Toyota HILUX 2008 Owner's Manual page 280

MANUAL TRANSMISSION
Oil capacity, L (qt., Imp. qt.):
1GR−FE and 1KD−FTV engines
Two−wheel drive models
2.6 (2.7, 2.3)
Four−wheel drive models
2.2 (2.3, 1.9)
2TR−FE engine 2.6 (2.7, 2.3)
Oil type:
Gear oil API GL−4 or GL−5
Recommended oil viscosity:
SAE 75W−90
AUTOMATIC TRANSMISSION
5−speed models—
Fluid capacity, L (qt., Imp. qt.):
Up to 10.4 (11.0, 9.2)
The fluid capacity is the quantity of refer-
ence. If replacement is necessary, contact
your Toyota dealer.
Fluid type:
Toyota Genuine ATF WS
Change automatic transmission fluid only
as necessary.
Generally, it is necessary to change auto-
matic transmission fluid only if your ve-
hicle is driven under one of the Special
Operating Conditions listed in your "War-
ranty and Service Booklet". When chang-
ing automatic transmission fluid, use only
"Toyota Genuine ATF WS" to aid in assur-
ing maximum transmission performance.
Notice: Using automatic transmission
fluid other than "Toyota Genuine ATF
WS" may cause deterioration in shift
quality, locking up of your transmission
accompanied by vibration, and ultimate-
ly damage the automatic transmission
of your vehicle.
Please contact your Toyota dealer for fur-
ther details.
4−speed models—
Fluid capacity (drain and refill),
L (qt., Imp. qt.):
Up to 2.0 (2.1, 1.8)
Fluid type:
Toyota Genuine ATF Type T−IV
Change automatic transmission fluid only
as necessary.
Generally, it is necessary to change auto-
matic transmission fluid only if your ve-
hicle is driven under one of the Special
Operating Conditions listed in your "War-
ranty and Service Booklet". When chang-
ing automatic transmission fluid, use only
"Toyota Genuine ATF Type T−IV" to aid in
assuring optimum transmission
mance.
Notice: Using automatic transmission
fluid other than "Toyota Genuine ATF
Type T−IV" may cause deterioration in
shift quality, locking up of your trans-
mission accompanied by vibration, and
ultimately damage the automatic trans-
mission of your vehicle.
Please contact your Toyota dealer for fur-
ther details.
TRANSFER
Oil capacity, L (qt., Imp. qt.):
1.0 (1.1, 0.9)
Oil type:
Gear oil API GL−4 or GL−5
Recommended oil viscosity:
SAE 75W−90
perfor-
269