—Reinstalling wheel nuts
40h030
Steel wheel
40h017
Aluminum wheel
210
9. Reinstall all the wheel nuts finger
tight.
Reinstall the wheel nuts (tapered end in-
ward) and tighten them as much as you
can by hand. Press back on the tire and
see if you can tighten them more.
CAUTION
Never use oil or grease on the bolts
or nuts. Doing so may lead to over-
tightening the nuts and damaging the
bolts. The nuts may loosen and the
wheels may fall off, which could cau-
se serious accident. If there is oil or
grease on any bolt or nut, clean it.
—Lowering your vehicle
40h018
Two−wheel drive models
40h019
Four−wheel drive models