Toyota HILUX 2008 Owner's Manual page 51

Hide thumbs Also See for HILUX 2008:
Table of Contents

Advertisement

Too high
Adjust to
a snug fit
Keep as low on hips as possible
Remove excess length of the belt and
adjust the belt position.
To shorten the belt, pull the free end of
the belt.
Position the lap belt as low as possible on
your hips—not on your waist, then adjust
it to a snug fit.
CAUTION
Both high−positioned and loose−fit-
ting lap belts could cause death or
serious injuries due to sliding under
the lap belt during a collision or oth-
er unintended event. Keep the lap
belt positioned as low on hips as
possible.
40
13h007
To release the belt, press the buckle
release button.
Vehicles with front bench seat:
Always place the latched belt on the cen-
ter seat when not in use.
—Seat belt pretensioners
13H098
The driver and front passenger seat
belt pretensioners (vehicles with sepa-
rate front seats) or driver and front out-
side passenger seat belt pretensioners
(vehicles with bench front seat) are de-
signed to be activated in response to
a severe frontal impact.
When the sensor detects a severe frontal
impact, the front seat belts are quickly
drawn back by the retractor so that the
belts snugly restrain the occupants.
The seat belt pretensioners are activated
even with no passenger in the front seat.
The seat belt pretensioners and SRS air-
bags may not operate together in all colli-
sions.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents