Toyota HILUX 2008 Owner's Manual page 219

Hide thumbs Also See for HILUX 2008:
Table of Contents

Advertisement

5. Position the jack at the correct jack
points as shown.
Two−wheel drive models
Front—Under the side rail
Rear—Under the rear axle housing
Four−wheel drive models
Front—Under the cross member
Rear—Under the rear axle housing
Make sure the jack is positioned on a
level and solid place.
208
—Raising your vehicle
40h006
6. After making sure no one is in the
vehicle, raise it high enough so that
the spare tire can be installed.
Remember you will need more ground
clearance when putting on the spare tire
than when removing the flat tire.
To raise the vehicle, insert the jack handle
end into the jack (it is a loose fit) and
turn it clockwise with the wheel nut
wrench, making sure the wheel nut wrench
remains firmly fitted onto the jack handle
extension. As the jack touches the vehicle
and begins to lift, double−check that it is
properly positioned.
CAUTION
Never get under the vehicle when the
vehicle is supported by the jack
alone.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents