their default conditions.
Page 476: Audio Settings
5-13. Setup Audio settings Detailed audio settings can be programmed. Screen for audio settings Audio system with “MENU” button  Press the “MENU” button. Select “Setup”. Select “Audio”. Select the item to be set.  Audio system with “SETUP” button Press the “SETUP”...
Page 477 5-13. Setup FM radio settings (if equipped) Display the audio setting screen. (P. 475) Select “FM Radio Settings”. Select the desired button to be set. Type A Type B   Refresh station list (if equipped) Select to refresh the station list. FM Traffic announcement on/off P.
Page 478 5-13. Setup DAB radio settings (if equipped) Display the audio setting screen. (P. 475) Select “DAB radio settings”. Select the desired button to be set. Select to refresh the station list. Select on/off to set L-band in the tune range. When off is selected, the physical chan- nel range for tuning opera- tions is limited to Band III,...
Page 479 5-13. Setup External video settings Display the audio setting screen. (P. 475) Select “External video settings”. Select a screen button for the desired setting. HILUX_OM_OM0K440E_(GE)
Page 480: Display Settings
5-13. Setup Display settings The brightness, contrast, tone and colour of the screen can be adjusted, and/or changed to either day or night mode. Screen for display settings  Audio system with “MENU” button Press the “MENU” button. Select “Setup”. Select “Display”.
Page 481 5-13. Setup Brightness, contrast, tone and color adjustment The brightness, contrast, tone and colour of the screen can be adjusted. Select “General”, “Camera” or “Video”. Select the desired item. “-” “+” “Brightness” Darker Brighter “Contrast” Weaker Stronger “Tone” Weaker Stronger “R”...
Page 482: Using The Audio System
5-14. Using the audio system Selecting the audio source Switching between audio sources such as radio and CD are explained in this section. Changing audio source Press the “AUDIO” button. Select “Source”. Select desired audio source. HILUX_OM_OM0K440E_(GE)
Page 483 5-14. Using the audio system Reordering the audio source Select “Source”. Select “Reorder”. Select the desired audio source then to reorder. Using the steering wheel switches to change audio source Press the “MODE/HOLD” switch when the audio system is turned on. The audio source changes each time the switch is pressed.
Page 484: List Screen Operation
5-14. Using the audio system List screen operation When a list style screen is displayed, use the appropriate but- tons to scroll through the list. How to scroll : Select to skip to the next or previous page. Select and hold to scroll through the dis- played list.
Page 485 5-14. Using the audio system Selecting an item from the list Select the cover art button or “Browse” button on the screen. Cover art button “Browse” button Select the desired item. According to the audio device, the following list is displayed. Audio source Cover art button “Browse”...
Page 486 5-14. Using the audio system Character jump buttons in lists Some lists contain character screen buttons, “ABC”, “DEF” etc., which allow a direct jump to list entries that begin with the same letter as the character screen button. Select the desired character jump buttons.
Page 487: Optimal Use Of The Audio System
5-14. Using the audio system Optimal use of the audio system On the “Sound Settings” screen, sound quality, volume balance and DSP settings can be adjusted. How to adjust the sound settings and sound quality Select “Sound” to adjust the sound settings.
Page 488 5-14. Using the audio system  “DSP” tab Automatic sound leveliser (ASL) Select the ASL level among “High”, “Mid”, “Low” and “Off”. ■ The sound quality level is adjusted individually The treble, mid and bass levels can be adjusted for each audio mode sepa- rately.
Page 489: Audio Screen Adjustment
5-14. Using the audio system Audio screen adjustment Settings are available for selecting the screen size and adjusting display. Screen size settings The screen size can be selected for each type of media. Select “Options” on the control screen. Select “Screen format” or “Wide”...
Page 490 5-14. Using the audio system Adjusting the audio screen The brightness, contrast, color and tone of the screen can be adjusted. Select “Options” on the control screen. Select “Display” on the option screen. Select the desired item to be adjusted. “-”...
Page 491: 5-15. Using The Radio
5-15. Using the radio Radio operation Select “AM” “FM” or “DAB” (if equipped) on the audio source selection screen to begin listening to the radio. Control screen Pressing the “AUDIO” button displays the audio control screen from any screens of the selected source. ...
Page 492 5-15. Using the radio Selecting a station Tune in to the desired station using one of the following methods.  AM/FM Presets screen: Press the “” or “” button on “TUNE•TRACK” to step up/down frequencies. Station list screen: Press the “” or “” button on “TUNE•TRACK” to move up/down the station list.
Page 493 5-15. Using the radio Time shift operation (DAB) (if equipped) The service you are currently listening to can be re-listened to at any time. Select “Time shift”. Select to jump forward/backward by 10 sec- onds. Select and hold to fast forward/rewind. About Time shift ■...
Page 494 5-15. Using the radio RDS (Radio Data System) (if equipped) Depending on the availability of RDS infrastructure, the service may not function properly. Listening to stations of the same network ■ FM Alternative frequency: The station among those of the same network with strong reception is selected.
Page 495 5-15. Using the radio ■ EON (Enhanced Other Network) system (if equipped) If the RDS station (with EON data) currently being listened to is not broad- casting a traffic information program in the TA (Traffic Announcement) mode, the radio will be switched to the traffic information program automatically by using the EON AF list.
Page 496: Cd Player Operation
5-16. Playing an audio CD and MP3/WMA/AAC discs CD player operation Insert a disc or select “DISC” on the audio source selection screen with a disc inserted to begin listening to a CD. Control screen Pressing the “AUDIO” button displays the audio control screen from any screens of the selected source.
Page 497: 5-17. Playing Video Cd
5-17. Playing video CD  Video CD player operation Vehicles without smart entry & start system  For safety reasons, the video CD can be viewed only when the vehicle is completely stopped with the engine switch in the “ACC” or “ON” position and the parking brake applied. Vehicles with smart entry &...
Page 498 5-17. Playing video CD Video CD option screen Select “Options”. Select the desired setting to change. While on the menu screen: Select to change to the previ- ous screen. While playing a disc: Select to play the previous track. While on the menu screen: Select to change to the next screen.
Page 499: 5-18. Playing Dvd Video
5-18. Playing DVD video  DVD player operation Vehicles without smart entry & start system  For safety reasons, the DVD video discs can be viewed only when the vehicle is completely stopped with the engine switch in the “ACC” or “ON” position and the parking brake applied. Vehicles with smart entry &...
Page 500 5-18. Playing DVD video Control screen Pressing the “AUDIO” button displays the audio control screen from any screens of the selected source. Audio source selection screen appears Shows progress Setting the sound (P. 486) Displaying full screen DVD During playback: Select to fast- forward.
Page 501 5-18. Playing DVD video DVD option screen Select “Options”. Select the desired setting to change. Search by title number Display predetermined scene and start playing from there Change audio language Change subtitle language (P. 501) Change angle (P. 501) Change screen size (P. 488) Select to display the image quality adjustment screen.
Page 502 5-18. Playing DVD video Changing the audio language Select “Audio”. Each time “Change” selected, the audio language is changed. languages available restricted to those available on the DVD disc. Changing the subtitle language Select “Subtitle”. Each time “Change” selected, the subtitle language is changed.
Page 503 5-18. Playing DVD video DVD settings Select “DVD settings”. (P. 500) Select the items to be set. When “Default” is selected, all menus are initialized. Setting audio language ■ Select “Audio language”. Select the desired language to be heard on the “Audio language” screen.
Page 504 5-18. Playing DVD video Setting multi-angle mark ■ The multi-angle mark can be turned on or off on the screen while discs that are multi-angle compatible are being played. Select “Angle mark”. Setting parental lock ■ The level of viewer restrictions can be changed. Select “Parental lock”.
Page 505 5-18. Playing DVD video ● Language codes Code Language Code Language 0514 English 0426 Bhutani 0618 French 0515 Esperanto 0405 German 0520 Estonian 0920 Italian 0521 Basque 0519 Spanish 0601 Persian 2608 Chinese 0609 Finnish 1412 Dutch 0610 Fiji 1620 Portuguese 0615 Faroese...
Page 506 5-18. Playing DVD video Code Language Code Language 1119 Kashmiri 1908 Serbo-Croatian 1121 Kurdish 1909 Sinhalese 1125 Kirghiz 1911 Slovak 1201 Latin 1912 Slovenian 1214 Lingala 1913 Samoan 1215 Laothian 1914 Shona 1220 Lithuanian 1915 Somali 1222 Latvian, Lettish 1917 Albanian 1307 Malagasy...
Page 507: Cd/Dvd Player And Dvd Video Disc Information
Error messages If the following error messages appear on the screen, refer to the fol- lowing table and take the appropriate measures. If the problem is not rectified, take the vehicle to your Toyota dealer. Message Cause/Correction procedures It indicates that the disc is dirty, damaged, or it was inserted upside down.
Page 508 5-18. Playing DVD video Symbols shown on DVD video discs ■ Symbol Meaning NTSC/PAL Indicates NTSC/PAL format of color TV. Indicates the number of audio tracks. Indicates the number of language subtitles. Indicates the number of angles. Indicates the screen to be selected. Wide screen: 16:9 Standard: 4:3 Indicates a region code by which this video disc...
Page 509 5-18. Playing DVD video CD/DVD player protection feature ■ To protect the internal components, playback is automatically stopped when a problem is detected. If disc is left inside the CD/DVD player or in the ejected posi- ■ tion for extended periods Disc may be damaged and may not play properly.
Page 510 5-18. Playing DVD video ● Region codes The region codes are provided on DVD players and DVD discs. If the DVD video disc does not have the same region code as the DVD player, you cannot play the disc on the DVD player. (P.
Page 511 5-18. Playing DVD video MP3, WMA and AAC files ■ MP3 (MPEG Audio LAYER 3) is a standard audio compression for- mat. Files can be compressed to approximately 1/10 of their original size by using MP3 compression. WMA (Windows Media Audio) is a Microsoft audio compression for- mat.
Page 512 5-18. Playing DVD video ● AAC file compatibility • Compatible standards MPEG4/AAC-LC • Compatible sampling frequencies 11.025, 12, 16, 22.05, 24, 32, 44.1, 48 (kHz) • Compatible bit rates 16—320 (kbps) • Compatible channel modes: 1 ch and 2 ch ●...
Page 513 5-18. Playing DVD video ● Discs containing multi-session recordings As the audio system is compatible with multi-sessions, it is possi- ble to play discs that contain MP3, WMA and AAC files. How- ever, only the first session can be played. ●...
Page 514 5-18. Playing DVD video ● Playback • To play MP3 files with steady sound quality, we recommend a fixed bit rate of at least 128 kbps and a sampling frequency of 44.1 kHz. • CD-R, CD-RW, DVD-R or DVD-RW playback may not be pos- sible in some instances, depending on the characteristics of the disc.
Page 515 5-18. Playing DVD video NOTICE Discs and adapters that cannot be used ■ Do not use the following types of discs. Also, do not use 8 cm (3 in.) disc adapters, DualDiscs or printable discs. Doing so may damage the player and/or disc insert/eject function. ●...
Page 516: Using An External Device
5-19. Using an external device iPod player operation Select “iPod (DEVICE NAME)” on the audio source selection screen. Connecting an iPod P. 456 Control screen Pressing the “AUDIO” button displays the audio control screen from any screens of the selected source. ...
Page 517 5-19. Using an external device Selecting a play mode Select “Browse” on the screen. Select the desired play mode by selecting the “Playlists”, “Artists”, “Albums”, “Songs”, “Podcasts”, “Audiobooks”, “Genres”, “Composers” or “Videos” tab. Then select a song to begin using the selected play mode.
Page 518 5-19. Using an external device ■ About iPod Use of the Made for Apple badge means that an accessory has been ● designed to connect specifically to the Apple product(s) identified in the badge, and has been certified by the developer to meet Apple performance standards.
Page 519 Error messages If the following error messages appear on the screen, refer to the following table and take the appropriate measures. If the problem is not rectified, take the vehicle to your Toyota dealer. Message Cause/Correction procedures This indicates a problem in the iPod or its con- “iPod error”...
Page 520 5-19. Using an external device ■ Compatible models ® ® ® ® ® The following iPod , iPod nano , iPod classic , iPod touch and iPhone devices can be used with this system. Made for ● • iPod touch (5th generation) •...
Page 521: Usb Memory Device Player Operation
5-19. Using an external device USB memory device player operation Select “USB” on the audio source selection screen. Connecting a USB memory device P. 456 Control screen Pressing the “AUDIO” button displays the audio control screen from any screens of the selected source. USB audio USB video (if equipped) ...
Page 522 Error messages If the following error messages appear on the screen, refer to the following table and take the appropriate measures. If the problem is not rectified, take the vehicle to your Toyota dealer. Message Cause/Correction procedures This indicates a problem in the USB memory “USB error”...
Page 523 5-19. Using an external device ■ USB memory Compatible devices ● USB memory device that can be used for MP3, WMA and AAC (audio mode) or MP4, WMV and AVI (video mode) playback. ● Compatible device formats The following device format can be used: •...
Page 524 5-19. Using an external device ● MP3, WMA and AAC playback • When a device containing MP3, WMA or AAC files is connected, all files in the USB memory device are first checked. Once the file check is fin- ished, the first MP3, WMA or AAC file is played. To make the file check finish more quickly, we recommend that you do not include any files other than MP3, WMA or AAC files or create any unnecessary folders.
Page 525: Using The Aux Port
5-19. Using an external device Using the AUX port This port can be used to connect a portable audio device and lis- ten to it through the vehicle’s speakers. Connecting a portable audio device P. 456 Control screen Press the “AUDIO” button to display the audio control screen. Select “Source”...
Page 526: Vtr
5-19. Using an external device Control screen Connect a device to the AUX port. (P. 456) Press the “AUDIO” button to display the audio control screen. Select “Source” and select “A/V”. Audio source selection screen appears Setting the sound (P. 486) Displaying full screen VTR Options screen appears VTR options...
Page 527: 5-20. Connecting Bluetooth
® 5-20. Connecting Bluetooth Preparations to use wireless communication ® The following can be performed using Bluetooth wireless com- munication: A portable audio player can be operated and listened to via ■ the multimedia system Hands-free phone calls can be made via a cellular phone ■...
Page 528 ® 5-20. Connecting Bluetooth Device registration/connection flow ® 1. Register the Bluetooth device to be used with the multi- media system (P. 529, 530, 532) ® 2. Select the Bluetooth device to be used (P. 534) To be used for audio To be used for hands-free phone ®...
Page 529 ® 5-20. Connecting Bluetooth Registering and connecting from the “Bluetooth setup” screen To display the screen below, follow the steps below.  Audio system with “MENU” button Press the “MENU” button and select “Setup” on the “Menu” screen. Select “Bluetooth ”...
Page 530: Connecting Bluetooth
® 5-20. Connecting Bluetooth ® Registering a Bluetooth audio player for the first time ® To use the Bluetooth Audio, it is necessary to register an audio player with the system. Once the player has been registered, it is possible to use the ®...
Page 531: Registering A Bluetooth ® Phone For The First Time
® 5-20. Connecting Bluetooth ® Registering a Bluetooth phone for the first time To use the hands-free system, it is necessary to register a ® Bluetooth phone with the system. Once the phone has been registered, it is possible to use the hands-free system.
Page 532 ® 5-20. Connecting Bluetooth ® ® Register your Bluetooth device on the Bluetooth system. A PIN-code is not required for SSP (Secure Simple Pairing) compatible ® ® Bluetooth devices. Depending on the type of Bluetooth device being connected, a message confirming registration may be displayed on the ®...
Page 533: Registering A Bluetooth ® Device
® 5-20. Connecting Bluetooth ® Registering a Bluetooth device ® Up to 5 Bluetooth devices can be registered. ® Bluetooth compatible phones (HFP) and audio players (AVP) can be registered simultaneously. This operation cannot be performed while driving. ® How to register a Bluetooth device Display the “Bluetooth Setup”...
Page 534 ® 5-20. Connecting Bluetooth ® Removing a Bluetooth device Display the “Bluetooth Setup” screen. (P. 528) Select “Remove”. Select the desired device. Select “Yes” when the confirmation screen appears. Check that a confirmation screen is displayed when the operation is complete.
Page 535: Connecting A Bluetooth ® Device
® 5-20. Connecting Bluetooth ® Connecting a Bluetooth device ® Up to 5 Bluetooth devices (Phones (HFP) and audio players (AVP)) can be registered. ® If more than 1 Bluetooth device has been registered, select which device to connect to. ®...
Page 536 ® 5-20. Connecting Bluetooth Check that a confirmation screen is displayed when the operation is complete. If an error message is displayed, follow the guidance on the screen to try again. ® Depending on the type of Bluetooth device being connected, it may be necessary to perform additional steps on the device.
Page 537 ® 5-20. Connecting Bluetooth Manual connection When auto connection has failed or “Bluetooth Power” is turned off, ® you must connect the Bluetooth device manually. Display the “Bluetooth Setup” screen. (P. 528) ® Follow the steps in “How to select a Bluetooth device”...
Page 538: Displaying A Bluetooth ® Device Details
® 5-20. Connecting Bluetooth ® Displaying a Bluetooth device details You can confirm and change the registered device details. ® Bluetooth device registration status Display the “Bluetooth Setup” screen. (P. 528) ® : The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
Page 539 ® 5-20. Connecting Bluetooth Changing a device name Select “Device Name”. Enter the name and select “OK”. Even if the device name is changed, the name registered in your ® Bluetooth device does not change. Setting audio player connection method Select “Connect Audio Player From”.
Page 540: Detailed Bluetooth ® Settings
® 5-20. Connecting Bluetooth ® Detailed Bluetooth settings ® You can confirm and change the detailed Bluetooth settings. ® How to check and change detailed Bluetooth settings Display the “Bluetooth Setup” screen. (P. 528) Select “System Settings”. Select the desired item to be set.
Page 541 ® 5-20. Connecting Bluetooth Changing “Bluetooth Power” Select “Bluetooth Power”.  Vehicles without smart entry & start system ® When “Bluetooth Power” is on: The Bluetooth device is automati- cally connected when the engine switch is turned to the “ACC” or “ON”...
Page 542: Listening To Bluetooth
® 5-21. Bluetooth Audio ® Listening to Bluetooth audio ® The Bluetooth audio system enables the user to enjoy music played on a portable player from the vehicle speakers via wire- less communication. ® When a Bluetooth device cannot be connected, check the connec- ®...
Page 543 ® 5-21. Bluetooth Audio Status display You can check indicators of connection status and battery charge on the screen. Battery charge The battery charge indicator may not be displayed depending on the connected device. Connection status Indicators Conditions Good Not connected Connection status Full Empty...
Page 544: Bluetooth Phone
® 5-22. Bluetooth Phone ® Using a Bluetooth Phone The hands-free system is a function that allows you to use your cellular phone without touching it. ® ® This system supports Bluetooth . Bluetooth is a wireless data system that allows the cellular phone to wirelessly connect to the hands-free system and make/receive calls.
Page 545 ® 5-22. Bluetooth Phone Select to use the phone message function (P. 555) Telephone switches (P. 561) ■ Microphone ■ The vehicle’s built in micro- phone is used when talking on the phone. The person you are speaking to can be heard from the front speakers.
Page 546: Making A Call
® 5-22. Bluetooth Phone Making a call ® Once a Bluetooth phone is registered, you can make a call using the following procedure: Dialing Display the phone top screen. (P. 543) Select the “Dial Pad” tab and enter the phone number. Press the switch on the steering wheel or select and then...
Page 547 ® 5-22. Bluetooth Phone Dialing from contacts list Calls can be made by using contact data which is transferred from a registered cellular phone. (P. 546) Up to 2500 contacts (maximum of 4 phone numbers and e-mail addresses [if equipped] per contact) can be registered in the contact list.
Page 548 ® 5-22. Bluetooth Phone ® For PBAP compatible Bluetooth phones when “Automatic ■ Contact/History Transfer”/“Automatic transfer” is set to on (P. 565) Contacts are transferred automatically. ® For PBAP compatible Bluetooth phones when “Automatic ■ Contact/History Transfer”/“Automatic transfer” is set to off (P.
Page 549 ® 5-22. Bluetooth Phone Dialing from favorites You can make a call using numbers registered in the favorites. (P. 571) Display the phone top screen. (P. 543) Select the “Favorites”/“Favourites” tab on the phone top screen and select the desired contact. Select the desired number and then check that the “Call”...
Page 550 ® 5-22. Bluetooth Phone Dialing from home screen (if equipped) Display the home screen. (P. 464) Select the desired contact. ■ Call history list ● If you make a call to or receive a call from a number registered in the contact list the name is displayed in the call history.
Page 551: Receiving A Call
® 5-22. Bluetooth Phone Receiving a call When a call is received, the following screen is displayed together with a sound. To answer the phone • Press the switch on the steering wheel. • Select The incoming call display mode can be set.
Page 552: Speaking On The Phone
® 5-22. Bluetooth Phone Speaking on the phone The following screen is displayed when speaking on the phone. Audio system with “MENU” but- Audio system with “SETUP”   button Displaying the dial pad to send tones (P. 552) Muting your voice to the other party Changing handset modes between hands-free and cellular phone Select to adjust your voice volume that the other party hears from their speaker (P.
Page 553 ® 5-22. Bluetooth Phone Inputting tones By dial pad ■ Select “0-9”. Input the number. By selecting “Release Tones” ■ “Release Tones” appear when a continuous tone signal(s) contain- ing a (w) is registered in the contact list. Select “Release Tones”. Transmit volume setting Select “Transmit Volume”.
Page 554 ® 5-22. Bluetooth Phone Call waiting When a call is interrupted by a third party while talking, this screen is displayed. To talk with the other party: • Press the switch on the steering wheel. • Select To refuse to receive the call: •...
Page 555 ® 5-22. Bluetooth Phone ■ Transmit volume setting The sound quality of the voice heard from the other party’s speaker may be ● negatively impacted. “Transmit volume” is dimmed when mute is on. ● ■ Transferring calls It is not possible to transfer from hands-free to the cellular phone while driv- ●...
Page 556: Bluetooth ® Phone Message Function
® 5-22. Bluetooth Phone  ® Bluetooth phone message function Received messages can be forwarded from the connected ® Bluetooth phone, enabling checking and replying using the multimedia system. ® Depending on the type of Bluetooth phone connected, received messages may not be transferred to the message inbox. If the phone does not support the message function, this func- tion cannot be used.
Page 557 ® 5-22. Bluetooth Phone Receiving a message When an e-mail/SMS/MMS is received, the incoming message screen pops up with sound and is ready to be operated on the screen. Select to check the message. Select to not open the mes- sage.
Page 558 ® 5-22. Bluetooth Phone Checking the messages Display the “Message inbox” screen. (P. 555) Select the desired message from the list. Check that the message is dis- played. Select to make a call to the sender. Select to have messages read out.
Page 559 ® 5-22. Bluetooth Phone Replying to a message (quick reply) 15 messages have already been stored. Display the “Message inbox” screen. (P. 555) Select the desired message from the list. Select “Quick message”. Select the desired message. Select “Send”. While the message is being sent, a sending message screen is displayed. To cancel sending the message, select “Cancel”.
Page 560 ® 5-22. Bluetooth Phone Calling the message sender Calls can be made to an e-mail/SMS/MMS message sender’s phone number. Calling from e-mail/SMS/MMS message display ■ Display the “Message inbox” screen. (P. 555) Select the desired message. Select If there are 2 or more phone numbers, select the desired number.
Page 561 ® 5-22. Bluetooth Phone Calling from a number within a message Calls can be made to a number identified in a message’s text area. Display the “Message inbox” screen. (P. 555) Select the desired message. Select the text area. Select the desired number. Identified phone numbers contained in the message are displayed.
Page 562: Using The Steering Wheel Switches
® 5-22. Bluetooth Phone Using the steering wheel switches The steering wheel switches can be used to operate a connected cellular phone. Operating a telephone using the steering wheel switches Volume switch • Increase/Decrease the vol- • Press and hold: Continuously increase/decrease the vol- On hook switch •...
Page 563: Bluetooth ® Phone Settings
® 5-22. Bluetooth Phone ® Bluetooth phone settings You can adjust the hands-free system to your desired settings. “Phone Settings”/“Telephone/message settings” screen To display the screen below, follow the steps below.  Audio system with “MENU” button Press the “MENU” button and select “Setup” on the “Menu” screen. Select “Phone”/“Telephone”...
Page 564 ® 5-22. Bluetooth Phone Select the desired item to be set. “Phone Settings” screen  “Telephone/message settings” screen  Setting the desired ringtone. Select “-” or “+” to adjust the ringtone volume. Select “-” or “+” to adjust the message readout volume. Select to set the desired incoming SMS/MMS tone.
Page 565 ® 5-22. Bluetooth Phone ■ Displaying the “Phone Settings” screen/“Telephone/message settings” screen in a different way Display the phone top screen. (P. 543) Select “Settings”. HILUX_OM_OM0K440E_(GE)
Page 566: Contact/Call History
5-23. Phonebook Contact/call history settings ® The contact can be transferred from a Bluetooth phone to the system. The contact also can be added, edited and deleted. The call history can be deleted and contact and favorites can be changed. “Contact/Call History Settings”...
Page 567 5-23. Phonebook Clearing contacts from the call history. Adding new contacts to the contact list. (P. 568) Editing contacts in the contact list. (P. 569) Deleting contacts from the contact list. (P. 570) Resetting all setup items. Depending on the type of phone, certain functions may not be available. ®...
Page 568 5-23. Phonebook ® For PBAP incompatible but OPP compatible Bluetooth ■ phones Display “Contact/Call History Settings” screen. (P. 565) Select “Update Contacts From Phone”/“Update contacts from telephone”. ® Transfer the contact data to the system using a Bluetooth phone. This operation may be unnecessary depending on the type of cellular phone.
Page 569 5-23. Phonebook Registering a new contact to the contact list New contact data can be registered. Up to 4 numbers per person can be registered. For PBAP compatible ® Bluetooth phones, this function is available when “Automatic Contact/History Transfer”/“Automatic transfer” is set to off. (P. 565) Display “Contact/Call History Settings”...
Page 570 5-23. Phonebook Editing the contact data ® For PBAP compatible Bluetooth phones, this function is available when “Automatic Contact/History Transfer”/“Automatic transfer” is set to off. (P. 565) Display “Contact/Call History Settings” screen. (P. 565) Select “Edit Contacts”. Select the desired contact. Select corresponding to the desired name or number.
Page 571 5-23. Phonebook ■ Editing the contacts in a different way (from the “Contact Details” screen) Display the phone top screen. (P. 543) Select the “Contacts”, “Call History”, “Favorites”/“Favourites” tab and select the desired contact. Select “Edit Contact” on the “Contact Details” screen. “E-mail addresses”...
Page 572 5-23. Phonebook Registering the contacts in the favorites list Up to 15 contacts (maximum of 4 numbers per contact) can be regis- tered in the favorites list. Display “Contact/Call History Settings” screen. (P. 565) Select “Add Favorite”/“Add favourite”. Select the desired contact to add to the favorites list.
Page 573 5-23. Phonebook Select contact replaced. Check that a confirmation screen is displayed when the operation is complete. ■ Registering contacts in the favorites list in a different way (from the “Contacts” screen) Display the phone top screen (P. 543) Select the “Contacts” tab. Select at the beginning of the desired contact list name to be registered in the favorites list.
Page 574 5-23. Phonebook Deleting the contacts in the favorites list Display “Contact/Call History Settings” screen. (P. 565) Select “Remove Favorite”/“Remove favourite”. Select the desired contacts and select “Remove”. Select “Yes” when the confirmation screen appears. Check that a confirmation screen is displayed when the operation is complete.
Page 575 5-23. Phonebook Message settings (if equipped) Display the “Telephone/message settings” screen. (P. 562) Select “Messaging settings”. Select the desired item to be set. Select to set automatic message transfer on/off. Select to set automatic message readout on/off. Select to set the SMS/MMS notification popup on/off. Select to set the e-mail notification popup on/off.
Page 576 5-23. Phonebook ■ Displaying the “Messaging settings” screen in a different way Display the phone top screen. (P. 543) Select Select “Settings” on the “Message inbox”. Phone display settings Display the “Phone Settings” screen/“Telephone/message settings” screen. (P. 562) Select “Phone Display Settings”/“Telephone display settings”. Select the desired item to be set.
Page 577: What To Do If
® 5-24. Bluetooth What to do if... (Troubleshooting) ® If there is a problem with the hands-free system or a Bluetooth device, first check the table below. ®  When using the hands-free system with a Bluetooth device ® The hands-free system or Bluetooth device does not work.
Page 578 ® 5-24. Bluetooth  When registering/connecting a cellular phone A cellular phone cannot be registered. An incorrect passcode was entered on the cellular phone.  Enter the correct passcode on the cellular phone. The registration operation has not been completed on the cellular phone side.
Page 579 ® 5-24. Bluetooth  When making/receiving a call A call cannot be made/received. Your vehicle is in a “No Service” area.  Move to where “No Service” no longer appears on the display.  When using the contact list Contact data cannot be transferred manually/automatically. Automatic contact transfer function on this system is set to off.
Page 580 ® 5-24. Bluetooth  In other situations  Vehicles without smart entry & start system ® The Bluetooth connection status is displayed at the top of the screen each time the engine switch is turned to the “ACC” or “ON” position. ...
Page 581: Bluetooth
■ If the following error messages appear on the screen, refer to the table and take the appropriate measures. If the problem is not rectified, take the vehicle to your Toyota dealer. Message Cause/Correction procedures “Music tracks not supported. Please This indicates a problem in the ®...
Page 582 ® 5-24. Bluetooth ■ Conditions under which the system will not operate ® If using a cellular phone that does not support Bluetooth ● If the cellular phone is turned off ● ● If you are outside of cellular phone service coverage If the cellular phone is not connected ●...
Page 583 ® 5-24. Bluetooth ■ About the contacts in this system The following data is stored for every registered cellular phone. When another phone is connecting, you cannot read the registered data. Contact data ● ● Call history data Favorites data ●...
Page 584 ® 5-24. Bluetooth ● Profiles: • A2DP (Advanced Audio Distribution Profile) Ver. 1.0 (Recommended: Ver. 1.2) This is a profile to transmit stereo audio or high quality sound to the audio system. • AVRCP (Audio/Video Remote Control Profile) Ver. 1.0 (Recommended: Ver.
Page 585 ® 5-24. Bluetooth ■ Certification HILUX_OM_OM0K440E_(GE)
Page 586 ® 5-24. Bluetooth HILUX_OM_OM0K440E_(GE)
Page 587 ® 5-24. Bluetooth HILUX_OM_OM0K440E_(GE)
Page 588 ® 5-24. Bluetooth ■ Reconnecting the portable audio player  Vehicles without smart entry & start system If the portable audio player is disconnected due to poor reception when the engine switch is turned to the “ACC” or “ON” position, the system automati- cally reconnects the portable audio player.
Page 589: 5-25. Other Function
5-25. Other function  MirrorLink™ The MirrorLink™ function enables the operation of smartphone contents via the multimedia system. To use this function, a compatible device with a compatible application must be connected to the system. (Compatible devices and applications: P. 590) For safety reasons, the safe driving screen is displayed while driving depending on the application.
Page 590 5-25. Other function Control panel ■ Press the “+” or “-” button to adjust the volume. Control screen ■ Application list screen Operation screen   Select to choose a MirrorLink™ device. Select to change the screen size. Select to display the image quality adjustment screen. Select to return the application list screen.
Page 591 5-25. Other function ■ Compatible devices and applications  Except for Bangla Desh, Afghanistan, Bhutan, Sri Lanka and Nepal Manufacturer Application Applications, which are certified by Smartphones, which passed the Car Car Connectivity Consortium as Connectivity Consortium certification MirrorLink™ Base-Certified or Drive- program Ver.1.1 or later.
Page 592: Usb Photo
5-25. Other function  USB photo Connecting a USB memory device enables you to enjoy photos on the multimedia system. Connecting a USB memory device P. 456 Control screen Press the “MENU” button. Select “USB1 photo” or “USB2 photo”. Select on/off of the slide show setting.
Page 593 Error messages If the following error messages appear on the screen, refer to the table and take the appropriate measures. If the problem is not rectified, take the vehicle to your Toyota dealer. Message Cause/Correction procedures This indicates that no image files are “No image files found.”...
Page 594 5-25. Other function ■ USB memory Compatible devices ● USB memory device that can be used for JPEG display. ● Compatible devices formats The following device format can be used: • USB communication format: USB2.0 FS (480 Mbps) • File system format: FAT16/32 (Windows) •...
Page 595: Smartphone Linking Connected Services
Smartphone linking Connected services is used. Compatible models Depending on type of cellular phone, it may not be supported. For detail, contact your Toyota dealer. If the new Smartphones will be released in the future, the device connectable with a system will be restricted.
Page 596 Select “smart G-Book” or “T-connect”. The displayed switch will be differ depending on the area. For detail, please contact your Toyota dealer. Activate the desired application. ■ About Smartphone linking Connected services For detail information about the services, contact your Toyota dealer. HILUX_OM_OM0K440E_(GE)
Page 597 5-25. Other function HILUX_OM_OM0K440E_(GE)
Page 598: 6-1. Using The Air Conditioning
Interior features 6-1. Using the air conditioning system and defogger Boost ventilator system..598 Manual air conditioning system ......601 Automatic air conditioning system ......607 Heated steering wheel/ seat heaters/ seat ventilators ....615 6-2. Using the interior lights Interior lights list....618 • Personal/interior light main switch....619 •...
Page 599: Boost Ventilator System
6-1. Using the air conditioning system and defogger  Boost ventilator system Boost ventilator controls Adjusting the fan speed setting ■ Turn clockwise (increase) or counterclockwise (decrease). Turning the dial to “OFF” turns off the fan. Changing the air flow mode ■...
Page 600 6-1. Using the air conditioning system and defogger Air outlets Location of air outlets ■ The air outlets and air volume changes according selected air flow mode. Adjusting the air flow direction and opening/closing the air ■ outlets  Center outlets Direct air flow to the left or right, up or down.
Page 601 6-1. Using the air conditioning system and defogger ■ When driving on dusty roads Close all windows. If dust thrown up by the vehicle is still drawn into the vehi- cle after closing the windows, it is recommended that the air intake mode be set to outside air mode and the fan speed to any setting except off.
Page 602: Manual Air Conditioning System
6-1. Using the air conditioning system and defogger  Manual air conditioning system Air conditioning controls Vehicles without heater   Vehicles with heater  : If equipped HILUX_OM_OM0K440E_(GE)
Page 603 6-1. Using the air conditioning system and defogger Adjusting the fan speed setting ■ Turn clockwise (increase) or counterclockwise (decrease). Turning the dial to “OFF” turns off the fan. Adjusting the temperature setting ■ Vehicles without heater  Turn clockwise (cool). ...
Page 604 6-1. Using the air conditioning system and defogger Defogging the windshield (vehicles without heater or with ■ position. Set the outside/recirculated air mode lever to outside air mode if recircu- lated air mode is used. Perform the following operations accordingly: ●...
Page 605 6-1. Using the air conditioning system and defogger Air outlets Location of air outlets ■ The air outlets and air volume changes according selected air flow mode. : Some models Adjusting the air flow direction and opening/closing the air ■ outlets ...
Page 606 6-1. Using the air conditioning system and defogger ■ Fogging up of the windows ● The windows will easily fog up when the humidity in the vehicle is high. Turning (if equipped) on will dehumidify the air from the outlets and defog the windshield effectively.
Page 607 6-1. Using the air conditioning system and defogger WARNING To prevent the windshield from fogging up ■ ● Do not set during cool air operation in extremely humid weather. The difference between the temperature of the outside air and that of the windshield can cause the outer surface of the windshield to fog up, blocking your vision.
Page 608: Automatic Air Conditioning System
6-1. Using the air conditioning system and defogger  Automatic air conditioning system Air outlets and fan speed are automatically adjusted according to the temperature setting. Air conditioning controls This illustration is for a left-hand drive vehicle. Some button positions differ for right-hand drive vehicles.
Page 609 6-1. Using the air conditioning system and defogger Changing the air flow mode ■ Press to change the air outlets. outlets used switched each time the button is pressed. Air flows to the upper body. Air flows to the upper body and feet.
Page 610 6-1. Using the air conditioning system and defogger Other functions Switching between outside air and recirculated air modes ■ Press to switch to recirculated air mode and press switch to outside air mode. Defogging the windshield ■ Press The dehumidification function operates and fan speed increases. Press if the recirculated air mode is used.
Page 611 6-1. Using the air conditioning system and defogger Power heater (if equipped) ■ This feature is used to heat the engine coolant, speed up warming of the cab in cold weather, and keep the cab warm. Press the switch to turn the power heater on/off.
Page 612 6-1. Using the air conditioning system and defogger Air outlets Location of air outlets ■ The air outlets and air volume changes according selected air flow mode. : Some models Adjusting the air flow direction and opening/closing the air ■ outlets ...
Page 613 6-1. Using the air conditioning system and defogger  Rear outlets Direct air flow to the left or right, up or down. Close the vents. ■ Using automatic mode Fan speed is adjusted automatically according to the temperature setting and the ambient conditions.
Page 614 6-1. Using the air conditioning system and defogger ■ Operation of the air conditioning system in Eco drive mode (if equipped) In Eco drive mode, the air conditioning system is controlled as follows to pri- ● oritize fuel efficiency: • Engine speed and compressor operation controlled to restrict heating/ cooling capacity •...
Page 615 6-1. Using the air conditioning system and defogger WARNING To prevent the windshield from fogging up ■ Do not use during cool air operation in extremely humid weather. The ● difference between the temperature of the outside air and that of the wind- shield can cause the outer surface of the windshield to fog up, blocking your vision.
Page 616: Heated Steering Wheel/ Seat Heaters/ Seat Ventilators
6-1. Using the air conditioning system and defogger   Heated steering wheel /seat heaters /seat  ventilators Heated steering wheel and seat heaters heat the side grips of the steering wheel and seats, respectively. Seat ventilators maintain good airflow by sucking air into the seats. WARNING ●...
Page 617 6-1. Using the air conditioning system and defogger Heated steering wheel Turns the steering wheel heater on/off The indicator light comes on when the heater is operating. The heated steering wheel can be used when the engine switch is in the “ON” position (vehicles without smart entry &...
Page 618 6-1. Using the air conditioning system and defogger Seat ventilators Turns on the seat ventilator The indicator light comes on. Adjusts the fan speed The fan speed can be changed between 3 levels. ● The seat ventilators can be used when the engine switch is in the “ON” posi- tion (vehicles without smart entry &...
Page 619: 6-2. Using The Interior Lights
6-2. Using the interior lights Interior lights list Interior light (if equipped) (P. 619) Personal/interior lights (if equipped) (P. 619) Interior light (if equipped) (P. 619) Engine switch light (if equipped) HILUX_OM_OM0K440E_(GE)
Page 620: Personal/Interior Light Main Switch
6-2. Using the interior lights Personal/interior light main switch (if equipped) Door position The personal/interior lights come on when a door is opened. They turn off when the doors are closed. The personal/interior lights can be individually turned on or off. Personal/interior lights (if equipped) On/off Interior light (if equipped)
Page 621 6-2. Using the interior lights ● Illuminated entry system (if equipped):  Vehicles without smart entry & start system The lights automatically turn on/off according to the engine switch position, whether the doors are locked/unlocked, and whether the doors are opened/ closed.
Page 622: Using The Storage Features
6-3. Using the storage features List of storage features Bottle holders (if equipped) Glove box (P. 622) (P. 624) Console box (if equipped) Cup holders (if equipped) (P. 622) (P. 623) Auxiliary boxes (if equipped) (P. 625) HILUX_OM_OM0K440E_(GE)
Page 623: Glove Box
6-3. Using the storage features WARNING Do not leave glasses, lighters or spray cans in the storage spaces, as this ● may cause the following when cabin temperature becomes high: • Glasses may be deformed by heat or cracked if they come into contact with other stored items.
Page 624: Cup Holders
6-3. Using the storage features Cup holders  Type A  Type B (if equipped) Press in and pull the cup holder.  Type C (if equipped)  Type D (if equipped)  Type E (if equipped) Pull the armrest down. HILUX_OM_OM0K440E_(GE)
Page 625: Bottle Holders
6-3. Using the storage features WARNING Do not place anything other than cups or beverage cans in the cup holders. Even when the lid is closed, items must not be stored in the cup holders. Other items may be thrown out of the holders in the event of sudden brak- ing, sudden swerving or an accident, cause injury.
Page 626: Auxiliary Boxes
6-3. Using the storage features Auxiliary boxes  Type A  Type B Press the button. Press in and pull the cup holder, and push the cup tray.  Type C (if equipped)  Type D Press in the lid. The auxiliary box is useful for tem- porarily storing sunglasses and similar small items.
Page 627 6-3. Using the storage features Type G (if equipped)  : The shape of the auxiliary box may differ depending on the grade, etc. Air conditioning-linked temperature regulation function (type A) (if ● equipped): By introducing air from the air conditioning system into the auxiliary box, canned drinks etc.
Page 628 6-3. Using the storage features ● Normal use (type A) (if equipped): Close the air intake lid inside the auxiliary box. ● Items unsuitable for the auxiliary box (type A) (if equipped): • Drinks in unsealed container • Fragile items, perishables or anything with strong odor WARNING ●...
Page 629: Luggage Compartment Features
6-3. Using the storage features Luggage compartment features Deck hooks (if equipped) Deck hooks are provided for securing loose items. HILUX_OM_OM0K440E_(GE)
Page 630: Using The Other Interior
6-4. Using the other interior features Other interior features Sun visors To set the visor in the forward position, flip it down. To set the visor in the side posi- tion, flip down, unhook, and swing it to the side. Vanity mirror (if equipped) Open the cover to use.
Page 631: Clock
6-4. Using the other interior features Clock The clock can be adjusted by pressing the buttons. Adjusts the hours Adjusts the minutes Rounds to the nearest hour : e.g. 1:00 to 1:29  1:00 1:30 to 1:59  2:00 The clock is displayed when: ●...
Page 632: Power Outlets
6-4. Using the other interior features Power outlets (if equipped) The power outlet can be used for the following components: 12 V DC: Please use as a power supply for electronic goods that use less than 12 V DC/10 A (power consumption of 120 W). When using electronic goods, make sure that the power consumption of all the connected power outlets is less than 120 W.
Page 633 6-4. Using the other interior features ● The power outlet can be used when:  Vehicles without smart entry & start system 12 V DC: The engine switch is in the “ACC” or “ON” position. 220 V AC: The engine switch is in the “ON” position. ...
Page 634: Grocery Bag Hooks
6-4. Using the other interior features Grocery bag hooks (if equipped) WARNING Keep the hooks returned in place when not in use. NOTICE Do not hang any object heavier than 4 kg (8.8 lb.). Coat hooks (if equipped) The coat hooks are provided above the back window.
Page 635: Armrest
6-4. Using the other interior features Armrest (if equipped) Fold down the armrest for use. NOTICE To prevent damage to the armrest, do not apply too much load on the arm- rest. HILUX_OM_OM0K440E_(GE)
Page 636: Maintenance And Care
Maintenance and care 7-1. Maintenance and care Cleaning and protecting the vehicle exterior ..636 Cleaning and protecting the vehicle interior ...640 7-2. Maintenance Maintenance requirements....643 Scheduled maintenance ..645 7-3. Do-it-yourself maintenance Do-it-yourself service precautions ......660 Hood ........662 Engine compartment..664 Tires........688 Tire inflation pressure ..698 Wheels.......700 Air conditioning filter ..702...
Page 637: Maintenance And Care Cleaning And Protecting
7-1. Maintenance and care Cleaning and protecting the vehicle exterior Perform the following to protect the vehicle and maintain it in prime condition: ● Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust.
Page 638 7-1. Maintenance and care ■ Aluminum wheels (if equipped) Remove any dirt immediately by using a neutral detergent. ● Wash detergent off with water immediately after use. ● ● To protect the paint from damage, make sure to observe the following pre- cautions.
Page 639 7-1. Maintenance and care NOTICE To prevent paint deterioration and corrosion on the body and compo- ■ nents (aluminum wheels etc.) ● Wash the vehicle immediately in the following cases: • After driving near the sea coast • After driving on salted roads •...
Page 640 7-1. Maintenance and care NOTICE When using a high pressure car wash ■ ● Do not bring the nozzle tip close to boots (rubber or resin manufactured cover), connectors or the following parts. The parts may be damaged if they come into contact with high-pressure water. •...
Page 641: Cleaning And Protecting The Vehicle Interior
7-1. Maintenance and care Cleaning and protecting the vehicle interior The following procedures will help protect your vehicle’s interior and keep it in top condition: Protecting the vehicle interior ● Remove dirt and dust using a vacuum cleaner. Wipe dirty surfaces with a cloth dampened with lukewarm water.
Page 642 7-1. Maintenance and care ■ Caring for leather areas Toyota recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle’s interior. ■ Shampooing the carpets There are several commercial foaming-type cleaners available. Use a sponge or brush to apply the foam.
Page 643 7-1. Maintenance and care NOTICE Cleaning detergents ■ ● Do not use the following types of detergent, as they may discolor the vehi- cle interior or cause streaks or damage to painted surfaces: • Non-seat portions: Organic substances such as benzene or gasoline, alkaline or acidic solutions, dye, and bleach •...
Page 644: Maintenance Maintenance Requirements
● Where to go for maintenance service? It makes good sense to take your vehicle to your local Toyota dealer for maintenance service as well as other inspections and repairs. Toyota technicians are well-trained specialists receiving the latest service information through technical bulletins, service tips and in-dealership train- ing programs.
Page 645 Engine coolant temperature continually higher than normal ● If you notice any of these clues, take your vehicle to your Toyota dealer as soon as possible. Your vehicle may need adjustment or repair. WARNING ■...
Page 646: Scheduled Maintenance
7-2. Maintenance Scheduled maintenance Perform maintenance by the schedule as follows: Maintenance schedule requirements Your vehicle needs to be serviced according to the normal maintenance schedule. (See “Maintenance schedule” [P. 646].) If you mainly operate your vehicle under one or more of the special operating conditions below, some of the maintenance schedule items need to be serviced more frequently in order to keep your vehicle in good condition.
Page 647 7-2. Maintenance Maintenance schedule Maintenance operations: I = Inspect, correct or replace as necessary R = Replace, change or lubricate L = Lubricate T = Tighten to specified torque SERVICE ODOMETER READING INTERVAL: (Odometer x1000 km 10 20 30 40 50 60 70 80 MONTHS reading or months,...
Page 648 7-2. Maintenance Maintenance operations: I = Inspect, correct or replace as necessary R = Replace, change or lubricate L = Lubricate T = Tighten to specified torque SERVICE ODOMETER READING INTERVAL: (Odometer x1000 km 10 20 30 40 50 60 70 80 MONTHS reading or months,...
Page 649 7-2. Maintenance Maintenance operations: I = Inspect, correct or replace as necessary R = Replace, change or lubricate L = Lubricate T = Tighten to specified torque SERVICE ODOMETER READING INTERVAL: (Odometer x1000 km 10 20 30 40 50 60 70 80 MONTHS reading or months,...
Page 650 7-2. Maintenance Maintenance operations: I = Inspect, correct or replace as necessary R = Replace, change or lubricate L = Lubricate T = Tighten to specified torque SERVICE ODOMETER READING INTERVAL: (Odometer x1000 km 10 20 30 40 50 60 70 80 MONTHS reading or months,...
Page 651 7-2. Maintenance Maintenance operations: I = Inspect, correct or replace as necessary R = Replace, change or lubricate L = Lubricate T = Tighten to specified torque SERVICE ODOMETER READING INTERVAL: (Odometer x1000 km 10 20 30 40 50 60 70 80 MONTHS reading or months,...
Page 652 7-2. Maintenance Maintenance operations: I = Inspect, correct or replace as necessary R = Replace, change or lubricate L = Lubricate T = Tighten to specified torque SERVICE ODOMETER READING INTERVAL: (Odometer x1000 km 10 20 30 40 50 60 70 80 MONTHS reading or months,...
Page 653 7-2. Maintenance NOTE: 1. Type A: 1GD-FTV and 2GD-FTV engines for South Africa, Thailand and Azerbaijan Type B: 2GD-FTV engine for Saudi Arabia 2. After 80000 km (48000 miles) or 48 months inspection, inspect every 20000 km (12000 miles) or 12 months. 3.
Page 654 7-2. Maintenance Additional maintenance schedule Refer to the following table for normal maintenance schedule items requiring more frequent service specific to the type of severe condi- tions. (For outline, see “Maintenance schedule requirements” [P. 645].) A-1: Operating on rough or muddy roads, or roads with melted snow. ...
Page 655 7-2. Maintenance A-2: Operating on dusty roads. (Roads in areas where their pavement rate is low, or a cloud of dust often arises and the air is dry.)  Replacement of engine oil Every 5000 km (3000 miles) or (gasoline engine) 6 months ...
Page 656 7-2. Maintenance A-2: Operating on dusty roads. (Roads in areas where their pavement rate is low, or a cloud of dust often arises and the air is dry.)  Inspection of brake linings and Every 10000 km (6000 miles) or drums (including parking brake 6 months linings and drums)
Page 657 7-2. Maintenance B-1: Heavily loaded vehicle. (Example: Towing a trailer [with towing hitch], using a camper, using a car top carrier, etc.)  Replacement of engine oil Every 5000 km (3000 miles) or (gasoline engine) 6 months  1GD-FTV and 2GD-FTV engines for South Africa, Thailand and Azerbaijan ...
Page 658 7-2. Maintenance B-1: Heavily loaded vehicle. (Example: Towing a trailer [with towing hitch], using a camper, using a car top carrier, etc.) I: Every 40000 km (24000 miles) or  Inspection or replacement of 24 months automatic transmission fluid R: Every 80000 km (48000 miles) or 48 months ...
Page 659 7-2. Maintenance B-3: Extensive idling and/or low speed driving for a long distance such as police, professional/private use like taxi or door-to-door delivery use.  Replacement of engine oil Every 5000 km (3000 miles) or (gasoline engine) 6 months  1GD-FTV and 2GD-FTV engines for South Africa, Thailand and Azerbaijan...
Page 660 7-2. Maintenance NOTE: 1. Lubricate within 24 hours after submerging. 2. With grease fitting only. 3. For seat mounting bolts, suspension member retaining bolts and leaf springs retaining U bolts. HILUX_OM_OM0K440E_(GE)
Page 661: Do-It-Yourself Maintenance Do-It-Yourself Service
Battery condition • Conventional wrench (for terminal clamp bolts) (P. 674) • Distilled water • “Toyota Super Long Life Coolant” or a similar high quality ethylene glycol-based non-silicate, non- amine, non-nitrite and non-borate coolant with long- Engine coolant life hybrid organic acid technology level (P.
Page 662 7-3. Do-it-yourself maintenance WARNING The engine compartment contains many mechanisms and fluids that may move suddenly, become hot, or become electrically energized. To avoid death or serious injury, observe the following precautions. ■ When working on the engine compartment Keep hands, clothing and tools away from the moving fan and engine ●...
Page 663: Hood
7-3. Do-it-yourself maintenance Hood Release the lock from the inside of the vehicle to open the hood. Pull the hood lock release lever. The hood will pop up slightly. Pull up the auxiliary catch lever and lift the hood. Hold the hood open by inserting the supporting rod into either of the slots.
Page 664 7-3. Do-it-yourself maintenance WARNING Pre-driving check ■ Check that the hood is fully closed and locked. If the hood is not locked properly, it may open while the vehicle is in motion and cause an accident, which may result in death or serious injury. After installing the support rod into the slot ■...
Page 665: Engine Compartment
7-3. Do-it-yourself maintenance Engine compartment  1GR-FE engine Air cleaner (P. 679) Fuse box (P. 707) Engine oil level dipstick Battery (P. 674) (P. 668) Washer fluid tank (P. 678) Engine coolant reservoir Condenser (P. 673) (P. 672) Radiator (P. 673) Engine oil filler cap (P.
Page 666 7-3. Do-it-yourself maintenance  1TR-FE and 2TR-FE engines Air cleaner (P. 679) Fuse box (P. 707) Engine coolant reservoir Battery (P. 674) (P. 672) Washer fluid tank (P. 678) Engine oil level dipstick Condenser (if equipped) (P. 668) (P. 673) Engine oil filler cap (P.
Page 667 7-3. Do-it-yourself maintenance  1GD-FTV and 2GD-FTV engines Air cleaner (P. 679) Fuse box (P. 707) Engine coolant reservoir Battery (P. 674) (P. 672) Washer fluid tank (P. 678) Engine oil filler cap (P. 670) Intercooler (P. 673) Engine oil level dipstick Radiator (P.
Page 668 7-3. Do-it-yourself maintenance  5L-E engine Air cleaner (P. 679) Fuse box (P. 707) Engine coolant reservoir Battery (P. 674) (P. 672) Washer fluid tank (P. 678) Engine oil filler cap (P. 670) Condenser (if equipped) Engine oil level dipstick (P.
Page 669 7-3. Do-it-yourself maintenance Engine oil With the engine at operating temperature and turned off, check the oil level on the dipstick. Checking the engine oil ■ Park the vehicle on level ground. After warming up the engine and turning it off, wait more than 5 minutes for the oil to drain back into the bottom of the engine.
Page 670 7-3. Do-it-yourself maintenance Holding a rag under the end, pull the dipstick out and check the oil level.  Type A  Type B Excessive Normal The shape of the dipstick may differ depending on the type of vehicle or engine.
Page 671 7-3. Do-it-yourself maintenance Adding engine oil ■ If the oil level is below or near the low level mark, add engine oil of the same type as that already in the engine. Make sure to check the oil type and prepare the items needed before adding oil.
Page 672 ● not dispose of used oil and filters in household trash, in sewers or onto the ground. Call your Toyota dealer, service station or auto parts store for information concerning recycling or disposal. Do not leave used engine oil within the reach of children.
Page 673 “Toyota Super Long Life Coolant” is a mixture of 50% coolant and 50% deion- ized water. (Minimum temperature: -35C [-31F]) For more details about engine coolant, contact your Toyota dealer.
Page 674 If the coolant level drops within a short time of replenishing Visually check the radiator, hoses, engine coolant reservoir cap, drain cock and water pump. If you cannot find a leak, have your Toyota dealer test the cap and check for leaks in the cooling system.
Page 675 7-3. Do-it-yourself maintenance Battery Check the battery as follows. Caution symbols ■ The meanings of each caution symbol on the top of the battery are as follows: No smoking, no naked Battery acid flames, no sparks Note operating Shield eyes instructions Keep away from Explosive gas...
Page 676 7-3. Do-it-yourself maintenance Checking battery fluid (vehicles with maintenance type bat- ■ tery) If there are lines on the side of the battery: Check that the fluid level is between the upper and lower lines. Upper line Lower line If the fluid level is at or below the lower line, add distilled water.
Page 677 Make sure to turn off the engine before disconnect the battery. Take extra care when connecting the battery if the engine switch mode prior to discharge is unknown. If the system will not start even after multiple attempts, contact your Toyota dealer. ■...
Page 678 7-3. Do-it-yourself maintenance WARNING Chemicals in the battery ■ Batteries contain poisonous and corrosive sulfuric acid and may produce hydrogen gas which is flammable and explosive. To reduce the risk of death or serious injury, take the following precautions while working on or near the battery: Do not cause sparks by touching the battery terminals with tools.
Page 679 7-3. Do-it-yourself maintenance NOTICE When recharging the battery ■ Never recharge the battery while the engine is running. Also, be sure all accessories are turned off. When adding distilled water (vehicles with maintenance type battery) ■ Avoid overfilling. Water spilled during battery recharging may cause corro- sion.
Page 680 7-3. Do-it-yourself maintenance Air cleaner filter Check the air cleaner filter as follows: Release the 4 clips. Lift the cover and take out the air cleaner filter. Inspect the outer surface of the fil- ter, and replace the filter if it is extremely dirty.
Page 681 7-3. Do-it-yourself maintenance NOTICE To prevent damaging the engine ■ Do not start the engine with the air cleaner filter removed. Doing so may causes excessive engine wear. To prevent damage to the system ■ Do not clean the air cleaner filter with water. ■...
Page 682 Fuel filter (diesel engine only) You may drain the fuel filter yourself. However, as the operation is dif- ficult, we recommend having it drained by your Toyota dealer. Even if you decide to drain it yourself, contact your Toyota dealer.
Page 683 After draining, tighten the drain plug by hand. For EURO VI models with 2GD-FTV engine: Install the fuel filter to the bracket again. : EURO VI is an emission standard. If it is not clear that your vehicle meets relevant standards, contact your Toyota dealer. HILUX_OM_OM0K440E_(GE)
Page 684 ● If AdBlue™ is accidentally spilled while refilling, vehicle parts, paint, etc. may be damaged. When AdBlue™ needs to be refilled, have it refilled at your Toyota dealer. It may be a criminal offence to use a vehicle that does not consume any reagent if it is required for the reduction of emissions.
Page 685 Toyota dealer immedi- ately. NOTICE When the AdBlue™ level is low ■ When AdBlue™ is depleted, the engine cannot be restarted. Be sure to have AdBlue™ refilled at your Toyota dealer before it is com- pletely depleted. HILUX_OM_OM0K440E_(GE)
Page 686 7-3. Do-it-yourself maintenance Refilling AdBlue™ by yourself in an emergency ■ When the engine cannot be restarted due to the depletion of AdBlue™, adding approximately 5.0 L (5.3 qt., 4.4 Imp.qt.) or more of AdBlue™ will allow the engine to be started again. Perform the following procedures to refill AdBlue™.
Page 687 7-3. Do-it-yourself maintenance  Refilling with the bottle Park the vehicle on a level surface, turn the engine switch off, and then open the hood. (P. 662) Open the AdBlue™ tank cap. Insert a bottle of AdBlue™ and fully tighten it. Push down on the bottle.
Page 688 7-3. Do-it-yourself maintenance Close the AdBlue™ tank cap. Turn the cap until you hear a click. Check that the engine starts. The way of refilling may differ from those shown in the illustration. When refilling AdBlue™ ■ After refilling AdBlue™, the engine may take a few seconds longer than nor- mal to start.
Page 689: Tires
7-3. Do-it-yourself maintenance Tires Replace or rotate tires in accordance with maintenance sched- ules and treadwear. Checking tires Check if the treadwear indicators are showing on the tires. Also check the tires for uneven wear, such as excessive wear on one side of the tread.
Page 690 Front Front To equalize tire wear and help extend tire life, Toyota recommends that tire rotation is carried out approximately every 10000 km (6000 miles). Do not fail to initialize the tire pressure warning system after tire rotation.
Page 691 ID codes must be registered in the tire pressure warning computer and the tire pressure warning system must be initialized. Have tire pressure warning valves and transmitter ID codes registered by your Toyota dealer. (P. 691) ◆ Initializing the tire pressure warning system The tire pressure warning system must be initialized in the fol- ■...
Page 692 The tire pressure warning valve and transmitter is equipped with a unique ID code. When replacing a tire pressure warning valve and transmitter, it is necessary to register the ID code. Have the ID code registered by your Toyota dealer. HILUX_OM_OM0K440E_(GE)
Page 693 A tire goes flat repeatedly or cannot be properly repaired due to the size or ● location of a cut or other damage If you are not sure, consult with your Toyota dealer. Replacing tires and wheels (vehicles with tire pressure warning system) ■...
Page 694 In the following cases, the tire pressure warning system may not operate ● properly. • If non-genuine Toyota wheels are used. • A tire has been replaced with a tire that is not an OE (Original Equipment) tire. • A tire has been replaced with a tire that is not of the specified size.
Page 695 If repeated attempts to record tire inflation pressure settings are unsuccessful, have the vehicle inspected by your Toyota dealer. When operating the tire pressure warning reset switch, the tire pressure ●...
Page 696 7-3. Do-it-yourself maintenance ■ Certification for tire pressure warning system  For the United Arab Emirates  For Jordan HILUX_OM_OM0K440E_(GE)
Page 697 Do not mix tires of different makes, models or tread patterns. ● Also, do not mix tires of remarkably different treadwear. ● Do not use tire sizes other than those recommended by Toyota. ● Do not mix differently constructed tires (radial, bias-belted or bias-ply tires).
Page 698 When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact your Toyota dealer or other qualified service shop as soon as possible. After use of liquid sealant, make sure to replace the tire pressure warning valve and transmitter when repairing or replacing the tire.
Page 699: Tire Inflation Pressure
Reduced safety ● ● Damage to the drive train If a tire needs frequent inflating, have it checked by your Toyota dealer. Instructions for checking tire inflation pressure ■ When checking tire inflation pressure, observe the following: Check only when the tires are cold.
Page 700 7-3. Do-it-yourself maintenance WARNING Proper inflation is critical to save tire performance ■ Keep your tires properly inflated. If the tires are not properly inflated, the following conditions may occur which could lead to an accident resulting in death or serious injury: Excessive wear ●...
Page 701: Wheels
● Used wheels ● Bent wheels that have been straightened Aluminum wheel precautions (if equipped) ● Use only Toyota wheel nuts and wrenches designed for use with your aluminum wheels. ● When rotating, repairing or changing your tires, check that the wheel nuts are still tight after driving 1600 km (1000 miles).
Page 702 ● Because tire repair or replacement may affect the tire pressure warning valves and transmitters, make sure to have tires serviced by your Toyota dealer or other qualified service shop. In addition, make sure to purchase your tire pressure warning valves and transmitters at your Toyota dealer.
Page 703: Air Conditioning Filter
7-3. Do-it-yourself maintenance Air conditioning filter The air conditioning filter must be changed regularly to maintain air conditioning efficiency. Removal method Vehicles without smart entry & start system: Turn the engine switch to the “LOCK” position. Vehicles with smart entry & start system: Turn the engine switch off. Open the glove box.
Page 704 7-3. Do-it-yourself maintenance Pull damper equipped) as shown in the illus- tration, and then remove the glove box. Remove the filter cover. Remove the air conditioning fil- ter and replace it with a new one. The “UP” marks shown on the fil- ter should be pointing up.
Page 705: Wireless Remote Control/Electronic Key Battery
7-3. Do-it-yourself maintenance  Wireless remote control/electronic key battery Replace the battery with a new one if it is depleted. You will need the following items: ● Flathead screwdriver ● Small flathead screwdriver ● Lithium battery Vehicles without smart entry & start system: CR1620 Vehicles with smart entry &...
Page 706 7-3. Do-it-yourself maintenance Remove the depleted battery. Insert a new battery with the “+” terminal facing up. Vehicles with smart entry & start system  Take out the mechanical key. Remove the cover. To prevent damage to the key, cover the tip of the screwdriver with a rag.
Page 707 Vehicles without smart entry & start system: CR1620 Vehicles with smart entry & start system: CR2032 ● Batteries can be purchased at your Toyota dealer, local electrical appliance shops or camera stores. Replace only with the same or equivalent type recommended by the manu- ●...
Page 708: Checking And Replacing Fuses
7-3. Do-it-yourself maintenance Checking and replacing fuses If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as nec- essary. Vehicles without smart entry & start system: Turn the engine switch to the “LOCK” position. Vehicles with smart entry &...
Page 709 7-3. Do-it-yourself maintenance  Under the instrument panel (right-hand drive vehicles) Remove the cover (if equipped). Remove the lid.  Behind the instrument panel (left-hand drive vehicles) Remove the glove box (P. 702), and remove the lid. Behind the instrument panel (right-hand drive vehicles) ...
Page 710 7-3. Do-it-yourself maintenance  Behind the cowl side panel Remove the driver’s door scuff plate (left-hand drive vehicles) or the front passenger’s door scuff plate (right-hand drive vehicles). Remove the nut and the cowl side panel. Remove the fuse. Only type A fuse can be removed using the pullout tool.
Page 711 Type A, B, C and D: Replace the blown fuse with a new fuse of an appropriate amperage rat- ing. The amperage rating can be found on the fuse box lid. Type E: Contact your Toyota dealer.  Type A ...
Page 712 If the lights do not turn on even after the fuse has been replaced, a bulb may need replacement. (P. 712) ● If the replaced fuse blows again, have the vehicle inspected by your Toyota dealer. If there is an overload in a circuit ■...
Page 713: Light Bulbs
As there is a danger that components may be damaged, we recommend that replacement is carried out by your Toyota dealer. Preparing for light bulb replacement Check the wattage of the light bulb to be replaced. (P. 843)
Page 714 7-3. Do-it-yourself maintenance  Vehicles with LED headlights Headlight (high beam) Halogen front fog light Front turn signal light : If equipped Rear ■ Rear fog light Rear fog light (left-hand drive vehicles) (right-hand drive vehicles) or back-up light or back-up light License plate light Rear turn signal light Stop/tail light...
Page 715 7-3. Do-it-yourself maintenance Replacing light bulbs Headlight high/low beams (vehicles with halogen headlights) ■ Unplug the connector and remove the rubber cover. Release the bulb retaining spring. Remove the bulb. To install a new bulb, align the tabs of the bulb with the cutouts of the mounting hole.
Page 716 7-3. Do-it-yourself maintenance Turn the bulb base counter- clockwise. Replace the light bulb, and install the bulb base. Align the 3 tabs on the light bulb with the mounting, and insert. Turn and secure the bulb base. Install the connector Shake the bulb base gently to check that it is not loose, turn the headlight high beams on...
Page 717 7-3. Do-it-yourself maintenance Front position lights/daytime running lights (if equipped) ■ (vehicles with halogen headlights [except models made in Argentina Turn the bulb base counterclockwise.  Vehicles without daytime run-  Vehicles with daytime running ning lights lights Remove the light bulb. Vehicles without daytime run- Vehicles with daytime running ...
Page 718 7-3. Do-it-yourself maintenance Front position lights/daytime running lights (if equipped) ■ (vehicles with halogen headlights [models made in Argen- tina Turn the bulb base counterclockwise.  Vehicles without daytime running lights Headlight units made by other Headlight units made than “Valeo” “Valeo”...
Page 719 7-3. Do-it-yourself maintenance Remove the light bulb. Vehicles without daytime running lights  Headlight units made by other Headlight units made than “Valeo” “Valeo” Vehicles with daytime running lights  When installing, reverse the steps listed. : See “Checking your vehicle’s model” if you are not sure of which model your vehicle is.
Page 720 7-3. Do-it-yourself maintenance Front turn signal lights ■ Vehicles with halogen headlights  Turn the bulb base counter- clockwise. Remove the light bulb. When installing, reverse the steps listed.  Vehicles with LED headlights To allow enough working space, turn steering wheel to the opposite side where...
Page 721 7-3. Do-it-yourself maintenance Removing the clip Installing the clip Type A Type B   Partly remove the fender liner and turn the bulb base counterclockwise. Fender liner Bumper Remove the light bulb. When installing, reverse the steps listed. HILUX_OM_OM0K440E_(GE)
Page 722 7-3. Do-it-yourself maintenance Halogen front fog lights (if equipped) ■ To allow enough working space, turn the steering wheel to the opposite side where the bulb to be replaced is located. Remove the screws and clips. Vehicles without steel bumper Vehicles with steel bumper ...
Page 723 7-3. Do-it-yourself maintenance Partly remove the fender liner and unplug the connector while pressing the lock release.  Vehicles without steel bumper  Vehicles with steel bumper Fender liner Bumper Turn the bulb base counter- clockwise. Replace the light bulb, and install the bulb base.
Page 724 7-3. Do-it-yourself maintenance Turn and secure the bulb base. Install the connector. Shake the bulb base gently to check that it is not loose, turn the front fog lights on once and visually confirm that no light is leaking through the mounting. When installing the fender liner, screws and clips, reverse the removing procedure in steps HILUX_OM_OM0K440E_(GE)
Page 725 7-3. Do-it-yourself maintenance Stop/tail lights, rear turn signal lights, back-up lights and rear ■ fog light (if equipped) Remove the securing bolts and pull the unit sideways to remove. Turn the bulb base counter- clockwise. Stop/tail light Rear turn signal light Back-up light or rear fog light Remove the light bulb.
Page 726 Replacing the following bulbs ■ If any of the lights listed below has burnt out, have it replaced by your Toyota dealer. ● Headlight low beams (vehicles with LED headlights) ● Front position lights/daytime running lights (if equipped) (vehicles with LED headlights) ●...
Page 727 (mirror mounted type), LED front fog lights (if equipped) and high mounted stoplight (if equipped) consists of a number of LEDs. If any of the LEDs burn out, take your vehicle to your Toyota dealer to have the light replaced.
Page 728 7-3. Do-it-yourself maintenance WARNING Replacing light bulbs ■ ● Turn off the lights. Do not attempt to replace the bulb immediately after turning off the lights. The bulbs become very hot and may cause burns. Do not touch the glass portion of the light bulb with bare hands. When it is ●...
Page 729 7-3. Do-it-yourself maintenance HILUX_OM_OM0K440E_(GE)
Page 730: When Trouble Arises
When trouble arises 8-1. Essential information Emergency flashers ...730 If your vehicle has to be stopped in an emergency.......731 8-2. Steps to take in an emergency If your vehicle needs to be towed ......733 If you think something is wrong.......739 Fuel pump shut off system (gasoline engine only) .....740...
Page 731: Essential Information
8-1. Essential information Emergency flashers The emergency flashers are used to warn other drivers when the vehicle has to be stopped in the road due to a breakdown, etc. Press the switch. All the turn signal lights will flash. To turn them off, press the switch once again.
Page 732: If Your Vehicle Has To Be Stopped In An Emergency
8-1. Essential information If your vehicle has to be stopped in an emergency Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way, stop the vehicle using the follow- ing procedure: Steadily step on the brake pedal with both feet and firmly depress it. Do not pump the brake pedal repeatedly as this will increase the effort required to slow the vehicle.
Page 733 8-1. Essential information WARNING If the engine has to be turned off while driving ■ ● Power assist for the brakes and steering wheel will be lost, making the brake pedal harder to depress and the steering wheel heavier to turn. Decelerate as much as possible before turning off the engine.
Page 734: Steps To Take In An
If your vehicle needs to be towed If towing is necessary, we recommend having your vehicle towed by your Toyota dealer or commercial towing service, using a wheel-lift type truck or flatbed truck. Use a safety chain system for all towing, and abide by all state/ provincial and local laws.
Page 735 8-2. Steps to take in an emergency Towing with a wheel-lift type truck  From the front  From the rear Use a towing dolly under the rear Use a towing dolly under the wheels. front wheels. HILUX_OM_OM0K440E_(GE)
Page 736 8-2. Steps to take in an emergency Using a flatbed truck If your vehicle is transported by a flatbed truck, it should be tied down at the locations shown in the illustrations. 2WD models 4WD models and Pre Runner  ...
Page 737 8-2. Steps to take in an emergency Emergency towing If a tow truck is not available in an emergency, your vehicle may be temporarily towed using cables or chains secured to the emergency towing hooks. This should only be attempted on hard surfaced roads for at most 80 km (50 miles) at under 30 km/h (18 mph).
Page 738 8-2. Steps to take in an emergency ■ While towing If the engine is not running, the power assist for the brakes and steering will not function, making steering and braking more difficult. WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■...
Page 739 8-2. Steps to take in an emergency NOTICE To prevent damage to the vehicle when towing using a wheel-lift type ■ truck ● Do not tow the vehicle from the rear when the engine switch is in the “LOCK” position or the key is removed (vehicles without smart entry & start system) or the engine switch is turned to off (vehicles with smart entry &...
Page 740: If You Think Something Is Wrong
8-2. Steps to take in an emergency If you think something is wrong If you notice any of the following symptoms, your vehicle proba- bly needs adjustment or repair. Contact your Toyota dealer as soon as possible. Visible symptoms ● Fluid leaks under the vehicle.
Page 741: Fuel Pump Shut Off System (Gasoline Engine Only)
8-2. Steps to take in an emergency Fuel pump shut off system (gasoline engine only) To minimize the risk of fuel leakage when the engine stalls or when an airbag inflates upon collision, the fuel pump shut off system stops the supply of fuel to the engine. Follow the procedure below to restart the engine after the system is activated.
Page 742: Fire Extinguisher
Replace it with a new one as soon as possible after using it. ● Use a genuine Toyota fire extinguisher when replacing. If a non-genuine Toyota fire extinguisher is used, it may not be possible to secure the fire extinguisher properly and it may come loose. ...
Page 743: If A Warning Light Turns On Or A Warning Buzzer Sounds
• Low negative pressure in the vacuum tank (diesel engine)  Immediately stop the vehicle in a safe place and con- tact your Toyota dealer. Continuing to drive the vehi- cle may be dangerous. Charging system warning light (if equipped) Indicates a malfunction in the vehicle’s charging system...
Page 744 • The boost pressure in the turbocharger is abnormally high. (diesel engine other than 5L-E engine) • Malfunction in DPF system. (if equipped)  Have the vehicle inspected by your Toyota dealer immediately. SRS warning light Indicates a malfunction in: •...
Page 745 Indicates a malfunction in the four-wheel drive system when the light flashes rapidly and a buzzer does not sound.  Have the vehicle inspected by your Toyota dealer immediately. Low speed four-wheel drive indicator light (if equipped) Indicates a malfunction in the four-wheel drive system when the light flashes rapidly.
Page 746 If the engine is operated with biodiesel mixed fuel with more than 5% FAME (B5), fuel filter replacement intervals tend to become shorter.  Have the vehicle inspected by your Toyota dealer immediately. DPF system warning light (warning buzzer) (if equipped)
Page 747 8-2. Steps to take in an emergency Warning light Warning light/Details/Actions Open door warning light (warning buzzer) equipped) Indicates that a door is not fully closed  Check that all the doors are closed. Driver’s and front passenger’s seat belt reminder light (warning buzzer) Warns the driver and front passenger to fasten his/her seat belt...
Page 748 Indicates a malfunction in the Stop & Start system (The Stop & Start cancel indicator will come on when the system is canceled: P. 332)  Have the vehicle inspected by your Toyota dealer (Flashes) immediately. Parking brake indicator light (warning buzzer) Warns the driver to release parking brake.
Page 749 8-2. Steps to take in an emergency : The buzzer sounds if the vehicle reaches a speed of 5 km/h (3 mph). : Slow down until the lamp goes off. : The buzzer sounds when the differential oil temperature is too high and turning the front-wheel drive control switch to H2 is required.
Page 750 If the fuel tank is empty, refuel the vehicle imme- diately. The malfunction indicator lamp will go off after several trips. If the malfunction indicator lamp does not go off, contact your Toyota dealer as soon as possible.
Page 751 If the tire pressure warning light frequently comes on after blinking for 1 minute (if equipped) If the tire pressure warning light frequently comes on after blinking for 1 min- ute when the engine switch is turned on, have it checked by your Toyota dealer. ■...
Page 752 If both the ABS and the brake system warning lights remain on ■ Stop your vehicle in a safe place immediately and contact your Toyota dealer. The vehicle will become extremely unstable during braking, and the ABS system may fail, which could cause an accident resulting in death or serious injury.
Page 753: If A Warning Message Is Displayed
Multi-information display Handling method Follow the instructions of the message on the multi-information display. If any of the warning messages comes on again after the following actions have been performed, contact your Toyota dealer.  : If equipped HILUX_OM_OM0K440E_(GE)
Page 754 Messages and warnings The warning lights and warning buzzers operate as follows depending on the content of the message. If a message indicates the need for inspection by a dealer, have the vehicle inspected by your Toyota dealer immediately. System...
Page 755 Move to a level surface and check to see if the message goes off.) Immediately stop the vehicle in a safe place and contact your Toyota dealer. Continuing to drive the vehicle may be dangerous.
Page 756 If “Oil Pressure Low Stop in a Safe Place” is shown, there may be a mal- ● function. Immediately stop the vehicle in a safe place and contact your Toyota dealer. Continuing to drive the vehicle may be dangerous. ■...
Page 757 8-2. Steps to take in an emergency WARNING If a warning light comes on or a warning buzzer sounds when a warn- ■ ing message is shown on the multi-information display Check and follow the message shown on the multi-information display. Failure to do so may result in death or serious injury.
Page 758: If You Have A Flat Tire
8-2. Steps to take in an emergency If you have a flat tire Your vehicle is equipped with a spare tire. The flat tire can be replaced with the spare tire. For details about tires: P. 688 WARNING ■ If you have a flat tire Do not continue driving with a flat tire.
Page 759 8-2. Steps to take in an emergency Location of the jack and tools  Single-cab models The jack and tools are stored behind the seat.  Smart-cab models The jack and tools are stored under the lid. Double-cab models  The jack and tools are stored under the bottom cushion.
Page 760 8-2. Steps to take in an emergency WARNING Using the tire jack ■ Improper use of the tire jack may cause the vehicle to suddenly fall off the jack, leading to death or serious injury. Do not use the tire jack for any purpose other than replacing tires or install- ●...
Page 761 8-2. Steps to take in an emergency Taking out the jack and tool bag  Single-cab models Unhook the strap and take out the tool bag. Take out the jack. For loosening For tightening HILUX_OM_OM0K440E_(GE)
Page 762 8-2. Steps to take in an emergency  Smart-cab models  Vehicles with rear seat cushions: Remove the rear seat cushions. (P. 202) Pull the tag and open the lid. Unhook the strap and take out the tool bag. Take out the jack. For loosening For tightening HILUX_OM_OM0K440E_(GE)
Page 763 8-2. Steps to take in an emergency  Double-cab models Tumbling the bottom cushion (P. 202) Open the lid. Take out the tool bag. Take out the jack. For loosening For tightening HILUX_OM_OM0K440E_(GE)
Page 764 8-2. Steps to take in an emergency Taking out the spare tire Assemble the jack handle end, jack handle extensions and wheel nut wrench. To assemble the jack handle extension and wheel nut wrench, push in the projection on the jack handle extension.
Page 765 8-2. Steps to take in an emergency Replacing a flat tire Chock the tires. Flat tire Wheel chock positions Left-hand side Behind the rear right-hand side tire Front Right-hand side Behind the rear left-hand side tire Left-hand side In front of the front right-hand side tire Rear Right-hand side In front of the front left-hand side tire...
Page 766 8-2. Steps to take in an emergency Type C  Slightly loosen the wheel nuts (one turn). Assembling the jack handle. (P. 763) Position the jack at the jack points as shown. Front (except models made in Argentina  2WD models: Under the front side rail 4WD models and Pre Runner (Raised Body):...
Page 767 8-2. Steps to take in an emergency  Front (models made in Argentina Under the cross member Rear  Under the rear axle housing : See “Checking your vehicle’s model” if you are not sure of which model your vehicle is. (P. 12) Raise the vehicle until the tire is slightly raised off the ground.
Page 768 • If there are any cracks or deformations in the bolt screws, nut threads or bolt holes of the wheel, have the vehicle inspected by your Toyota dealer. • When installing the wheel nuts, be sure to install them with the tapered ends facing inward.
Page 769 8-2. Steps to take in an emergency Installing the spare tire Remove any dirt or foreign mat- ter from the wheel contact sur- face. If foreign matter is on the wheel contact surface, the wheel nuts may loosen while the vehicle is in motion, causing the tire to come off.
Page 770 8-2. Steps to take in an emergency Lower the vehicle. Firmly tighten each wheel nut two or three times in the order shown in the illustration.  2WD models Tightening torque: Steel wheels 152 N•m (15.5 kgf•m, 112 ft•lbf) Aluminum wheels 121 N•m (12.3 kgf•m, 89 ft•lbf) 4WD models and Pre Runner (Raised Body) ...
Page 771 8-2. Steps to take in an emergency Vehicles with spare tire of the same wheel type as the installed tires: Reinstall the wheel ornament.  Type A Align the cutout of the wheel orna- ment with the valve stem as shown.
Page 772 8-2. Steps to take in an emergency  Type D WARNING Stowing the flat tire ■ Failure to follow steps listed under stowing the tire may result in damage to the spare tire carrier and loss of the tire, which could result in death or seri- ous injury.
Page 773 8-2. Steps to take in an emergency Raise the tire. While raising, secure the tire, tak- ing care that the tire goes straight up without catching on any sur- rounding part, to prevent it from fly- ing forward during a collision or sudden braking.
Page 774 When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact your Toyota dealer or other qualified service shop as soon as possible. Make sure to replace the tire pressure warning valve and transmitter when replacing the tire.
Page 775: If The Engine Will Not Start
8-2. Steps to take in an emergency If the engine will not start If the engine will not start even though correct starting proce-  dures are being followed ( P. 250, 253), consider each of the following points: The engine will not start even though the starter motor operates normally.
Page 776 ● There may be a malfunction in the steering lock system. (vehicles with smart entry & start system) Contact your Toyota dealer if the problem cannot be repaired, or if repair procedures are unknown. Emergency start function (vehicles with smart entry & start sys-...
Page 777: If The Electronic Key Does Not Operate Properly (Vehicles With Smart Entry & Start System)
8-2. Steps to take in an emergency If the electronic key does not operate properly (vehicles with smart entry & start system) If communication between the electronic key and vehicle is interrupted (P. 195) or the electronic key cannot be used because the battery is depleted, the smart entry &...
Page 778 ACCESSORY mode. Firmly depress the brake pedal. A message indicating how to start the engine will be displayed on the multi-information display. Press the engine switch. In the event that the engine still cannot be started, contact your Toyota dealer. HILUX_OM_OM0K440E_(GE)
Page 779 ACCESSORY mode. Firmly depress the clutch pedal. A message indicating how to start the engine will be displayed on the multi-information display. Press the engine switch. In the event that the engine still cannot be started, contact your Toyota dealer. HILUX_OM_OM0K440E_(GE)
Page 780 8-2. Steps to take in an emergency ■ Stopping the engine Shift the shift lever to P (automatic transmission) or N (manual transmission) and press the engine switch as you normally do when stopping the engine. ■ Replacing the key battery As the above procedure is a temporary measure, it is recommended that the electronic key battery be replaced immediately when the battery is depleted.
Page 781: If The Vehicle Battery Is Discharged
The following procedures may be used to start the engine if the vehicle’s battery is discharged. You can also call your Toyota dealer or a qualified repair shop. If you have a set of jumper (or booster) cables and a second vehicle with a 12-volt battery, you can jump start your vehicle by following the steps below.
Page 782 8-2. Steps to take in an emergency  1TR-FE and 2TR-FE engines  1GD-FTV and 2GD-FTV engines HILUX_OM_OM0K440E_(GE)
Page 783 8-2. Steps to take in an emergency  5L-E engine HILUX_OM_OM0K440E_(GE)
Page 784 Once the vehicle’s engine has started, remove the jumper cables in the exact reverse order from which they were connected. Once the engine starts, have the vehicle inspected at your Toyota dealer as soon as possible. Starting the engine when the battery is discharged (vehicles with auto- ■...
Page 785 If an unsupported battery is used, Stop & Start system functions may be restricted to protect the battery. Also, battery performance may decrease and the engine may not be able to restart. Contact your Toyota dealer for details. ● For details, consult your Toyota dealer.
Page 786 8-2. Steps to take in an emergency WARNING When removing the battery terminals ■ Always remove the negative (-) terminal first. If the positive (+) terminal con- tacts any metal in the surrounding area when the positive (+) terminal is removed, a spark may occur, leading to a fire in addition to electrical shocks and death or serious injury.
Page 787 When the vent plug and indicator are close to the hold down bracket, the battery fluid (sulfuric acid) may leak. For information regarding battery replacement, contact your Toyota dealer. ● To prevent damage to the vehicle (vehicles with manual transmission) ■...
Page 788: If Your Vehicle Overheats
If you do not see steam: Carefully lift the hood. After the engine has cooled down sufficiently, inspect the hoses and radiator core (radiator) for any leaks. Radiator Cooling fan If a large amount of coolant leaks, immediately contact your Toyota dealer. HILUX_OM_OM0K440E_(GE)
Page 789 8-2. Steps to take in an emergency The coolant level is satisfactory if it is between the “F” and “L” lines on the reservoir. Reservoir “F” line “L” line Radiator cap (if equipped)  1GR-FE engine  1TR-FE and 2TR-FE engines 1GD-FTV and 2GD-FTV 5L-E engine ...
Page 790 Start the engine to check that the radiator cooling fan operates and to check for coolant leaks from the radiator or hoses. If the fan is not operating: Stop the engine immediately and contact your Toyota dealer. If the fan is operating: Have the vehicle inspected at the nearest Toyota dealer.
Page 791 8-2. Steps to take in an emergency WARNING When inspecting under the hood of your vehicle ■ Observe the following precautions. Failure to do so may result in serious injury such as burns. If steam is seen coming from under the hood, do not open the hood until ●...
Page 792: If You Run Out Of Fuel And The Engine Stalls (Diesel Engine Only)
If the engine does not start after the above steps have been performed, wait for 10 seconds and try steps again. If the engine still does not start, contact your Toyota dealer. After starting the engine, depress the accelerator pedal lightly until the engine runs smoothly.
Page 793: If The Vehicle Becomes Stuck
8-2. Steps to take in an emergency If the vehicle becomes stuck Carry out the following procedures if the tires spin or the vehicle becomes stuck in mud, dirt or snow: Stop the engine. Set the parking brake and shift the shift lever to P (automatic transmission) or N (manual transmission).
Page 794 8-2. Steps to take in an emergency WARNING When attempting to free a stuck vehicle ■ If you choose to push the vehicle back and forth to free it, make sure the surrounding area is clear to avoid striking other vehicles, objects or people. The vehicle may also lunge forward or lunge back suddenly as it becomes free.
Page 795 8-2. Steps to take in an emergency HILUX_OM_OM0K440E_(GE)
Page 796: Vehicle Specifications
Vehicle specifications 9-1. Specifications Maintenance data (fuel, oil level, etc.)...796 Fuel information ....845 9-2. Customization Customizable features ..848 9-3. Initialization Item to initialize ....854 HILUX_OM_OM0K440E_(GE)
Page 797: Maintenance Data
9-1. Specifications Maintenance data (fuel, oil level, etc.) Dimensions 4930 mm (194.1 in.) Without rear bumper Short 4925 mm (193.9 in.) wheel- 5000 mm (196.9 in.) base With rear bumper 4995 mm (196.7 in.) 3, 5 5265 mm (207.3 in.) Overall 3, 6 Without rear bumper...
Page 798 9-1. Specifications Short wheelbase 2750 mm (108.3 in.) Wheel- 2WD models 3085 mm (121.5 in.) Long base wheel- 4WD models and Pre 3090 mm (121.7 in.) base Runner (Raised Body) 2WD models 1510 mm (59.4 in.) Front 1505 mm (59.3 in.) 4WD models and Pre Runner tread 1495 mm (58.9 in.)
Page 799 9-1. Specifications ■ How to identify exterior type Check the type of the exterior in the following illustrations.   Type A Type B  Type C HILUX_OM_OM0K440E_(GE)
Page 800 9-1. Specifications Weights (with towing hitch)  For South Africa 2700 kg 1TR-FE engine (5952 lb.) 2650 kg 2TR-FE engine (5842 lb.) 2870 kg 4WD models (6327 lb.) 1GD-FTV engine Single-cab Pre Runner 2750 kg models (Raised Body) (6063 lb.) 2810 kg 2WD models (6195 lb.)
Page 801 9-1. Specifications 120 kg 1GR-FE engine (265 lb.) 60 kg 1TR-FE engine (132 lb.) 100 kg 2TR-FE engine (220 lb.) 140 kg 4WD models (309 lb.) Drawbar 1GD-FTV load engine 110 kg Pre Runner (Raised Body) (243 lb.) 100 kg 2WD models (220 lb.) 2GD-FTV...
Page 802 9-1. Specifications  For Argentina 2650 kg 2TR-FE engine (5842 lb.) Single-cab 3000 kg 4WD models models (6614 lb.) 2GD-FTV engine Pre Runner 2750 kg (Raised Body) (6063 lb.) Gross 2870 kg vehicle 1GR-FE engine (6327 lb.) mass 2710 kg 2TR-FE engine (5975 lb.) Double-cab...
Page 803 9-1. Specifications 120 kg 1GR-FE engine (265 lb.) 100 kg 2TR-FE engine (220 lb.) 140 kg 4WD models (309 lb.) 1GD-FTV engine 110 kg Pre Runner (Raised Body) (243 lb.) Drawbar load 140 kg Single-cab models (309 lb.) models 130 kg Double-cab models (287 lb.) 2GD-FTV...
Page 804 9-1. Specifications  For TGN126L-DTMLK, GUN125L-DTFXH, GUN125L-DTFLH and GUN125L-DTFMH models for Azerbaijan, Armenia and Georgia Gasoline engine 2800 kg (6173 lb.) Gross vehicle mass Diesel engine 2910 kg (6415 lb.) Front 1400 kg (3086 lb.) Maximum permissible axle capacity Rear 1650 kg (3638 lb.) Drawbar load 60 kg (132 lb.)
Page 805 The vehicle identification number (VIN) is the legal identifier for your vehicle. This is the primary identification number for your Toyota. It is used in registering the ownership of your vehicle. This number is stamped on the rear right frame.
Page 806 9-1. Specifications Double-cab models (for GCC countries , Yemen, Iraq, Leba- Jordan [gasoline engine], and models made in Algeria and South Africa This number is also on the Cer- tification Regulation label (for GCC countries , Yemen, Iraq, Lebanon and Jordan [gasoline engine]) or manufacturer’s label (models made in Algeria and South Africa...
Page 807 9-1. Specifications Models made in South Africa (except for Algeria): This number is also on the left side of the windshield. : Saudi Arabia, Sultanate of Oman, Bahrain, United Arab Emirates, Qatar, Kuwait : See “Checking your vehicle’s model” if you are not sure of which model your vehicle is.
Page 808 9-1. Specifications Engine number ■ The engine number is stamped on the engine block as shown. 1GR-FE engine 1TR-FE and 2TR-FE engines   1GD-FTV and 2GD-FTV 5L-E engine   engines HILUX_OM_OM0K440E_(GE)
Page 809 9-1. Specifications Engine  1GR-FE engine Model 1GR-FE Type 6 cylinder V type, 4 cycle, gasoline   Bore and stroke 94.0 95.0 mm (3.70 3.74 in.) Displacement 3956 cm (241.4 cu.in.) Intake: 0.15  0.25 mm (0.006  0.010 in.) Valve clearance Exhaust: 0.29 ...
Page 810 9-1. Specifications  2TR-FE engine Model 2TR-FE Type 4 cylinder in line, 4 cycle, gasoline   Bore and stroke 95.0 95.0 mm (3.74 3.74 in.) Displacement 2694 cm (164.4 cu.in.) Valve clearance Automatic adjustment Drive belt tension Automatic adjustment 2WD models: With automatic 175 km/h (108 mph)
Page 811 9-1. Specifications  2GD-FTV engine Model 2GD-FTV 4 cylinder in line, 4 cycle, diesel Type (with turbocharger)   Bore and stroke 92.0 90.0 mm (3.62 3.54 in.) Displacement 2393 cm (146.0 cu.in.) Valve clearance Automatic adjustment Drive belt tension Automatic adjustment 175 km/h (108 mph) models...
Page 812 9-1. Specifications  5L-E engine Model 5L-E Type 4 cylinder in line, 4 cycle, diesel   Bore and stroke 99.5 96.0 mm (3.92 3.78 in.) Displacement 2986 cm (182.2 cu.in.) Intake: 0.20  0.30 mm (0.008  0.012 in.) Valve clearance Exhaust: 0.40 ...
Page 813 9-1. Specifications Fuel  Gasoline engine  Except for Argentina Unleaded gasoline only Fuel type  For Argentina Gasoline fuel Grade 3 Free of metal additives only 1GR-FE engine 95 (octane rating 91) or higher  Except for Argentina Research Octane 91 (octane rating 87) or higher 1TR-FE and...
Page 814 Engine oil selection ■ “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use Toyota approved “Toyota Genuine Motor Oil” or equivalent to satisfy the following grade and viscosity. Oil grade: 5W-30 and 10W-30: API grade SL “Energy-Conserving”, SM “Energy-Conserving”, SN...
Page 815 9-1. Specifications Oil viscosity (5W-30 is explained here as an example): • The 5W in 5W-30 indicates the characteristic of the oil which allows cold startability. Oils with a lower value before the W allow for easier starting of the engine in cold weather. •...
Page 816 Engine oil selection ■ “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use Toyota approved “Toyota Genuine Motor Oil” or equivalent to sat- isfy the following grade and viscosity. Oil grade: 5W-30 and 10W-30: API grade SL “Energy-Conserving”, SM “Energy-Conserving”, SN...
Page 817 9-1. Specifications Oil viscosity (5W-30 is explained here as an example): • The 5W in 5W-30 indicates the characteristic of the oil which allows cold startability. Oils with a lower value before the W allow for easier starting of the engine in cold weather. •...
Page 818 Engine oil selection ■ “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use Toyota approved “Toyota Genuine Motor Oil” or equivalent to satisfy the following grade and viscosity. Oil grade: 0W-20, 5W-20, 5W-30 and 10W-30: API grade SL “Energy-Conserving”, SM “Energy-Conserving”, SN...
Page 819 9-1. Specifications Oil viscosity (0W-20 is explained here as an example): • The 0W in 0W-20 indicates the characteristic of the oil which allows cold startability. Oils with a lower value before the W allow for easier starting of the engine in cold weather. •...
Page 820 Engine oil selection ■ “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use Toyota approved “Toyota Genuine Motor Oil” or equivalent to satisfy the following grade and viscosity. Oil grade: 0W-20, 5W-20, 5W-30 and 10W-30: API grade SL “Energy-Conserving”, SM “Energy-Conserving”, SN...
Page 821 9-1. Specifications Oil viscosity (0W-20 is explained here as an example): • The 0W in 0W-20 indicates the characteristic of the oil which allows cold startability. Oils with a lower value before the W allow for easier starting of the engine in cold weather. •...
Page 822 Engine oil selection ■ “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use Toyota approved “Toyota Genuine Motor Oil” or equivalent to satisfy the following grade and viscosity. Oil grade: API CF-4, CF or ACEA B3, B4, B5 or JASO DL-0...
Page 823 9-1. Specifications How to read oil container label: Japanese Automobile Standard Organization (JASO) DL-0 Mark is added to some oil containers to help you select the oil you should use. Oil viscosity (5W-30 is explained here as an example): • The 5W in 5W-30 indicates the characteristic of the oil which allows cold startability.
Page 824 Engine oil selection ■ “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use Toyota approved “Toyota Genuine Motor Oil” or equivalent to satisfy the following grade and viscosity. Oil grade: API CF-4, CF or ACEA B3, B4, B5 or JASO DL-0...
Page 825 7.0 L (7.4 qt., 6.2 Imp.qt.) : EURO V and VI are emission standards. If it is not clear that your vehicle meets relevant standards, contact your Toyota dealer. : The engine oil capacity is a reference quantity to be used when changing the engine oil.
Page 826 9-1. Specifications Engine oil selection ■ “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Toyota recommends the use of approved “Toyota Genuine Motor Oil”. Another motor oil of matching quality can also be used. Oil grade: ACEA C2 NOTICE Using engine oil other than ACEA C2 may damage the catalytic converter.
Page 827 Engine oil selection ■ “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use Toyota approved “Toyota Genuine Motor Oil” or equivalent to satisfy the following grade and viscosity. Oil grade: API CF-4, CF or ACEA B3, B4, B5 or JASO DL-0...
Page 828 9-1. Specifications How to read oil container label: Japanese Automobile Standard Organization (JASO) DL-0 Mark is added to some oil containers to help you select the oil you should use. Oil viscosity (10W-30 is explained here as an example): • The 10W in 10W-30 indicates the characteristic of the oil which allows cold startability.
Page 829 8.7 L (9.2 qt., 7.7 Imp.qt.) 5L-E engine 9.4 L (9.9 qt., 8.3 Imp.qt.) Use either of the following: • “Toyota Super Long Life Coolant” • Similar high-quality ethylene gly- col-based non-silicate, non-amine, Coolant type non-nitrite, and non-borate coolant...
Page 830 9-1. Specifications : EURO IV, V and VI are emission standards. If it is not clear that your vehi- cle meets relevant standards, contact your Toyota dealer. : Without heater : With heater : Without power heater : With power heater...
Page 831 9-1. Specifications Electrical system  Vehicles with maintenance type battery Battery Specific gravity read- 1.25 or higher ing at 20C (68F): If the specific gravity is lower than the standard value, charge the battery. Charging rates Quick charge 15 A max. Slow charge 5 A max.
Page 832 If replacement is necessary, contact your Toyota dealer. NOTICE Automatic transmission fluid type ■ Using transmission fluid other than “Toyota Genuine ATF WS” may cause deterioration in shift quality, locking up of your transmission accompanied by vibration, and ultimately damage the transmission of your vehicle. HILUX_OM_OM0K440E_(GE)
Page 833 Recommended oil viscosity SAE 75W : Your Toyota vehicle is filled with “Toyota Genuine Transfer Gear oil LF” at the factory. Use Toyota approved “Toyota Genuine Transfer Gear oil LF” or an equivalent oil of matching quality that satisfies the above specifications.
Page 834 4WD models and Pre Runner 3.65 L (3.86 qt., (Raised Body) 3.21 Imp.qt.) 3.60 L (3.80 qt., With rear differential lock 3.17 Imp.qt.) Toyota Genuine Differential gear Oil type and oil viscosity oil LT 75W-85 GL-5 or equiva- lent HILUX_OM_OM0K440E_(GE)
Page 835 (3.01 qt., 2.51 Imp.qt.) Pre Runner 3.75 L (Raised Body) (3.96 qt., 3.30 Imp.qt.) 3.60 L With rear differential lock (3.80 qt., 3.17 Imp.qt.) Toyota Genuine Diffe- Oil type and oil viscosity rential gear oil LT 75W- 85 GL-5 or equivalent HILUX_OM_OM0K440E_(GE)
Page 836 : See “Checking your vehicle’s mode l” if you are not sure of which model your vehicle is. (P. 12) : Your Toyota vehicle is filled with “Toyota Genuine Differential Gear Oil” at the factory. Use Toyota approved “Toyota Genuine Differential Gear Oil”...
Page 837 9-1. Specifications Brakes  Except for Latin American countries 87 mm (3.4 in.) 2WD models 88 mm (3.5 in.) Left-hand drive 4WD models 92 mm (3.6 in.) vehicles and Pre Runner 91 mm (3.6 in.) (Raised Body) Without 86 mm (3.4 in.) 2WD models 87 mm (3.4 in.) Right-hand...
Page 838 9-1. Specifications  For Latin American countries 87 mm (3.4 in.) 2WD models 88 mm (3.5 in.) Left-hand drive 4WD models and 88 mm (3.5 in.) vehicles Pre Runner 87 mm (3.4 in.) (Raised Body) Without 86 mm (3.4 in.) 2WD models 87 mm (3.4 in.) Right-hand...
Page 839 : Parking brake lever travel when pulled up with a force of 200 N (20 kgf, 45 lbf) : With 15 inch front wheel brake : With 16 inch front wheel brake : Contact your Toyota dealer, if you are not sure of which specifications your vehicle is equipped with. Chassis lubrication Spider Lithium base chassis grease, NLGI No.2...
Page 840 9-1. Specifications Steering Free play Less than 30 mm (1.2 in.) ® Power steering fluid type Automatic transmission fluid DEXRON II or III Tires and wheels 15 inch tires  Tire size 205/70R15C 106/104S Tire inflation Rear wheel Rear wheel pressure Front wheel (unladen)
Page 841 9-1. Specifications  16 inch tires (type A) Tire size 215/65R16C 106/104S Tire inflation Rear wheel Rear wheel pressure Front wheel (unladen) (full load) (Recommended kPa (kgf/cm kPa (kgf/cm kPa (kgf/cm cold tire inflation bar, psi) bar, psi) bar, psi) pressure) Single-cab 240 (2.4, 35)
Page 842 9-1. Specifications  17 inch tires (type A) Tire size 225/70R17C 108/106S Rear wheel Rear wheel Tire inflation Front wheel (unladen) (full load) pressure kPa (kgf/cm kPa (kgf/cm kPa (kgf/cm (Recommended bar, psi) bar, psi) bar, psi) cold tire inflation pressure) 240 (2.4, 35) 240 (2.4, 35)
Page 843 9-1. Specifications  18 inch tires Tire size 265/60R18 110H Tire inflation pressure Front wheel Front wheel Rear wheel Rear wheel (Recom- (unladen) (full load) (unladen) (full load) mended cold kPa (kgf/cm kPa (kgf/cm kPa (kgf/cm kPa (kgf/cm tire inflation or bar, psi) or bar, psi) or bar, psi)
Page 844 9-1. Specifications Light bulbs Light bulbs Type Headlights High/low beams (halogen headlights) 60/55 High beams (LED headlights) Halogen front fog lights Front position lights (halogen headlights) Except models made in Argentina Without daytime running lights With daytime running lights 21/5 Models made in Argentina Without daytime running lights 21/5...
Page 845 9-1. Specifications : The wattage differs depending on the specification. When replacing, use a light bulb with the same wattage as the original bulb. ■ Headlight manufacturer information (vehicles with halogen headlights [models made in Argentina The information is on the headlight units. : See “Checking your vehicle’s model”...
Page 846: Fuel Information
9-1. Specifications Fuel information ◆ Gasoline engine Except for Argentina  1GR-FE engine: You must only use unleaded gasoline. Select premium unleaded gasoline with a Research Octane Num- ber of 95 (octane rating 91) or higher for optimum engine perfor- mance.
Page 847 Use of ethanol blended gasoline in a gasoline engine  Except for Thailand Toyota allows the use of ethanol blended gasoline where the ethanol content is up to 10%. Make sure that the ethanol blended gasoline to be used has a Research Octane Number that follows the above.
Page 848 TOYOTA ARGENTINA SA assumes no liability for damages due to the use of diesel fuel with sulfur content above 10 ppm. Check this information at the service station before refueling.
Page 849: 9-2. Customization
The settings of these features can be changed using the multi-information display or at your Toyota dealer. Some function settings are changed simultaneously with other func- tions being customized. Contact your Toyota dealer for further details. Customizing vehicle features Changing using the multi-information display ■...
Page 850 9-2. Customization Customizable features Settings that can be changed using the multi-information display Settings that can be changed by your Toyota dealer Definition of symbols: O = Available, – = Not available Gauges, meters and multi-information display (P. 156, 160) ■...
Page 851 9-2. Customization  Vehicles with multi-information display type B Customized Function Default setting setting French Spanish Thai Language English – Portuguese Indonesian Arabic Units km (L/100 km) km (km/L) – Eco Driving Indicator – Light (Self-lighting) Drive Desired status switch settings –...
Page 852 9-2. Customization Customized Function Default setting setting Fuel con- sumption 10.0 – comparison Fuel price – (Baht) (Rupiah) Saving Currency – (Peso) (No currency unit) (Real) (Rand) : If equipped : For details about each function: P. 156, 160 : The default setting and the customized setting items that can be displayed vary according to country.
Page 853 — O function Driver’s door linked door — O unlocking function : If equipped : Setting that can be changed manually (P. 186) or at your Toyota dealer Smart entry & start system (P. 192) ■ Customized Function Default setting setting Smart entry &...
Page 854 9-2. Customization Turn signal lever (P. 281) ■ Customized Function Default setting setting Times of flashing of the — lane change signal flashers WARNING During customization ■ As the engine needs to be running during customization, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle.
Page 855: 9-3. Initialization
9-3. Initialization Item to initialize The following item must be initialized for normal system opera- tion after such cases as the battery is reconnected, or mainte- nance is performed on the vehicle. Item When to initialize Reference • When the tire inflation pressure is changed such as when changing travel- ing speed or load weight...
Page 856: Index
Index What to do if... (Troubleshooting) .....856 Alphabetical index ......860 For vehicles with navigation system, multimedia system with 8-inch display (P. 364) or multimedia system for TGN126L- DTTMK , refer to the “Navigation System Owner’s Manual” or “Navigation and Multimedia System Owner’s Manual” for information regarding the equipment listed below.
Page 857 You lose your keys ● If you lose your keys or mechanical keys, new genuine keys or mechanical keys can be made by your Toyota dealer. (P. 178) ● Vehicles with smart entry & start system: If you lose your electronic keys, the risk of vehicle theft increases signifi- cantly.
Page 858 What to do if... (Troubleshooting) If you think something is wrong The engine does not start (vehicles without smart entry & start system) ● Vehicles with manual transmission: Do you turn the key with the clutch pedal depressed firmly? (P. 250) ●...
Page 859 What to do if... (Troubleshooting) The steering wheel cannot be turned after the engine is stopped ● Vehicles without smart entry & start system: It is locked to prevent theft of the vehicle if the key is removed from the engine switch.
Page 860 What to do if... (Troubleshooting) An alarm is activated and the horn sounds (if equipped) ● Did anyone inside the vehicle open a door during setting the alarm? The sensor detects it and the alarm sounds. (P. 136) To stop the alarm, turn the engine switch to the “ON” position (vehicles with- out smart entry &...
Page 861: Alphabetical Index
Alphabetical index Alphabetical index General airbag precautions......49 A/C........601, 607 Locations of airbags....47 Air conditioning filter....702 Modification and Automatic air conditioning disposal of airbags ....53 system ........ 607 Side airbag operating Manual air conditioning conditions ......55 system ........
Page 862 Alphabetical index ® Automatic air conditioning Bluetooth audio ..... 404, 541 ® system Bluetooth phone Air conditioning filter....702 (audio system)....... 404 Automatic air conditioning Deleting the call history..418 system ........ 607 Making a call......425 Automatic disconnecting Managing speed dials... 425 differential ......
Page 863 Alphabetical index Child restraint system ....62 Clock......... 630 Child restraint system Clutch ........835 installation method....121 Coat hooks ....... 633 Fixed with a seat belt .... 122 Condenser........ 673 Fixed with an ISOFIX Console box ......622 lower anchorage ....124 Cooling system Points to remember....
Page 864 Alphabetical index Double locking system.... 134 If you think something is Downhill assist control wrong........739 system ........348 If your vehicle becomes DPF (Diesel Particulate stuck ........792 Filter) system ......351 If your vehicle has to be Warning light ......745 stopped in an Warning message ....
Page 865 Alphabetical index Engine oil Four-wheel drive system Capacity ........ 813 Front-wheel drive control Checking ....... 668 switch ......... 317 Oil level warning light .... 746 Warning light......744 Oil pressure warning light ..742 Front fog lights Preparing and checking Replacing light bulbs.....
Page 866 Alphabetical index Gauges........151 Identification Glove box ......... 622 Engine........807 Grocery bag hooks ....633 Vehicle ........804 Ignition switch (engine switch)......250, 253 Auto power off function ..258 Hands-free system Changing the engine (for cellular phone)..404, 543 switch modes......
Page 867 Alphabetical index Light Engine switch light ....618 Jack Fog light switch ..... 292 Vehicle-equipped jack... 758 Headlight switch....284 Jack handle ......763 Illuminated entry system ..620 Jam protection function Interior light ......619 Power windows ..... 216 Interior light list......
Page 868 Alphabetical index Mirrors Outside rear view mirrors ..212 Inside rear view mirror ..210 Adjusting and folding .... 212 Outside rear view mirror Outside rear view mirror defoggers......609 defoggers ......609 Outside rear view mirrors..212 Outside temperature Vanity mirror......
Page 869 Alphabetical index Rear fog light Cleaning and maintaining the Replacing light bulb....724 seat belt......641 Switch ........292 Emergency Locking Wattage......... 843 Retractor....... 44 Rear passengers’ seat belt How to wear your seat belt ..42 reminder light ......746 How your child should Rear seat wear the seat belt ....
Page 870 Alphabetical index Side airbags ....... 47 Sun visors ........ 629 Side doors ........ 182 Switch Side mirrors......212 Audio remote control Adjusting and folding..... 212 switches ....367, 451 Heaters ......... 609 Cruise control switch..... 303 Side turn signal lights “DISP”...
Page 871 Alphabetical index Tools ......... 760 Towing Tachometer ......152 Emergency towing ....733 Tailgate ........189 Towing hook ......736 Tail lights Trailer towing ....236, 237 Light switch ......284 Traction control ....... 340 Replacing light bulbs..... 724 Trailer towing ....236, 237 Wattage.........
Page 872 Alphabetical index Washer Checking....... 678 Warning buzzers Preparing and checking Fuel filter ....... 745 before winter....... 356 Key reminder......251 Switch ........295 Seat belt reminder....746 Washing and waxing ....636 Warning lights Weights........799 ABS........743 Wheels ........700 Automatic transmission fluid Replacing wheels....
Page 873 GAS STATION INFORMATION Auxiliary catch lever Fuel filler door P. 662 P. 300 Hood lock release Fuel filler door Tire inflation pressure lever opener P. 662 P. 300 P. 839 Fuel tank Short wheelbase 65 L (17.2 gal., 14.3 Imp.gal.) capacity Long wheelbase 80 L (21.1 gal., 17.6 Imp.gal.)

This manual is also suitable for:

Hilux dc

Toyota HILUX SC Owner's Manual

Table of Contents

1 For Safety and Security

Child Restraint Systems

2 Instrument Cluster

Operation of 3

4 Driving

Table of Contents

6 Interior Features

7 Maintenance and Care

8 When Trouble Arises

Quick Links

Chapters

Troubleshooting

Related Manuals for Toyota HILUX SC

Summary of Contents for Toyota HILUX SC